Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of the effect of compression ratio on performance of a beta type Stirling engine with rhombic mechanism by CFD analysis

Arslan T. A., SOLMAZ H., İPCİ D., Aksoy F.
Environmental Progress and Sustainable Energy , cilt.42, sa.4, 2023 (SCI-Expanded) identifier identifier

Investigation of the effect of carbon nanotube addition to diesel-biodiesel blend on engine performance and exhaust emissions

Solmaz H., Sürer E., Yılmaz E., Calam A., İpci D.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.38, sa.2, ss.1055-1064, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

Modeling and validation of crankshaft speed fluctuations of a single-cylinder four-stroke diesel engine

Babagiray M., Solmaz H., İpci D., Aksoy F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.236, sa.4, ss.553-568, 2022 (SCI-Expanded) identifier identifier

Investigation of the effects of intake manifold pressure on performance and combustion characteristics in an HCCI engine

SOLMAZ H., CALAM A., Halis S., İPCİ D., Yilmaz E.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.37, sa.4, ss.1735-1749, 2022 (SCI-Expanded) identifier identifier identifier

Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method

Solmaz H., Ardebili S. M. S., Calam A., Yılmaz E., İpci D.
Energy , cilt.227, 2021 (SCI-Expanded) identifier identifier

Effect of nitrogen and hydrogen addition on performance and emissions in reactivity controlled compression ignition

Bahrami S., Poorghasemi K., SOLMAZ H., CALAM A., İPCİ D.
Fuel , cilt.292, 2021 (SCI-Expanded) identifier identifier

Modelling of performance, emission, and combustion of an HCCI engine fueled with fusel oil-diethylether fuel blends as a renewable fuel

Safieddin Ardebili S. M., SOLMAZ H., CALAM A., İPCİ D.
Fuel , cilt.290, 2021 (SCI-Expanded) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

Effects of the regenerator on engine performance of a rhombic drive beta type stirling engine

AKSOY F., SOLMAZ H., ARSLAN M., Yilmaz E., İPCİ D., CALAM A.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , 2021 (SCI-Expanded) identifier identifier

Thermodynamic analysis of a gamma-type stirling engine driven by Scotch Yoke mechanism

İpci D.
INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.18, sa.2, ss.144-155, 2021 (SCI-Expanded) identifier identifier

A review on higher alcohol of fusel oil as a renewable fuel for internal combustion engines: Applications, challenges, and global potential

Ardebili S. M. S., SOLMAZ H., İPCİ D., CALAM A., Mostafaei M.
FUEL , cilt.279, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Experimental investigation on the combustion, performance and exhaust emission characteristics of poppy oil biodiesel-diesel dual fuel combustion in a CI engine

Uyumaz A., Aydoğan B., Yilmaz E., Solmaz H., Aksoy F., Mutlu İ., et al.
FUEL , cilt.280, 2020 (SCI-Expanded) identifier identifier

Performance Enhancement of a Beta Type Rhombic Drive Stirling engine

ÇINAR C., SOLMAZ H., İPCİ D., Yilmaz E., AKSOY F.
INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.17, sa.13, ss.884-893, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Thermodynamic-dynamic analysis of gamma type free-piston stirling engine charged with hydrogen gas as working fluid

İPCİ D.
INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.17, sa.12, ss.805-815, 2020 (SCI-Expanded) identifier identifier

CONTROL OF COMBUSTION PHASE WITH DIRECT INJECTION TIMING FOR DIFFERENT INLET TEMPERATURES IN AN RCCI ENGINE

SOLMAZ H., İPCİ D.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.40, sa.2, ss.267-279, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Thermodynamic and dynamic analysis of an alpha type Stirling engine and numerical treatment

İPCİ D., KARABULUT H.
ENERGY CONVERSION AND MANAGEMENT , cilt.169, ss.34-44, 2018 (SCI-Expanded) identifier identifier

Thermodynamic and dynamic analysis of an alpha type Stirling engine with Scotch Yoke mechanism

ALTIN M., OKUR M., İPCİ D., HALİS S., KARABULUT H.
ENERGY , cilt.148, ss.855-865, 2018 (SCI-Expanded) identifier identifier

A coupled thermodynamic and dynamic model of a three cylinder diesel engine: A novel approach for gas exchange process

KARABULUT H., SOLMAZ H., İPCİ D.
APPLIED THERMAL ENGINEERING , cilt.121, ss.750-760, 2017 (SCI-Expanded) identifier identifier

Numerical solution of fully developed heat transfer problem with constant wall temperature and application to isosceles triangle and parabolic ducts

KARABULUT H., İPCİ D., ÇINAR C.
APPLIED THERMAL ENGINEERING , cilt.102, ss.115-124, 2016 (SCI-Expanded) identifier identifier

Thermodynamic and dynamic modeling of a single cylinder four stroke diesel engine

İPCİ D., KARABULUT H.
APPLIED MATHEMATICAL MODELLING , cilt.40, ss.3925-3937, 2016 (SCI-Expanded) identifier identifier

THE INVESTIGATION OF FULLY DEVELOPED FLOW AND HEAT TRANSFER IN RADIATOR AIR CHANNELS

İPCİ D., KARABULUT H., Cinar V. C.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.36, sa.2, ss.119-133, 2016 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Free Vibration Analysis of a Functionally Graded Micro-Beam with Tapered Cross Section

İpci D., Yıldırım B.
Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , cilt.9, sa.2, ss.272-282, 2021 (Hakemli Dergi)

Investigation on hydrodynamic characteristics of a Stirling regenerator matrix using porous media approach: a CFD study

İpci D.
International Journal of Automotive Engineering and Technologies , cilt.9, sa.4, ss.171-177, 2020 (Hakemli Dergi) Creative Commons License

A Comparative CFD Study of Side-view Mirror and Side-view Camera Usages on a City Bus

İPCİ D.
International Journal of Automotive Science And Technology , cilt.4, sa.3, ss.138-143, 2020 (Hakemli Dergi)

Torsional vibration moment analysis of a three cylinder internal combustion engine

KARABULUT H., İPCİ D.
International Journal of Vehicle Noise and Vibration , cilt.14, sa.2, ss.147-170, 2018 (Scopus)

Dynamic and Thermodynamic Examination of a Two-Stroke Internal Combustion Engine

İPCİ D., KARABULUT H.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.19, sa.2, ss.141-154, 2016 (ESCI) identifier

Doğalgaz Yakıtlı HCCI Bir Motorda Hidrojen İlavesinin Yanma Karakteristikleri Üzerindeki Etkilerinin Nümerik Olarak İncelenmesi

Polat S., Uyumaz A., İpci D., Yücesu H. S., Solmaz H., Yılmaz E.
Makine Teknolojileri Elektronik Dergisi (elektronik) , cilt.12, sa.2, ss.15-26, 2015 (Hakemli Dergi)

The Effects of iso propanol and n heptane Fuel Blends on HCCI Combustion Characteristics and Engine Performance

İpci D., Yılmaz E., Aksoy F., Uyumaz A., Polat S., Solmaz H.
Makine Teknolojileri Elektronik Dergisi (elektronik) , cilt.12, sa.1, ss.49-56, 2015 (Hakemli Dergi)

BİR KARA TAŞIT MODELİ ETRAFINDAKİ AKIŞ YAPISININ SAYISAL OLARAK İNCELENMESİ

İPCİ D., YILMAZ E., AYSAL F. E., SOLMAZ H.
Makine Teknolojileri Elektronik Dergisi , cilt.12, sa.2, ss.51-64, 2015 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Farklı Atak Açılarında NACA 0012 Kanat Profili Üzerindeki Buzlanmanın İncelenmesi

Oğuzata A., İpci D.
3rd International Symposium on Automotive Science and Technology (ISASTECH23), Ankara, Türkiye, 7 - 08 Eylül 2023, ss.1-6 Creative Commons License

Hafif Elektrikli Araçlar için Kompakt Motor Ünitesi Tasarımı ve Performans Analizi: CEYRAN Markalı Aracın Verileri Üzerinden Bir İnceleme

Polat A. Ö., Erden B. Ç., İpci D.
3rd International Symposium on Automotive Science and Technology (ISASTECH23), Ankara, Türkiye, 7 - 08 Eylül 2023, ss.1-5

Şehir İçi Otobüslerde Farklı Tavan Profillerinin Sürüklenme Katsayısına Etkisinin İncelenmesi

Aydın S. G., Yıldırım M. R., İpci D.
The 2nd International Symposium on Automotive Science and Technology (ISASTECH 2021), Ankara, Türkiye, 8 - 10 Eylül 2021, ss.1-8 Creative Commons License

Rhombic Mekanizmalı Beta Tipi Bir Stirling Motorunun Adyabatik Şartlarda CFD Analizi

Arslan T. A., Solmaz H., İpci D.
The 2nd International Symposium on Automotive Science and Technology (ISASTECH 2021), Ankara, Türkiye, 8 - 10 Eylül 2021, ss.1-8

Krank ve Scotch Yoke mekanizmalarıyla tahrik edilen Gama tipi bir Stirling motorunun termodinamik performansının karşılaştırılması

İpci D.
International Congress of Academic Research, 7 - 09 Aralık 2020, ss.402-411 Creative Commons License

Tek Silindirli Bir Dizel Motorunun Krank Mili Hız Dalgalanmalarının İncelenmesi

ÇETİN O., İPCİ D., SOLMAZ H.
The 1st International Symposium on Automotive Science and Technology (ISASTECH 2019), Ankara, Türkiye, 5 - 06 Eylül 2019, ss.456-468

Tek Silindirli Dört Zamanlı Buji ile Ateşlemeli Rhombic Hareket İletim Mekanizmalı bir İçten Yanmalı Motorun Tasarımı ve Analizi

SOLMAZ H., YILMAZ E., POLAT S., İPCİ D., VEZNEDAR F., OGUZ H., et al.
9th International Automotive Technologies Congress, OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1796-1806

Üçgen Kesitli Radyatör Hava KanallarInda IsI Transferinin Nümerik Olarak İncelenmesi

İPCİ D., KARABULUT H.
9th International Automotive Technologies Congress, OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1321-1327

Fuzel Yağının Buji ile Ateşlemeli bir Motorda Yanma Karakteristiklerinin ve Emisyonlarinin İncelenmesi

NACAK Ç., CALAM A., İPCİ D., YÜCESU H. S., HALİS S., SOLMAZ H.
14th International Combustion Symposium (INCOS2018), Karabük, Türkiye, 25 - 27 Nisan 2018, ss.585-590

İndirgenmiş kimyasal kinetik mekanizma modeli kullanılarak HCCI motorda yanma başlangıcının belirlemesi

İPCİ D.
1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016

Metrikler

Yayın

44

Atıf (WoS)

434

H-İndeks (WoS)

11

Atıf (Scopus)

511

H-İndeks (Scopus)

11

Atıf (Scholar)

640

H-İndeks (Scholar)

13

Atıf (TrDizin)

6

H-İndeks (TrDizin)

1

Proje

3

Tez Danışmanlığı

1

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları