Prof. Dr. ALİ ALLAHVERDİ

Metrikler

Yayın

190

Yayın (WoS)

100

Yayın (Scopus)

126

Atıf (WoS)

4646

H-İndeks (WoS)

Atıf (Scopus)

5821

H-İndeks (Scopus)

Atıf (Scholar)

8900

H-İndeks (Scholar)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Biyografi

Ali Allahverdi is a Professor in the Department of Industrial Engineering of Gazi University since May 2023. Before this appointment, he served as a faculty member in the Department of Industrial and Management Systems Engineering of Kuwait University from September 15, 1995 to May 15, 2023. He worked for two years at Marmara University, Istanbul, Turkey, before joining Kuwait University in 1995. He also worked as a visiting scholar at the Department of Industrial Engineering of Rensselaer Polytechnic Institute, New York, USA from June 15, 2010 to August 20, 2011. He received his B.S. in Petroleum Engineering from Istanbul Technical University, and his M.Sc. and Ph.D. degrees in Industrial Engineering, from Rensselaer Polytechnic Institute, New York, USA. He received Top Cited-Article Award from the European Journal of Operational Research in 2012. Furthermore, he received Distinguished Researcher Award in 2003. This award was in recognition of excellent performance and outstanding achievement in research for the previous ten years. Moreover, he received Research Performance Award in 2004 which was in recognition of exceptional results of outstanding significance and demonstrated research output of a conducted project. He also received the Dissertation Prize from Rensselaer Polytechnic Institute, Troy, New York, in recognition of outstanding academic achievement and promise for a successful career in 1993. He has published about 130 papers, receiving more than 8000 citations, in well-known international journals. Moreover, he presented more than 100 papers at international conferences. Furthermore, he has served on the scientific committee of more than 100 international conferences and gave keynote speeches at several international conferences. He has been the editor of European Journal of Industrial Engineering since 2007, and served as a guest editor for the European Journal of Operations Research, the International Journal of Production Research, and the International Journal of Operations Research. He is currently serving as associate editor of several international journals and on the editorial board of several other international journals.

Duyurular & Dokümanlar

Ders Notu

IE207-Formula Sheet

Ders Notu

10.12.2025

IE207-Formula Sheet

IE207-FormulaSheet.pdf

IE207-2025 Fall-Syllabus-Allahverdi-Section TR-01

Ders Notu

16.09.2025

IE207-2025 Fall-Syllabus-Allahverdi-Section TR-01

IE207-2025 Fall-Syllabus-Allahverdi....docx

IE207-2025 Fall-Syllabus-Allahverdi-Section TR-02

Ders Notu

16.09.2025

IE207-2025 Fall-Syllabus-Allahverdi-Section TR-02

IE207-2025 Fall-Syllabus-Allahverdi....docx

IE207-LectureSlides-Fall-2025

Ders Notu

8.09.2025

IE207-LectureSlides-Fall-2025

IE207-LectureSlides-Fall-2025.pdf

Duyuru

Repeating Students

Duyuru

10.09.2025

Repeating Students

Pearson MyLab - Extending Course Ac....pdf

IE 207 Probability Student MyLab Registration Instruction 2025 Fall (TR-01)

Duyuru

10.09.2025

IE 207 Probability Student MyLab Registration Instruction 2025 Fall (TR-01)

IE 207 Probability Student MyLab Re....pdf

MyLab Student Registration Guide

Duyuru

10.09.2025

MyLab Student Registration Guide

MLM - MyLab Student Registration Gu....pdf

IE 207 Probability Student MyLab Registration Instruction 2025 Fall (TR-02)

Duyuru

10.09.2025

IE 207 Probability Student MyLab Registration Instruction 2025 Fall (TR-02)

IE 207 Probability Student MyLab Re....pdf

Ödev

Homework Groups

Ödev

30.09.2025

Homework Groups.

Homework Groups.pptx

Eğitim Bilgileri

1990 - 1992

Doktora

Rensselaer Polytechnic Institute, College of Engineering, Industrial Engineering Department, Amerika Birleşik Devletleri

1988 - 1990

Yüksek Lisans

Rensselaer Polytechnic Institute, College of Engineering, Industrial Engineering Department, Amerika Birleşik Devletleri

1982 - 1986

Lisans

İstanbul Teknik Üniversitesi, Türkiye

Yaptığı Tezler

1992

Bütünleşik Doktora

Scheduling on multiple unreliable sources

Rensselaer Polytechnic Institute, College of Engineering, Department of Industrial Engineering

Yabancı Diller

C2 Ustalık

İngilizce

Araştırma Alanları

Çizelgeleme (Scheduling)

Akademik Ünvanlar / Görevler

2023 - Devam Ediyor

Prof. Dr.

Gazi Üniversitesi, -, Faculty of Engineering, Industrial Engineering Department

2003 - 2023

Prof. Dr.

Kuwait University, College of Engineering, Industrial Engineering Department

2010 - 2011

Prof. Dr.

Rensselaer Polytechnic Institute, College of Engineering, Industrial Engineering Department

1998 - 2003

Doç. Dr.

Kuwait University, College of Engineering, Industrial Engineering Department

1995 - 1998

Yrd. Doç. Dr.

Kuwait University, College of Engineering, Industrial Engineering Department

1993 - 1995

Yrd. Doç. Dr.

Marmara Üniversitesi, Mühendislik Fakültesi, Industrial Engineering Department

1989 - 1992

Araştırma Görevlisi

Rensselaer Polytechnic Institute, College of Engineering, Industrial Engineering Department

1987 - 1989

Araştırma Görevlisi

İstanbul Teknik Üniversitesi

Makaleler

2025

1. From cradle to grave: evaluating bread production and waste using multicriteria optimization and life cycle assessment

Aljaber S., Aleisa E., ALLAHVERDİ A.

Journal of Material Cycles and Waste Management , cilt.27, sa.4, ss.2684-2698, 2025 (SCI-Expanded, Scopus)

2023

2. Three-Machine Flowshop Scheduling Problem to Minimize Makespan with Interval Processing Times

ALLAHVERDİ A., Allahverdi M.

International Journal of Advanced Research in Engineering Innovation , 2023 (Hakemli Dergi)

2023

3. Algorithms for three-machine flowshop scheduling problem to minimize makespan with uncertain processing times

Allahverdi A., Allahverdi M.

RAIRO-OPERATIONS RESEARCH , cilt.57, sa.4, ss.1733-1743, 2023 (SCI-Expanded, Scopus)

2022

4. More effective heuristics for a two-machine no-wait flowshop to minimize maximum lateness

Aydilek H., Aydilek A., Allahverdi M., Allahverdi A.

International Journal of Industrial Engineering Computations , cilt.13, sa.4, ss.543-556, 2022 (SCI-Expanded, Scopus)

2022

5. An algorithm for a no-wait flowshop scheduling problem for minimizing total tardiness with a constraint on total completion time

Allahverdi A., Aydilek H., Aydilek A.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING COMPUTATIONS , cilt.13, sa.1, ss.43-50, 2022 (SCI-Expanded, Scopus)

2022

6. A survey of scheduling problems with uncertain interval/bounded processing/setup times

ALLAHVERDİ A.

JOURNAL OF PROJECT MANAGEMENT , cilt.7, sa.4, ss.255-264, 2022 (ESCI, Scopus)

2022

7. A Review of Scheduling Problems with Bounded Processing/Setup Times

Allahverdi A.

International Journal of Advanced Research in Engineering Innovation , cilt.4, ss.64-69, 2022 (Hakemli Dergi)

2021

8. Algorithms to minimize total completion time in a two-machine flowshop problem with uncertain set-up times

Aydilek H., Aydilek A., Allahverdi A.

ENGINEERING OPTIMIZATION , sa.8, ss.1417-1430, 2021 (SCI-Expanded, Scopus)

2021

9. A BETTER DOMINANCE RELATION AND HEURISTICS FOR TWO-MACHINE NO-WAIT FLOWSHOPS WITH MAXIMUM LATENESS PERFORMANCE MEASURE

Allahverdi M., Aydilek H., Aydilek A., Allahverdi A.

JOURNAL OF INDUSTRIAL AND MANAGEMENT OPTIMIZATION , sa.4, ss.1973-1991, 2021 (SCI-Expanded, Scopus)

2021

10. Minimizing total completion time for flowshop scheduling problem with uncertain processing times

Allahverdi M., Allahverdi A.

RAIRO-OPERATIONS RESEARCH , 2021 (SCI-Expanded, Scopus)

2021

11. Asean Journal of Engineering Education

Allahverdi A., Alhashemi J., Sarkar K.

Asean Journal of Engineering Education , cilt.5, ss.23-29, 2021 (Hakemli Dergi)

2021

12. A Recent Senior Design Project of the Industrial and Management Systems Engineering Program at Kuwait University

Allahverdi A.

International Journal of Advanced Research in Education and Society , cilt.3, ss.138-144, 2021 (Hakemli Dergi)

2021

13. Industrial and Management Systems Engineering program assessment based on the new ABET student outcomes

Allahverdi A., Alhashemi J., Sarkar K.

Asean Journal of Engineering Education , cilt.5, ss.1-8, 2021 (Hakemli Dergi)

2021

14. Four-machine flowshop scheduling problem with uncertain processing times to minimize mean completion time

Allahverdi M., ALLAHVERDİ A.

International Journal of Business and Technology Management , cilt.3, ss.44-48, 2021 (Hakemli Dergi)

2021

15. An Improved Algorithm for Minimizing Makespan on Flowshops with Uncertain Processing Times

Allahverdi A., Allahverdi M.

International Journal of Engineering Research and Development , cilt.13, ss.521-530, 2021 (Hakemli Dergi)

2020

16. MINIMIZING TOTAL COMPLETION TIME IN A TWO-MACHINE NO-WAIT FLOWSHOP WITH UNCERTAIN AND BOUNDED SETUP TIMES

Allahverdi M., Allahverdi A., Lin B. M.

JOURNAL OF INDUSTRIAL AND MANAGEMENT OPTIMIZATION , sa.5, ss.2439-2457, 2020 (SCI-Expanded, Scopus)

2020

17. Algorithms for four-machine flowshop scheduling problem with uncertain processing times to minimize makespan

Allahverdi M., Allahverdi A.

RAIRO-OPERATIONS RESEARCH , sa.2, ss.529-553, 2020 (SCI-Expanded, Scopus)

2020

18. Sample Senior Design Projects of Industrial Engineering Program at Kuwait University

ALLAHVERDİ A.

ASEAN Journal of Engineering Education , cilt.4, ss.11-18, 2020 (Hakemli Dergi)

2020

19. No-wait flowshop scheduling problem with separate setup times to minimize total tardiness subject to makespan

Allahverdi A., Aydilek H., Aydilek A.

APPLIED MATHEMATICS AND COMPUTATION , 2020 (SCI-Expanded, Scopus)

2018

20. Two-machine no-wait flowshop scheduling problem with uncertain setup times to minimize maximum lateness

Allahverdi A., Allahverdi M.

COMPUTATIONAL & APPLIED MATHEMATICS , sa.5, ss.6774-6794, 2018 (SCI-Expanded)

2018

21. Scheduling in manufacturing systems: new trends and perspectives

Allahverdi A., Pesch E., Pinedo M., Werner F.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.19, ss.6333-6335, 2018 (SCI-Expanded, Scopus)

2018

22. No-wait flowshop scheduling problem with two criteria; total tardiness and makespan

Allahverdi A., Aydilek H., Aydilek A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.2, ss.590-601, 2018 (SCI-Expanded, Scopus)

2018

23. Samples of senior design projects in industrial engineering

Allahverdi A.

Global Journal of Engineering Education , cilt.20, sa.3, ss.213-216, 2018 (Scopus)

2018

24. Minimizing mean completion time for a two-machine no-wait flowshop scheduling problem

Allahverdi M., ALLAHVERDİ A.

CONTEMPORARY ISSUES IN BUSINESS & ECONOMICS , ss.270-273, 2018 (Hakemli Dergi)

2017

25. Algorithms for minimizing the number of tardy jobs for reducing production cost with uncertain processing times

Aydilek A., Aydilek H., Allahverdi A.

APPLIED MATHEMATICAL MODELLING , ss.982-996, 2017 (SCI-Expanded, SSCI, Scopus)

2017

26. Minimising maximum tardiness in assembly flowshops with setup times

Aydilek A., Aydilek H., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.24, ss.7541-7565, 2017 (SCI-Expanded, Scopus)

2016

27. A survey of scheduling problems with no-wait in process

Allahverdi A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.665-686, 2016 (SCI-Expanded, Scopus)

2016

28. Two-stage assembly scheduling problem for minimizing total tardiness with setup times

Allahverdi A., Aydilek H., Aydilek A.

APPLIED MATHEMATICAL MODELLING , sa.17-18, ss.7796-7815, 2016 (SCI-Expanded, Scopus)

2016

29. Continuous improvement in the Industrial and Management Systems Engineering programme at Kuwait University

Aldowaisan T., Allahverdi A.

EUROPEAN JOURNAL OF ENGINEERING EDUCATION , sa.4, ss.369-379, 2016 (ESCI, Scopus)

2016

30. Improving educational objectives of the Industrial and Management Systems Engineering programme at Kuwait University

Aldowaisan T., Allahverdi A.

EUROPEAN JOURNAL OF ENGINEERING EDUCATION , sa.3, ss.252-262, 2016 (ESCI, Scopus)

2016

31. Minimizing the number of tardy jobs on a two-stage assembly flowshop

Allahverdi A., Aydilek A., Aydilek H.

JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING , sa.6, ss.391-403, 2016 (ESCI, Scopus)

2015

32. The third comprehensive survey on scheduling problems with setup times/costs

Allahverdi A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.2, ss.345-378, 2015 (SCI-Expanded, Scopus)

2015

33. Production in a two-machine flowshop scheduling environment with uncertain processing and setup times to minimize makespan

Aydilek A., Aydilek H., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.9, ss.2803-2819, 2015 (SCI-Expanded, Scopus)

2015

34. The two stage assembly flowshop scheduling problem to minimize total tardiness

Allahverdi A., Aydilek H.

JOURNAL OF INTELLIGENT MANUFACTURING , sa.2, ss.225-237, 2015 (SCI-Expanded, Scopus)

2015

35. Total tardiness performance in m-machine no-wait flowshops with separate setup times

Aldowaisan T., ALLAHVERDİ A.

Intelligent Control and Automation , cilt.6, ss.38-44, 2015 (Hakemli Dergi)

2015

36. Assessment of student outcomes of the Industrial and Management Systems Engineering programme at Kuwait University

Allahverdi A., Aldowaisan T.

Global Journal of Engineering Education , cilt.17, sa.3, ss.103-112, 2015 (Scopus)

2015

37. A unique and effective way of teaching a capstone/senior design course

Allahverdi A.

Global Journal of Engineering Education , cilt.17, sa.3, ss.132-137, 2015 (Scopus)

2015

38. Assigning patients to rooms in a private hospital in Kuwait

Alsabah H., Aldaihani M., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF SERVICES AND OPERATIONS MANAGEMENT , cilt.22, ss.304-322, 2015 (Scopus)

2015

39. No-wait flowshops to minimize total tardiness with setup times

Aldowaisan T., ALLAHVERDİ A.

Intelligent Control and Automation , cilt.6, ss.38-44, 2015 (Hakemli Dergi)

2014

40. Single machine scheduling problem with interval processing times to minimize mean weighted completion time

Allahverdi A., Aydilek H., Aydilek A.

COMPUTERS & OPERATIONS RESEARCH , ss.200-207, 2014 (SCI-Expanded, Scopus)

2014

41. Total completion time with makespan constraint in no-wait flowshops with setup times

Allahverdi A., Aydilek H.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.724-734, 2014 (SCI-Expanded, Scopus)

2013

42. An artificial immune system heuristic for two-stage multi-machine assembly scheduling problem to minimize total completion time

Al-Anzi F. S., Allahverdi A.

JOURNAL OF MANUFACTURING SYSTEMS , sa.4, ss.825-830, 2013 (SCI-Expanded, Scopus)

2013

43. Algorithms for no-wait flowshops with total completion time subject to makespan

Allahverdi A., Aydilek H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , sa.9-12, ss.2237-2251, 2013 (SCI-Expanded, Scopus)

2013

44. A polynomial time heuristic for the two-machine flowshop scheduling problem with setup times and random processing times

Aydilek H., Allahverdi A.

APPLIED MATHEMATICAL MODELLING , sa.12-13, ss.7164-7173, 2013 (SCI-Expanded, Scopus)

2013

45. Editorial

Allahverdi A., Ruiz R., Framinan J. M.

European Journal of Industrial Engineering , cilt.7, sa.1, ss.1, 2013 (SCI-Expanded, Scopus)

2013

46. Untitled

ALLAHVERDİ A., Ruiz R., Framinan J. M.

EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING , sa.1, ss.1, 2013 (SCI-Expanded, Scopus)

2013

47. New heuristics for no-wait flowshops with performance measures of makespan and mean completion time

Aydilek H., ALLAHVERDİ A.

International Journal of Operations Research , cilt.10, ss.29-37, 2013 (Hakemli Dergi)

2013

48. Increasing the profitability and competitiveness in a production environment with random and bounded setup times

Aydilek A., Aydilek H., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.1, ss.106-117, 2013 (SCI-Expanded, SSCI, Scopus)

2012

49. Heuristics for no-wait flowshops with makespan subject to mean completion time

Aydilek H., Allahverdi A.

APPLIED MATHEMATICS AND COMPUTATION , sa.1, ss.351-359, 2012 (SCI-Expanded, Scopus)

2012

50. MINIMIZING TOTAL TARDINESS IN NO-WAIT FLOWSHOPS

Aldowaisan T., ALLAHVERDİ A.

FOUNDATIONS OF COMPUTING AND DECISION SCIENCES , sa.3, ss.149-162, 2012 (ESCI, Scopus)

2012

51. No-wait flowshop scheduling problem to minimize the number of tardy jobs

Aldowaisan T. A., Allahverdi A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , sa.1-4, ss.311-323, 2012 (SCI-Expanded, Scopus)

2012

52. Minimizing the total completion time in a two-machine flowshop with sequence-independent setup times

Ladhari T., Msakni M., Allahverdi A.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.4, ss.445-459, 2012 (SCI-Expanded, SSCI, Scopus)

2012

53. Better heuristics for a two-stage multi-machine assembly scheduling problem to minimize total completion time

AL-Anzi F., ALLAHVERDİ A.

International Journal of Operations Research , cilt.9, ss.66-75, 2012 (Hakemli Dergi)

2011

54. IMECS 2011 - International MultiConference of Engineers and Computer Scientists 2011: Preface

Abdelkader Y. H., Ait-Kadi D., Al-Najjar B., Allahverdi A., Amavasai B. P., Henggeler C., et al.

IMECS 2011 - International MultiConference of Engineers and Computer Scientists 2011 , cilt.2, 2011 (Scopus)

2010

55. Untitled

ALLAHVERDİ A., Ruiz R., Framinan J. M.

EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING , cilt.138, sa.1, ss.752-1, 2010 (SCI-Expanded, Scopus)

2010

56. Heuristics for the two-machine flowshop scheduling problem to minimize maximum lateness with bounded processing times

Allahverdi A., Aydilek H.

COMPUTERS & MATHEMATICS WITH APPLICATIONS , sa.5, ss.1374-1384, 2010 (SCI-Expanded, Scopus)

2010

57. Two-machine flowshop scheduling problem with bounded processing times to minimize total completion time

Aydilek H., Allahverdi A.

COMPUTERS & MATHEMATICS WITH APPLICATIONS , sa.2, ss.684-693, 2010 (SCI-Expanded, Scopus)

2010

58. Weighted Multi-Skill Resources Project Scheduling

AL-Anzi F., Al-Zamel K., ALLAHVERDİ A.

Journal of Software Engineering and Applications , cilt.3, ss.1125, 2010 (Hakemli Dergi)

2010

59. Heuristics for the two-machine flowshop scheduling problem to minimise makespan with bounded processing times

Allahverdi A., Aydilek H.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.21, ss.6367-6385, 2010 (SCI-Expanded, Scopus)

2009

60. The two-stage assembly scheduling problem to minimize total completion time with setup times

Allahverdi A., Al-Anzi F. S.

COMPUTERS & OPERATIONS RESEARCH , sa.10, ss.2740-2747, 2009 (SCI-Expanded, Scopus)

2009

61. Heuristics for a two-stage assembly flowshop with bicriteria of maximum lateness and makespan

Al-Anzi F. S., Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.9, ss.2682-2689, 2009 (SCI-Expanded, Scopus)

2009

62. Minimizing the bicriteria of makespan and maximum tardiness with an upper bound on maximum tardiness

Ruiz R., Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.4, ss.1268-1283, 2009 (SCI-Expanded, Scopus)

2009

63. New heuristics for no-wait flow shops with a linear combination of makespan and maximum lateness

Ruiz R., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.20, ss.5717-5738, 2009 (SCI-Expanded, SSCI, Scopus)

2009

64. Three-machine flowshop scheduling problem to minimize maximum lateness with bounded setup and processing times

ALLAHVERDİ A.

Journal of Operations and Logistics , cilt.2, ss.1-11, 2009 (Hakemli Dergi)

2009

65. Permutation flow shops with exact time lags to minimise maximum lateness

Fondrevelle J., Oulamara A., Portmann M., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.23, ss.6759-6775, 2009 (SCI-Expanded, Scopus)

2009

66. Optimising a help desk performance at a telecommunication company

Abdulmalek F., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF ENGINEERING SYSTEMS MODELLING AND SIMULATION , sa.2-3, ss.160-164, 2009 (ESCI)

2008

67. The significance of reducing setup times/setup costs

Allahverdi A., Soroush H.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.978-984, 2008 (SCI-Expanded, Scopus)

2008

68. A survey of scheduling problems with setup times or costs

Allahverdi A., Ng C., Cheng T., Kovalyov M. Y.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.985-1032, 2008 (SCI-Expanded, Scopus)

2008

69. The two-stage assembly flowshop scheduling problem with bicriteria of makespan and mean completion time

Allahverdi A., Al-Anzi F. S.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , sa.1-2, ss.166-177, 2008 (SCI-Expanded, Scopus)

2008

70. THREE-MACHINE FLOWSHOP SCHEDULING PROBLEM TO MINIMIZE MAKESPAN WITH BOUNDED SETUP AND PROCESSING TIMES

ALLAHVERDİ A.

JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING , sa.1, ss.52-61, 2008 (ESCI)

2008

71. Untitled

ALLAHVERDİ A., Ruiz R., Framinan J. M.

EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING , sa.1, 2008 (SCI-Expanded, Scopus)

2008

72. Senior design course in industrial engineering at Kuwait University

Savasar M., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF CONTINUING ENGINEERING EDUCATION AND LIFE-LONG LEARNING , sa.2, ss.253-263, 2008 (ESCI, Scopus)

2007

73. No-wait flowshop with separate setup times to minimize maximum lateness

Ruiz R., Allahverdi A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , sa.5-6, ss.551-565, 2007 (SCI-Expanded, SSCI, Scopus)

2007

74. Some effective heuristics for no-wait flowshops with setup times to minimize total completion time

Ruiz R., Allahverdi A.

ANNALS OF OPERATIONS RESEARCH , sa.1, ss.143-171, 2007 (SCI-Expanded, Scopus)

2007

75. Batching deteriorating items with applications in computer communication and reverse logistics

Al-Anzi F. S., Allahverdi A., Kovalyov M. Y.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.1002-1011, 2007 (SCI-Expanded, Scopus)

2007

76. A self-adaptive differential evolution heuristic for two-stage assembly scheduling problem to minimize maximum lateness with setup times

Al-Anzi F. S., Allahverdi A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.1, ss.80-94, 2007 (SCI-Expanded, Scopus)

2007

77. Three-machine flowshop scheduling problem to minimize total completion time with bounded setup and processing times

ALLAHVERDİ A.

Decision making in manufacturing and services , cilt.1, ss.5-23, 2007 (Hakemli Dergi)

2007

78. The three-machine flowshop scheduling problem to minimise maximum lateness with separate setup times

Ng C., ALLAHVERDİ A., AL-Anzi F., Cheng T.

INTERNATIONAL JOURNAL OF OPERATIONAL RESEARCH , cilt.2, ss.135-155, 2007 (Scopus)

2007

79. Untitled

ALLAHVERDİ A., Ruiz R., Framinan J. M.

EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING , sa.1, ss.1-4, 2007 (SCI-Expanded)

2006

80. Two-machine flowshop scheduling problem to minimize maximum lateness with bounded setup and processing times

ALLAHVERDİ A.

KUWAIT JOURNAL OF SCIENCE & ENGINEERING , sa.2, ss.233-252, 2006 (SCI-Expanded)

2006

81. Evolutionary heuristics and an algorithm for the two-stage assembly scheduling problem to minimize makespan with setup times

Allahverdi A., Al-Anzi F. S.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.22, ss.4713-4735, 2006 (SCI-Expanded, Scopus)

2006

82. Empirically discovering dominance relations for scheduling problems using an evolutionary algorithm

Al-Anzi F., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.22, ss.4701-4712, 2006 (SCI-Expanded, Scopus)

2006

83. Using mixed graph coloring to minimize total completion time in job shop scheduling

Al-Anzi F. S., Sotskov Y. N., Allahverdi A., Andreev G. V.

APPLIED MATHEMATICS AND COMPUTATION , sa.2, ss.1137-1148, 2006 (SCI-Expanded, Scopus)

2006

84. Two-machine flowshop scheduling problem to minimize total completion time with bounded setup and processing times

Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS , sa.1, ss.386-400, 2006 (SCI-Expanded, Scopus)

2006

85. A PSO and a Tabu search heuristics for the assembly scheduling problem of the two-stage distributed database application

Allahverdi A., Al-Anzi F. S.

COMPUTERS & OPERATIONS RESEARCH , sa.4, ss.1056-1080, 2006 (SCI-Expanded, Scopus)

2006

86. A branch-and-bound algorithm for three-machine flowshop scheduling problem to minimize total completion time with separate setup times

Allahverdi A., Al-Anzi F. S.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.3, ss.767-780, 2006 (SCI-Expanded, Scopus)

2006

87. A hybrid tabu search heuristic for the two-stage assembly scheduling problem

AL-Anzi F., ALLAHVERDİ A.

International Journal of Operations Research , cilt.3, ss.109-119, 2006 (Hakemli Dergi)

2006

88. Economic order quantity with uncertain inflation: A case study

Zeydan M., Allahverdi A.

International Journal of Industrial Engineering : Theory Applications and Practice , cilt.13, sa.3, ss.320-327, 2006 (SCI-Expanded, Scopus)

2006

89. Scheduling multi-stage parallel-processor services to minimize average response time

Allahverdi A., Al-Anzi F.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.1, ss.101-110, 2006 (SCI-Expanded, SSCI, Scopus)

2005

90. Two-machine flowshop scheduling problem to minimize makespan with bounded set-up and processing times

Allahverdi A.

International Journal of Agile Manufacturing , cilt.8, sa.2, ss.145-153, 2005 (Scopus)

2005

91. Two-machine, no-wait flowshop scheduling problem to minimize maximum lateness with separate set-up and removal times

Fondrevelle J., Allahverdi A., Oulamara A.

International Journal of Agile Manufacturing , cilt.8, sa.2, ss.165-174, 2005 (Scopus)

2005

92. Three-machine flowshop scheduling to minimize maximum lateness

Allahverdi A.

International Journal of Agile Manufacturing , cilt.8, sa.2, ss.155-163, 2005 (Scopus)

2005

93. Using a Hybrid Evolutionary Algorithm to Minimize Variance in Response Time for Multimedia Object Requests

AL-Anzi F., ALLAHVERDİ A.

JOURNAL OF MATHEMATICAL MODELLING AND ALGORITHMS , cilt.4, ss.435-453, 2005 (Scopus)

2005

94. Stochastic two-machine flowshop scheduling problem with total completion time criterion

Soroush H., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE , sa.2, ss.159-171, 2005 (SCI-Expanded, Scopus)

2005

95. A polynomial genetic based algorithm to minimize maximum lateness in a two-stage flowshop with setup times

ALLAHVERDİ A., AL-Anzi F., Gupta J.

International Journal of Operations Research , cilt.2, ss.89-100, 2005 (Hakemli Dergi)

2005

96. Two-machine flowshop scheduling problem to minimize makespan with bounded setup and processing times

ALLAHVERDİ A.

International Journal of Agile Manufacturing , cilt.8, ss.145-153, 2005 (Hakemli Dergi)

2004

97. New heuristics for m-machine no-wait flowshop to minimize total completion time

Aldowaisan T., Allahverdi A.

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE , sa.5, ss.345-352, 2004 (SCI-Expanded, SSCI, Scopus)

2004

98. Three-machine no-wait flowshop with separate setup and removal times to minimize total completion time

Aldowaisan T., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE , sa.2, ss.113-123, 2004 (SCI-Expanded, Scopus)

2004

99. Flowshop scheduling problem to minimize total completion time with random and bounded processing times

Sotskov Y., Allahverdi A., Lai T.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.3, ss.277-286, 2004 (SCI-Expanded, SSCI, Scopus)

2004

100. A new heuristic for m-machine flowshop scheduling problem with bicriteria of makespan and maximum tardiness

Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.2, ss.157-180, 2004 (SCI-Expanded, Scopus)

2004

101. A Hybrid Simulated Annealing Heuristic for Multimedia Object Requests Scheduling Problem

AL-Anzi F., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF COMPUTERS AND APPLICATIONS , cilt.26, ss.1-6, 2004 (Scopus)

2004

102. Stochastically minimizing makespan on a three-machine flowshop

ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE , cilt.11, sa.2, ss.124-131, 2004 (SCI-Expanded, Scopus)

2004

103. No-wait flowshops with bicriteria of makespan and maximum lateness

Allahverdi A., Aldowaisan T.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.1, ss.132-147, 2004 (SCI-Expanded, Scopus)

2004

104. A branch-and-bound algorithm for the three-machine flowshop scheduling problem with bicriteria of makespan andtotal flowtime

Yeh W., Allahverdi A.

International Transactions in Operational Research , cilt.11, sa.3, ss.323-339, 2004 (Scopus)

2003

105. Optimal selection of module instances for modular products in reconfigurable manufacturing systems

YİĞİT A. S., Allahverdi A.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , sa.17, ss.4063-4074, 2003 (SCI-Expanded, Scopus)

2003

106. New heuristics for no-wait flowshops to minimize makespan

Aldowaisan T., Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.8, ss.1219-1231, 2003 (SCI-Expanded, Scopus)

2003

107. The two- and m-machine flowshop scheduling problems with bicriteria of makespan and mean flowtime

Allahverdi A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.2, ss.373-396, 2003 (SCI-Expanded, Scopus)

2003

108. Two-machine flowshop minimum-length scheduling problem with random and bounded processing times

Allahverdi A., Sotskov Y.

International Transactions in Operational Research , cilt.10, sa.1, ss.65-76, 2003 (Scopus)

2003

109. Two-machine flowshop scheduling problem to minimize makespan or total completion time with random and bounded setup times

Allahverdi A., Aldowaisan T., Sotskov Y. N.

International Journal of Mathematics and Mathematical Sciences , cilt.2003, sa.39, ss.2475-2486, 2003 (Scopus)

2002

110. Two-machine flowshop scheduling to minimize total completion time with separate setup and removal times

ALLAHVERDİ A., Aldowaisan T.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE , sa.3, ss.275-286, 2002 (SCI-Expanded, Scopus)

2002

111. Scheduling on three serial duplicate stations in assembly lines with multiple criteria

ALLAHVERDİ A., Savsar M.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE , sa.3, ss.265-274, 2002 (SCI-Expanded, Scopus)

2002

112. No-wait flowshops with bicriteria of makespan and total completion time

Allahverdi A., Aldowaisan T.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.9, ss.1004-1015, 2002 (SCI-Expanded, SSCI, Scopus)

2002

113. Optimizing modular product design for reconfigurable manufacturing

YİĞİT A. S., Ulsoy A. G., Allahverdi A.

JOURNAL OF INTELLIGENT MANUFACTURING , sa.4, ss.309-316, 2002 (SCI-Expanded, Scopus)

2002

114. Using two-machine flowshop with maximum lateness objective to model multimedia data objects scheduling problem for WWW applications

Allahverdi A., Al-Anzi F. S.

COMPUTERS & OPERATIONS RESEARCH , sa.8, ss.971-994, 2002 (SCI-Expanded, Scopus)

2002

115. New heuristics to minimize total completion time in m-machine flowshops

Allahverdi A., Aldowaisan T.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS , sa.1, ss.71-83, 2002 (SCI-Expanded, Scopus)

2002

116. Flexible multistage parallel-server scheduling for Internet service architecture

AL-Anzi F., ALLAHVERDİ A.

INTERNATIONAL JOURNAL OF PARALLEL AND DISTRIBUTED SYSTEMS AND NETWORKS , cilt.5, ss.134-142, 2002 (Scopus)

2001

117. Minimizing total completion time in a no-wait flowshop with sequence-dependent additive changeover times

Allahverdi A., Aldowaisan T.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.4, ss.449-462, 2001 (SCI-Expanded, SSCI, Scopus)

2001

118. Stochastic proportionate flowshop scheduling with setups

Allahverdi A., Savsar M.

COMPUTERS & INDUSTRIAL ENGINEERING , sa.3-4, ss.357-369, 2001 (SCI-Expanded, Scopus)

2001

119. The Tricriteria Two-Machine Flowshop Scheduling Problem

Allahverdi A.

International Transactions in Operational Research , cilt.8, sa.4, ss.403-425, 2001 (Scopus)

2001

120. The relationship between three-tiered client-server internet database connectivity and two-machine flowshop

AL-Anzi F., ALLAHVERDİ A.

International Journal of Parallel and Distributed Systems and Networks , cilt.4, ss.94-101, 2001 (Scopus)

2000

121. Minimizing mean flowtime in a two-machine flowshop with sequence-independent setup times

Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.2, ss.111-127, 2000 (SCI-Expanded, SSCI, Scopus)

2000

122. No-wait and separate setup three-machine flowshop with total completion time criterion

Allahverdi A., Aldowaisan T.

International Transactions in Operational Research , cilt.7, sa.3, ss.245-264, 2000 (Scopus)

1999

123. A review of scheduling research involving setup considerations

Allahverdi A., Gupta J. N., Aldowaisan T.

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE , sa.2, ss.219-239, 1999 (SCI-Expanded, SSCI, Scopus)

1999

124. Stochastically minimizing total flowtime in flowshops with no waiting space

Allahverdi A.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.1, ss.101-112, 1999 (SCI-Expanded, Scopus)

1999

125. Algorithms for scheduling jobs on two serial duplicate stations

Savsar M., Allahverdi A.

International Transactions in Operational Research , cilt.6, sa.4, ss.411-422, 1999 (Scopus)

1998

126. Total flowtime in no-wait flowshops with separated setup times

Aldowaisan T., Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.9, ss.757-765, 1998 (SCI-Expanded, Scopus)

1998

127. Job lateness in flowshops with setup and removal times separated

ALLAHVERDİ A., Aldowaisan T.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.9, ss.1001-1006, 1998 (SCI-Expanded, SSCI, Scopus)

1998

128. Dual criteria scheduling on a two-machine flowshop subject to random breakdowns

Allahverdi A.

INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH , cilt.5, ss.317-327, 1998 (Hakemli Dergi)

1997

129. Scheduling in stochastic flowshops with independent setup, processing and removal times

Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.10, ss.955-960, 1997 (SCI-Expanded, Scopus)

1997

130. Stochastic machine dominance in flowshops

Allahverdi A., Fatih Tatari M.

COMPUTERS & INDUSTRIAL ENGINEERING , sa.4, ss.735-741, 1997 (SCI-Expanded, Scopus)

1996

131. Two-machine proportionate flowshop scheduling with breakdowns to minimize maximum lateness

Allahverdi A.

COMPUTERS & OPERATIONS RESEARCH , sa.10, ss.909-916, 1996 (SCI-Expanded, Scopus)

1996

132. Simulation of different rules in stochastic flowshops

Allahverdi A., Tatari M. F.

COMPUTERS & INDUSTRIAL ENGINEERING , sa.1-2, ss.209-212, 1996 (SCI-Expanded, Scopus)

1996

133. Stochastic scheduling and dynamic programming - Koole,GM

ALLAHVERDİ A.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.10, ss.1313-1314, 1996 (SCI-Expanded, SSCI, Scopus)

1995

134. 2-STAGE PRODUCTION SCHEDULING WITH SEPARATED SET-UP TIMES AND STOCHASTIC BREAKDOWNS

ALLAHVERDİ A.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , sa.7, ss.896-904, 1995 (SCI-Expanded, SSCI, Scopus)

1995

135. SCHEDULING ON A 2-MACHINE FLOWSHOP SUBJECT TO RANDOM BREAKDOWNS WITH A MAKESPAN OBJECTIVE FUNCTION

Allahverdi A., Mittenthal J.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , sa.2, ss.376-387, 1995 (SSCI, Scopus)

1994

136. SCHEDULING ON M PARALLEL MACHINES SUBJECT TO RANDOM BREAKDOWNS TO MINIMIZE EXPECTED MEAN FLOW TIME

ALLAHVERDİ A., MITTENTHAL J.

NAVAL RESEARCH LOGISTICS , sa.5, ss.677-682, 1994 (SCI-Expanded, Scopus)

1994

137. 2-MACHINE ORDERED FLOWSHOP SCHEDULING UNDER RANDOM BREAKDOWNS

Allahverdi A., Mittenthal J.

MATHEMATICAL AND COMPUTER MODELLING , sa.2, ss.9-17, 1994 (SCI-Expanded)

1994

138. Optimal Policies for a Deterministic Two-Machine Semi-ordered Flowshop with Maximum Lateness Objective

ALLAHVERDİ A.

INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH , cilt.6, ss.47-54, 1994 (Scopus)

1992

139. ROBUST ESTIMATION METHODS FOR EXPONENTIAL DATA - A MONTE-CARLO COMPARISON

Willemain T. R., Allahverdi A., DeSautels P., Eldredge J., Gur O., Miller M., et al.

COMMUNICATIONS IN STATISTICS-SIMULATION AND COMPUTATION , sa.4, ss.1043-1075, 1992 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

2023

1. Scheduling on a three-machine flowshop with uncertain processing times to minimize makespan

ALLAHVERDİ A., Allahverdi M.

Kuala Lumpur, Malaysia, 3rd International Virtual Conference on Education, Social Sciences and Technology, Kuala-Lumpur, Malezya, 12 Ağustos 2023, (Tam Metin Bildiri)

2022

2. Scheduling Problems with Bounded Processing or Setup Times

ALLAHVERDİ A.

Kuala, Lumpur, Malaysiam, 3rd International Multidisciplinary Conference on Education, Engineering and Social Sciences, Kuala-Lumpur, Malezya, 26 Kasım 2022, (Tam Metin Bildiri)

2021

3. Minimizing total completion time for stochastic flowshops

Allahverdi M., ALLAHVERDİ A.

Istanbul, Turkiye, 4th International E-Conference on Mathematical Advances and Applications, İstanbul, Türkiye, 26 Mayıs 2021, (Tam Metin Bildiri)

2021

4. Four-machine flowshop scheduling problem with uncertain processing times to minimize mean completion time

Allahverdi M., ALLAHVERDİ A.

Kuala Lumpur, Malaysia, International E-Conference on Applied Sciences, Society, and Economics, Kuala-Lumpur, Malezya, 04 Mayıs 2021, (Tam Metin Bildiri)

2018

5. Minimizing makespan in flowshops with bounded processing times

Allahverdi M., ALLAHVERDİ A.

Sanliurfa, Turkey, VI. International GAP Engineering Conference, Türkiye, 08 Kasım 2018, (Tam Metin Bildiri)

2018

6. Minimizing mean completion time for bounded processing times in flowshops

Allahverdi M., ALLAHVERDİ A.

Sanliurfa, Turkey, VI. International GAP Engineering Conference, Türkiye, 08 Kasım 2018, (Tam Metin Bildiri)

2018

7. The two-machine no-wait flowshop problem with uncertain setup times

ALLAHVERDİ A., Allahverdi M.

Tokat, Turkey, International Conference on Contemporary Issues in Business & Economics, Türkiye, 14 Temmuz 2018, (Tam Metin Bildiri)

2018

8. Minimizing mean completion time for a two-machine no-wait flowshop scheduling problem

Allahverdi M., ALLAHVERDİ A.

Tokat, Turkey, International Conference on Contemporary Issues in Business & Economics, Türkiye, 14 Temmuz 2018, (Tam Metin Bildiri)

2014

9. Minimizing total completion time in no-wait flowshops with setup times

ALLAHVERDİ A., Aydilek H.

New York, USA, International Conference on Industrial Electronics and Systems Engineering, Amerika Birleşik Devletleri, 05 Haziran 2014, (Tam Metin Bildiri)

2012

10. A new heuristic for the queries scheduling problem on distributed database systems to minimize mean completion time

Allahverdi A., Al-Anzi F. S.

21st International Conference on Software Engineering and Data Engineering, SEDE 2012, Los Angeles, CA, Amerika Birleşik Devletleri, 27 - 29 Haziran 2012, ss.93-97, (Tam Metin Bildiri)

2012

11. Assembly flowshop scheduling problem to minimize total tardiness

ALLAHVERDİ A., Aydilek H.

Harvard, Cambridge, USA, American Conference on Applied Mathematics, Amerika Birleşik Devletleri, 25 Ocak 2012, (Tam Metin Bildiri)

2010

12. Project scheduling problem with weighted multi-skill resources: Enhancing the effeciancy of project scheduling

Al-Anzi F. S., Al-Zamel K., Allahverdi A.

2010 International Conference on Computational Intelligence and Software Engineering, CiSE 2010, Wuhan, Çin, 10 - 12 Aralık 2010, (Tam Metin Bildiri)

2009

13. Heuristic Algorithms for Minimizing Total Completion Time in a Two-Machine Flowshop with Sequence-Independent Setup

Msakni M., Ladhari T., ALLAHVERDİ A.

Troyes, France, 39th International Conference on Computers & Industrial Engineering, Fransa, 06 Haziran 2009, (Tam Metin Bildiri)

2009

14. Heuristic algorithms for minimizing total completion time in a two-machineflowshop with sequence-independent setup times

Msakni M. K., Ladhari T., Allahverdi A.

2009 International Conference on Computers and Industrial Engineering, CIE 2009, Troyes, Fransa, 6 - 09 Temmuz 2009, ss.90-95, (Tam Metin Bildiri)

2008

15. Two-stage assembly flowshop scheduling problem with maximum lateness and makespan

Allahverdi A., Al-Anzi F. S.

38th International Conference on Computers and Industrial Engineering 2008, Beijing, Çin, 31 Ekim - 02 Kasım 2008, cilt.2, ss.2021-2028, (Tam Metin Bildiri)

2008

16. The two-stage assembly flowshop scheduling problem with setup times

Allahverdi A., Al-Anzi F. S.

38th International Conference on Computers and Industrial Engineering 2008, Beijing, Çin, 31 Ekim - 02 Kasım 2008, cilt.2, ss.2029-2035, (Tam Metin Bildiri)

2008

17. Two-Stage Assembly Flowshop Scheduling Problem with Setup Times

ALLAHVERDİ A., AL-Anzi F.

Sakarya, Turkey, Sixth International Symposium on Intelligent Manufacturing Systems, Türkiye, 14 Ekim 2008, (Tam Metin Bildiri)

2008

18. Minimization of makespan and maximum tardiness subject to a maximum tardiness bound in flowshop problems

Ruiz R., ALLAHVERDİ A.

Istanbul, Turkey,Eleventh Inte rnational Workshop on Project Management and Scheduling, Türkiye, 28 Nisan 2008, (Tam Metin Bildiri)

2007

19. Three-Machine Flowshop Scheduling Problem to Minimize Total Completion Time with Bounded Setup and Processing Times

ALLAHVERDİ A.

Melaka, Malaysia, International Conference on Engineering & ICT: Meeting the Challenges of Advanced Manufacturing, Malezya, 27 Kasım 2007, (Tam Metin Bildiri)

2007

20. Senior design course in Industrial Engineering at Kuwait University

Savasar M., ALLAHVERDİ A.

Kuwait, Second International Conference on Engineering Education and Training, Kuveyt, 09 Nisan 2007, (Tam Metin Bildiri)

2006

21. Assembly scheduling problem to minimize maximum lateness

ALLAHVERDİ A., AL-Anzi F.

Hammamet, Tunisia, Third International Conference on Advances in Mechanical Engineering and Mechanics, Tunus, 17 Aralık 2006, (Tam Metin Bildiri)

2006

22. Fast genetic algorithms for lateness minimization no-wait flowshop with setup times

Ruiz R., ALLAHVERDİ A.

Iceland, 21st European Conference on Operational Research, İzlanda, 02 Temmuz 2006, (Özet Bildiri)

2006

23. Two-stage assembly scheduling problem to minimize makespan with setup times

ALLAHVERDİ A.

Poznan, Poland, Tenth International Workshop on Project Management and Scheduling, Polonya, 26 Nisan 2006, (Tam Metin Bildiri)

2006

24. Stochastic local search methods for no-wait flowshops with sequence independent setup times

Ruiz R., ALLAHVERDİ A.

Poznan, Poland, Tenth International Workshop on Project Management and Scheduling, Polonya, 26 Nisan 2006, (Tam Metin Bildiri)

2006

25. Computer assembly scheduling problem

Ai-Anzi F. S., Allahverdi A.

ICSSSM'06: 2006 International Conference on Service Systems and Service Management, Troyes, Fransa, 25 - 27 Ekim 2006, cilt.2, ss.1188-1191, (Tam Metin Bildiri)

2005

26. Minimizing makespan on a two-machine flowshop with unknown setup and processing times

ALLAHVERDİ A.

Marrakech, Morocco, International Conference on Industrial Engineering and Systems Management, Fas, 16 Mayıs 2005, (Tam Metin Bildiri)

2005

27. A new tabu search heuristic for the two-stage assembly scheduling problem

AL-Anzi F., ALLAHVERDİ A.

Marrakech, Morocco, International Conference on Industrial Engineering and Systems Management, Fas, 16 Mayıs 2005, (Tam Metin Bildiri)

2004

28. Scheduling problem with random processing times to minimize total completion time

ALLAHVERDİ A., Sotskov Y.

Kuwait, International Mechanical Engineering Conference, Kuveyt, 05 Aralık 2004, (Tam Metin Bildiri)

2004

29. A genetic algorithm for experimental dominance relations in scheduling problems

AL-Anzi F., ALLAHVERDİ A.

Kuwait, International Mechanical Engineering Conference, Kuveyt, 05 Aralık 2004, (Tam Metin Bildiri)

2004

30. The two-stage assembly flowshop scheduling problem

ALLAHVERDİ A., AL-Anzi F.

Kuwait, International Mechanical Engineering Conference, Kuveyt, 05 Aralık 2004, (Tam Metin Bildiri)

2004

31. Heuristics for the two-stage assembly scheduling problem

ALLAHVERDİ A., AL-Anzi F.

Sakarya, Turkey, Fourth International Symposium on Intelligent Manufacturing Systems, Türkiye, 06 Eylül 2004, (Tam Metin Bildiri)

2004

32. An evolutionary algorithm for empirical dominance relations in scheduling problems

AL-Anzi F., ALLAHVERDİ A.

Sakarya, Turkey, Fourth International Symposium on Intelligent Manufacturing Systems, Türkiye, 06 Eylül 2004, (Tam Metin Bildiri)

2004

33. Three-Site Distributed Database Scheduling Problem

ALLAHVERDİ A., AL-Anzi F.

Nancy, France, Ninth International Workshop on Project Management and Scheduling, Fransa, 26 Nisan 2004, (Tam Metin Bildiri)

2004

34. Empirically Discovering Dominance Relations for Scheduling Problems

AL-Anzi F., ALLAHVERDİ A.

Nancy, France, Ninth International Workshop on Project Management and Scheduling, Fransa, 26 Nisan 2004, (Tam Metin Bildiri)

2003

35. Scheduling requests on multi-stage multi-server to increase quality of service

Allahverdi A., Al-Anzi F. S.

IFIP TC6 / WG6.2 and WG6.7 2nd International Conference on Network Control and Engineering for QoS, Security and Mobility, Net-Con 2003, Muscat, Umman, 13 - 15 Ekim 2003, cilt.133, ss.14-25, (Tam Metin Bildiri)

2002

36. Minimizing average service time in flexible multi-server internet architecture

AL-Anzi F., ALLAHVERDİ A.

Miedzyzdroje, Poland, Ninth International Multi-Conference of Advanced Computer Systems on Production System Design, Supply Chain Management and Logistics, Polonya, 23 Ekim 2002, (Tam Metin Bildiri)

2002

37. Multimedia object requests scheduling for minimizing Variance of Response Time

ALLAHVERDİ A., AL-Anzi F.

Miedzyzdroje, Poland, Ninth International Multi-Conference of Advanced Computer Systems on Production System Design, Supply Chain Management and Logistics, Polonya, 23 Ekim 2002, (Tam Metin Bildiri)

2002

38. No-wait flowshop scheduling with multi-criteria

ALLAHVERDİ A., Aldowaisan T.

Valencia, Spain, Eighth International Workshop on Project Management and Scheduling, İspanya, 03 Nisan 2002, (Tam Metin Bildiri)

2002

39. Multimedia Objects Scheduling in WWW to Minimize Completion Time Variance

AL-Anzi F., ALLAHVERDİ A.

Valencia, Spain, Eighth International Workshop on Project Management and Scheduling, İspanya, 03 Nisan 2002, (Tam Metin Bildiri)

2002

40. Flowshop scheduling with random and bounded setup times

ALLAHVERDİ A., Aldowaisan T., Sotskov Y.

Valencia, Spain, Eighth International Workshop on Project Management and Scheduling, İspanya, 03 Nisan 2002, (Tam Metin Bildiri)

2001

41. Scheduling on Assembly Lines with Serial Duplicate Stations

Savasar M., ALLAHVERDİ A.

Amman, Jordan, First International Industrial Engineering Conference, IIEC 2001, Ürdün, 23 Eylül 2001, (Tam Metin Bildiri)

2001

42. Bicriteria scheduling on an m-machine no-wait flowshop

ALLAHVERDİ A., Aldowaisan T.

Amman, Jordan, First International Industrial Engineering Conference, IIEC 2001, Ürdün, 23 Eylül 2001, (Tam Metin Bildiri)

2001

43. Two-machine flowshop scheduling with bounded processing times

Sotskov Y., ALLAHVERDİ A.

Aussois, France, Fourth Workshop on Models and Algorithms for Planning and Scheduling Problems, Fransa, 17 Haziran 2001, (Tam Metin Bildiri)

2001

44. Total completion time minimization in a two or three machines flowshops with bounded processing times

Sotskov Y., ALLAHVERDİ A.

Bonn, Germany, Conference of the European Chapter on Combinatorial Optimization, ECCO XIV, Almanya, 31 Mayıs 2001, (Tam Metin Bildiri)

2000

45. Modeling multimedia data objects allocation problem for Internet using two-machine flowshop

ALLAHVERDİ A., AL-Anzi F.

Osnabruck, Germany, Seventh International Workshop on Project Management and Scheduling, Almanya, 17 Nisan 2000, (Tam Metin Bildiri)

Bilimsel Dergilerdeki Faaliyetler

2015 - Devam Ediyor

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING COMPUTATIONS

Editörler Kurulu Üyesi

2013 - Devam Ediyor

Operations Research Perspectives

Editörler Kurulu Üyesi

2013 - Devam Ediyor

JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING

Editörler Kurulu Üyesi

2008 - Devam Ediyor

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

Editörler Kurulu Üyesi

2006 - Devam Ediyor

EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING

Editör

2018 - 2018

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

Özel Sayı Editörü

2004 - 2012

JOURNAL OF THE CHINESE INSTITUTE OF INDUSTRIAL ENGINEERS

Editörler Kurulu Üyesi

2005 - 2011

CENTRAL EUROPEAN JOURNAL OF OPERATIONS RESEARCH

Yardımcı Editör/Bölüm Editörü

2008 - 2008

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

Özel Sayı Editörü

Bilimsel Kuruluşlardaki Üyelikler / Görevler

2018 - Devam Ediyor

Industrial Engineering and Operations Management (IEOM) Society

Asosiye Üye

2015 - Devam Ediyor

World Institute for Engineering and Technology Education

Üye

2005 - Devam Ediyor

IAENG (International Association of Engineers) Society of Industrial Engineers

Üye

2005 - Devam Ediyor

The International Society of Agile Manufacturing (ISAM)

Üye

2001 - Devam Ediyor

The Institute of Industrial Engineers

Üye

1995 - Devam Ediyor

The Institute for Operations Research and the Management Sciences (INFORMS)

Üye

2005 - 2015

The International Institute of Innovation, Industrial Engineering and Entrepreneurship

Üye

Bilimsel Yayınlarda Hakemlikler

Nisan 2023

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Şubat 2023

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

SCI Kapsamındaki Dergi

Haziran 2021

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Mayıs 2020

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Mayıs 2019

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Haziran 2018

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Haziran 2017

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Haziran 2016

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Temmuz 2015

CENTRAL EUROPEAN JOURNAL OF OPERATIONS RESEARCH

SCI Kapsamındaki Dergi

Haziran 2015

COMPUTERS & OPERATIONS RESEARCH

SCI Kapsamındaki Dergi

Ocak 2015

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Ekim 2014

JOURNAL OF MANUFACTURING SYSTEMS

SCI Kapsamındaki Dergi

Temmuz 2014

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Ağustos 2013

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Mayıs 2012

COMPUTERS & INDUSTRIAL ENGINEERING

SCI Kapsamındaki Dergi

Mart 2012

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Ekim 2011

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY

SCI Kapsamındaki Dergi

Ekim 2011

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING : THEORY APPLICATIONS AND PRACTICE

SCI Kapsamındaki Dergi

Şubat 2011

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Aralık 2010

JOURNAL OF MATHEMATICAL MODELLING AND ALGORITHMS

SCI Kapsamındaki Dergi

Ekim 2010

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS

SCI Kapsamındaki Dergi

Şubat 2010

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Ekim 2009

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

SCI Kapsamındaki Dergi

Ocak 2009

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Mayıs 2008

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Mart 2008

INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Ekim 2007

ANNALS OF OPERATIONS RESEARCH

SCI Kapsamındaki Dergi

Ocak 2007

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Aralık 2006

JOURNAL OF SCHEDULING

SCI Kapsamındaki Dergi

Ekim 2006

INTERNATIONAL JOURNAL OF FLEXIBLE MANUFACTURING SYSTEMS

SCI Kapsamındaki Dergi

Şubat 2006

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Temmuz 2005

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Haziran 2004

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Kasım 2003

INFORMS Journal on Computing

SCI Kapsamındaki Dergi

Mayıs 2003

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Kasım 2002

JOURNAL OF COMBINATORIAL OPTIMIZATION

SCI Kapsamındaki Dergi

Şubat 2002

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Şubat 2001

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Şubat 2000

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH

SCI Kapsamındaki Dergi

Kongre ve Sempozyum Katılımı Faaliyetleri

14 Ağustos 2020 - 15 Ağustos 2020

Global Joint Conference on Industrial Engineering and Its Application Areas

Davetli Konuşmacı

İstanbul-Türkiye

20 Nisan 2019 - 22 Nisan 2019

VI. the International Conference on Artificial Intelligence and Applied Mathematics in Engineering

Davetli Konuşmacı

Antalya-Türkiye

08 Kasım 2018 - 10 Kasım 2018

VI. International GAP Engineering Conference

Davetli Konuşmacı

Şanlıurfa-Türkiye

14 Ekim 2014 - 16 Ekim 2014

44th International Conference on Computers and Industrial Engineering

Davetli Konuşmacı

İstanbul-Türkiye

18 Şubat 2009 - 19 Şubat 2009

The Sixth International Industrial Engineering Conference

Davetli Konuşmacı

Tehran-İran

Davetli Konuşmalar

Şubat 2009

Manufacturing scheduling with setups

Seminer

University of Antwerp-Belçika

Ocak 2007

Flowshop scheduling with separate setup times

Seminer

The Polytechnic University of Valencia-İspanya

Ocak 2005

Scheduling with setup times

Seminer

The Hong Kong Polytechnic University-Hong Kong

Ağustos 2004