Yayınlar & Eserler

Yayın Ağı
Makaleler 40
Tümü (40)
SCI-E, SSCI, AHCI (35)
SCI-E, SSCI, AHCI, ESCI (38)
ESCI (3)
Scopus (38)
TRDizin (1)

1. Enhanced strength and ductility in an additively manufactured Al10SiMg alloy at cryogenic temperatures

Naeem M., Rehman A. U., Romero Resendiz L., Salamci E., Aydin H., Ansari P., et al.
Communications Materials , cilt.6, sa.1, 2025 (ESCI, Scopus) identifier

2. Geometrik optimizasyon ile uydu birincil yapısal parçalarının eklemeli imalat teknolojisine uygun tasarımı ile kütle azaltımı

çam b., CANYURT O. E.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.31, sa.5, ss.712-720, 2025 (ESCI, TRDizin) identifier identifier

3. Investigation on selective laser-melted AlSi10Mg micro-struts: influence of processing parameters on dimensional accuracy, molten pool morphology and microhardness

Eren O., Sezer H. K., Yüksel N., Bakhtarı A. R., Canyurt O. E.
RAPID PROTOTYPING JOURNAL , cilt.30, sa.8, ss.1556-1578, 2024 (SCI-Expanded, Scopus) identifier identifier

4. A Review on Laser Beam Shaping Application in Laser-Powder Bed Fusion

Bakhtari A. R., SEZER H. K., CANYURT O. E., EREN O., Shah M., Marimuthu S.
Advanced Engineering Materials , cilt.26, sa.14, 2024 (SCI-Expanded, Scopus) identifier

5. Deep learning-enabled design for tailored mechanical properties of SLM-manufactured metallic lattice structures

EREN O., YÜKSEL N., BÖRKLÜ H. R., SEZER H. K., CANYURT O. E.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE , cilt.130, 2024 (SCI-Expanded, Scopus) identifier identifier

6. A systematic review of Inconel 939 alloy parts development via additive manufacturing process

Raza S. A., CANYURT O. E., SEZER H. K.
Heliyon , cilt.10, sa.3, 2024 (SCI-Expanded, Scopus) identifier identifier

7. Review of artificial intelligence applications in engineering design perspective

YÜKSEL N., BÖRKLÜ H. R., SEZER H. K., CANYURT O. E.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE , cilt.118, 2023 (SCI-Expanded, Scopus) identifier

8. CaCO3 ve SiO2 nano parçacıkların reçineye ilavesi ile cam elyaf kompozit malzemelerin mukavemeti

Tuncer C., Canyurt O. E.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.28, sa.4, ss.493-498, 2022 (ESCI)

9. THE EFFECT OF PENTAGONAL AND OCTAGONAL JOINT DESIGN ON THE FATIGUE STRENGTH OF POLYMER-MATRIX COMPOSITE MATERIALS

Ersan Ç., Canyurt O. E.
MATERIALI IN TEHNOLOGIJE , cilt.54, sa.1, ss.143-148, 2020 (SCI-Expanded, Scopus) identifier identifier

10. The Effect of Nanoparticle Additive on the Mechanical Properties of Glass Fiber Composite Materials

Tuncer C., Canyurt O. E.
ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.752-755, 2019 (SCI-Expanded, Scopus) identifier identifier

11. A new approach for calculating the stiffness of bolted connections

Canyurt O. E., Sekercioglu T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.230, sa.2, ss.426-435, 2016 (SCI-Expanded, Scopus) identifier

12. Optimization of strength of friction stir welded joints for AISI 430 ferritic stainless steels by genetic algorithm

Bilgin M. B., Meran C., Canyurt O. E.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.77, ss.2221-2233, 2015 (SCI-Expanded, Scopus) identifier identifier

13. Development of the positive mean stress diagrams using genetic algorithm approach

Sekercioglu T., Canyurt O. E.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , cilt.37, sa.3, ss.306-313, 2014 (SCI-Expanded, Scopus) identifier identifier

14. Joint strength of friction stir welded AISI 304 austenitic stainless steels

Meran C., Canyurt O. E.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.104, sa.12, ss.1197-1204, 2013 (SCI-Expanded, Scopus) identifier identifier

15. Effect of Tool Angle on Friction Stir Weldability of AISI 430

Bilgin M. B., Meran C., Canyurt O. E.
WELDING JOURNAL , cilt.92, sa.1, ss.42-46, 2013 (SCI-Expanded, Scopus) identifier

16. Fatigue strength estimation of adhesively bonded tongue and groove joint of thick woven composite sandwich structures using genetic algorithm approach

Canyurt O. E., Meran C.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.33, ss.80-88, 2012 (SCI-Expanded, Scopus) identifier identifier

17. The effects of tool rotation speed and traverse speed on friction stir welding of AISI 304 austenitic stainless steel

Meran C., Canyurt O. E.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.102, sa.4, ss.420-428, 2011 (SCI-Expanded, Scopus) identifier identifier

18. Strength estimation of adhesively bonded tongue and groove joint of thick composite sandwich structures using genetic algorithm approach

Canyurt O. E., Meran C., Uslu M.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.30, sa.5, ss.281-287, 2010 (SCI-Expanded, Scopus) identifier identifier

19. Friction Stir Welding of Austenitic Stainless Steels

Meran C., Canyurt O. E.
Journal of Achievements in Materials and Manufacturing Engineering , cilt.43, sa.1, ss.432-439, 2010 (Scopus)

20. Cellular genetic algorithm technique for the multicriterion design optimization

Canyurt O. E., Hajela P.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION , cilt.40, ss.201-214, 2010 (SCI-Expanded, Scopus) identifier identifier

21. Modeling and prediction of Turkey's electricity consumption using Artificial Neural Networks

Kavaklioglu K., Ceylan H., Ozturk H. K., Canyurt C. E.
ENERGY CONVERSION AND MANAGEMENT , cilt.50, sa.11, ss.2719-2727, 2009 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

22. Estimation of laser hybrid welded joint strength by using genetic algorithm approach

Canyurt O. E., Kim H. R., Lee K. Y.
MECHANICS OF MATERIALS , cilt.40, sa.10, ss.825-831, 2008 (SCI-Expanded, Scopus) identifier identifier

23. Application of genetic algorithm (GA) technique on demand estimation of fossil fuels in Turkey

Canyurt C. E., Ozturk H. K.
ENERGY POLICY , cilt.36, sa.7, ss.2562-2569, 2008 (SCI-Expanded, SSCI, Scopus) Sürdürülebilir Kalkınma identifier identifier

24. Fatigue strength estimation of butt welded joints in magnesium AZ31 alloy using the genetic algorithm

Karakas O., Canyurt O. E., Gulsoz A.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.39, sa.3, ss.234-240, 2008 (SCI-Expanded, Scopus) identifier identifier

25. The Effect Of Design On Adhesive Joints Of Thick Composite Sandwich Structures

CANYURT O. E., MERAN C., USLU UYSAL M.
Journal of Achievements in Materials and Manufacturing Engineering , cilt.31, sa.2, ss.301-305, 2008 (Scopus)

26. A SAND approach based on cellular computation models for analysis and optimization

Canyurt O. E., Hajela P.
ENGINEERING OPTIMIZATION , cilt.39, sa.4, ss.381-396, 2007 (SCI-Expanded, Scopus) identifier identifier

27. Modeling and application of genetic algorithm (GA) approach to estimating the future total energy input values

Canyurt O. E., Ozturk H. K., Hepbasli A., Utlu Z.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.29, sa.10, ss.861-871, 2007 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

28. Three different applications of genetic algorithm (GA) search techniques on oil demand estimation

Canyurt C. E., Ozturk H. K.
ENERGY CONVERSION AND MANAGEMENT , cilt.47, ss.3138-3148, 2006 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

29. Genetic algorithm (GA) approaches for the transport energy demand estimation: Model development and application

Canyurt O. E., Ozturk H. K., Hepbasli A., Utlu Z.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.28, sa.15, ss.1405-1413, 2006 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

30. An application of genetic algorithm search techniques to the future total exergy input/output estimation

Ozturk H., Canyurt O. E., Hepbasli A., Utlu Z.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.28, sa.8, ss.715-725, 2006 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

31. Pre-stressed adhesive strap joints for thick composite sandwich structures

Canyurt O. E., Zhang J.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.48, sa.4, ss.389-399, 2006 (SCI-Expanded, Scopus) identifier identifier

32. Estimation of welded joint strength using genetic algorithm approach

Canyurt C.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.47, sa.8, ss.1249-1261, 2005 (SCI-Expanded, Scopus) identifier identifier

33. Electricity estimation using genetic algorithm approach: a case study of Turkey

Ozturk H., Ceylan H., Canyurt O. E., Hepbasli A.
ENERGY , cilt.30, sa.7, ss.1003-1012, 2005 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

34. Estimating the Turkish residential-commercial energy output based on genetic algorithm (GA) approaches

Canyurt O. E., Ozturk H., Hepbasli A., Utlu Z.
ENERGY POLICY , cilt.33, sa.8, ss.1011-1019, 2005 (SCI-Expanded, SSCI, Scopus) Sürdürülebilir Kalkınma identifier identifier

35. A cellular framework for structural analysis and optimization

Canyurt O. E., Hajela P.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING , cilt.194, ss.3516-3534, 2005 (SCI-Expanded, Scopus) identifier identifier

36. Energy demand estimation based on two-different genetic algorithm approaches

Canyurt O. E., Ceylan H., Ozturk H., Hepbasli A.
ENERGY SOURCES , cilt.26, sa.14, ss.1313-1320, 2004 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

37. Three different genetic algorithm approaches to the estimation of residential exergy input/output values

Ozturk H., Canyurt O. E., Hepbasli A., Utlu Z.
BUILDING AND ENVIRONMENT , cilt.39, sa.7, ss.807-816, 2004 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

38. Fatigue strength estimation of adhesively bonded tubular joint using genetic algorithm approach

Canyurt C.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.46, sa.3, ss.359-370, 2004 (SCI-Expanded, Scopus) identifier identifier

39. Residential-commercial energy input estimation based on genetic algorithm (GA) approaches: an application of Turkey

Ozturk H., Canyurt O. E., Hepbasli A., Utlu Z.
ENERGY AND BUILDINGS , cilt.36, sa.2, ss.175-183, 2004 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

40. Adhesive tongue-and-groove joints for thick composite laminates

Dvorak G., Zhang J., Canyurt O. E.
COMPOSITES SCIENCE AND TECHNOLOGY , cilt.61, sa.8, ss.1123-1142, 2001 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 10

1. STRUCTURAL ANALYSIS AND EXPERIMENTAL VALIDATION USING A DUMMY MODEL OF EQUIPMENT DESIGNED FOR THE SPACE ENVIRONMENT

Alat C., Canyurt O. E.
8th INTERNATIONAL CONFERENCE ON HEALTH, ENGINEERING AND APPLIED SCIENCES, Sarajevo, Bosna-Hersek, 24 - 26 Ekim 2025, ss.127-142, (Tam Metin Bildiri)

2. TOPOLOJİ OPTİMİZASYONU VE EKLEMELİ İMALAT YÖNTEMLERİYLE YENİDEN TASARLANAN GÜDÜMLÜ FÜZE PARÇASININ TİTREŞİM PERFORMANSININ ANALİTİK VE DENEYSEL OLARAK İNCELENMESİ

Taşar B., Canyurt O. E.
7th INTERNATIONAL CONGRESS ON ENGINEERING AND SCIENCES, İstanbul, Türkiye, 27 - 28 Eylül 2025, ss.66-73, (Tam Metin Bildiri)

3. ÖKSETİK DAVRANIŞI VE BCC SERTLİĞİNİ ENTEGRE EDEN ÇOK İŞLEVLİ HİBRİT KAFES YAPISININ İNCELENMESİ

Balta Y., Canyurt O. E.
7th INTERNATIONAL CONGRESS ON ENGINEERING AND SCIENCES, İstanbul, Türkiye, 27 - 28 Eylül 2025, ss.509-518, (Tam Metin Bildiri)

4. HAVA ARACI YAPISAL PARÇASININ TOPOLOJİ OPTİMİZASYONU KULLANILARAK EKLEMELİ İMALATA UYGUN TASARIMI VE SAYISAL ANALİZLERLE DOĞRULANMASI

Kızılboğa E., Canyurt O. E.
7th INTERNATIONAL CONGRESS ON ENGINEERING SCIENCES AND MULTIDISCIPLINARY APPROACHES, İstanbul, Türkiye, 25 - 26 Mayıs 2024, ss.166-174, (Tam Metin Bildiri)

5. Numerical Modelling Of Heat Distribution In Powder Bed Fusion Process

Eren O., Sezer H. K., Canyurt O. E.
6th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Bucuresti, Romanya, 23 - 25 Kasım 2022, ss.10-11, (Özet Bildiri)

6. Numerical Modelling Of Heat Distribution In Powder Bed Fusion Process

EREN O., SEZER H. K., CANYURT O. E.
6th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Bükreş, Romanya, 22 Kasım 2022, ss.23, (Özet Bildiri)

7. Dil Oluk Tekniği ile Birleştirilen Tabakalı Kumaş 0 90 Cam Elyaf Kompozit Malzemelerin Yorulma Dayanımı

CANYURT O. E.
16th International Materials Symposium (IMSP), Denizli, Türkiye, 12 - 14 Ekim 2016, ss.546-552, (Tam Metin Bildiri)

8. Failure Behaviour of A SiCf SiC Composite Tube Under Biaxial Loading

CANYURT O. E.
16th International Materials Symposium, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.744-748, (Tam Metin Bildiri)

9. FATIGUE STRENGTH OF GLASS COMPOSITE WOVEN 0 90 MATERIALS JOINED BY TONGUE AND GROOVE TECHNIQUE

CANYURT O. E.
16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

10. Application of genetic algorithm (GA) technique on demand estimation of fossil fuels in Turkey

Canyurt O. E., Ozturk H. K.
ASME Energy Sustainability Conference, California, Amerika Birleşik Devletleri, 27 - 30 Haziran 2007, ss.193-201, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier
Kitaplar 1

1. Perspective Chapter: Design Considerations for Additive Manufacturing

EREN O., SEZER H. K., CANYURT O. E.
Product Design - A Manufacturing Perspective, YASA EVREN, POYRAZ ÖZGÜR, Editör, IntechOpen, ss.1-20, 2024
Metrikler

Yayın

55

Yayın (WoS)

39

Yayın (Scopus)

39

Atıf (WoS)

816

H-İndeks (WoS)

15

Atıf (Scopus)

896

H-İndeks (Scopus)

17

Atıf (Scholar)

228

H-İndeks (Scholar)

2

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

2

Proje

14

Tez Danışmanlığı

10

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları