Prof. ELMAS SALAMCİ

Articles 37

1. Buckling and Charpy Impact Behaviors of Hybrid Composites with Various Splice Designs

Kahraman İ. Y., SALAMCİ E., Tüzemen M. Ç.

Mechanics of Composite Materials , vol.62, no.1, pp.82-94, 2026 (SCI-Expanded, Scopus)

2. Additive manufacturing of lattice structures with hybrid unit cell: A study on manufacturability and strength

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.240, no.5, pp.1467-1477, 2026 (SCI-Expanded, Scopus)

3. Toward novel AM feedstocks: Ultrasonically atomized 7075 and Al–Zn–Mg–Cu–Co–Cr–Mo powders

Kvvssn V., Laieghi H., Butt M. M., Ansari P., SALAMCI M. U., SALAMCİ E., et al.

Powder Technology , vol.470, 2026 (SCI-Expanded, Scopus)

4. Innovative Surface Treatment Techniques for Carbon Fiber-Based Polymer Matrix Composites

Iris M. E., Tanoglu M., SALAMCİ E., Dehneliler S., Iplikci H., Esenoglu G.

Solids , vol.7, no.1, 2026 (ESCI, Scopus)

5. Enhanced strength and ductility in an additively manufactured Al10SiMg alloy at cryogenic temperatures

Naeem M., Rehman A. U., Romero Resendiz L., Salamci E., Aydin H., Ansari P., et al.

Communications Materials , vol.6, no.1, 2025 (ESCI, Scopus)

6. Recent progress in additive manufacturing of 7XXX aluminum alloys

Kvvssn V., Butt M. M., Laieghi H., Uddin Z., SALAMCİ E., Kim D. B., et al.

International Journal of Advanced Manufacturing Technology , vol.137, no.9, pp.4353-4399, 2025 (SCI-Expanded, Scopus)

7. Effect of cure parameters on void content and mechanical properties of composite laminates

Esmer Ö., Salamcl E., Tzemen M. Ç.

EMERGING MATERIALS RESEARCH , vol.14, no.1, pp.3-11, 2025 (SCI-Expanded) Sustainable Development

8. Corrosion in laser powder bed fusion AlSi10Mg alloy

Laieghi H., Kvvssn V., Butt M. M., Ansari P., SALAMCI M. U., Patterson A. E., et al.

Engineering Reports , vol.6, no.10, 2024 (ESCI, Scopus)

9. Additive manufacturing design approach to strut-based functionally graded porous structures for personalized implants

Tüzemen M. Ç., Salamcı E., Ünal R.

JOURNAL OF MANUFACTURING PROCESSES , vol.84, pp.1526-1540, 2022 (SCI-Expanded, Scopus)

10. An experimental analysis of three different corrosion behaviors, passivation, pitting and uniform, of electrodeposited Chromium-Nano diamond composite coating on porous materials

Zoghipour N., Valov R., Petkov V., Salamcı E., Ünal R.

Makina Tasarım ve Imalat Dergisi , vol.20, no.2, pp.79-85, 2022 (TRDizin)

11. Investigation of Passivation, Pitting and Uniform Corrosion Performances of Chromium Coatings Reinforced with Nano Diamond Particles on Porous Powder Metallurgy Specimens

Zoghipour N., SALAMCİ E., ÜNAL R., Valov R., Petkov V.

Protection of Metals and Physical Chemistry of Surfaces , vol.58, no.5, pp.1011-1017, 2022 (SCI-Expanded, Scopus)

12. Investigation of Compatibility Between Design and Additively Manufactured Parts of Functionally Graded Porous Structures

Dursun A. M., Tüzemen M. Ç., Salamci E., Yılmaz O., Ünal R.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.25, no.3, pp.1069-1082, 2022 (ESCI, TRDizin)

13. Investigation of the relationship between flexural modulus of elasticity and functionally graded porous structures manufactured by AM

TÜZEMEN M. Ç., SALAMCİ E., ÜNAL R.

Materials Today Communications , vol.31, 2022 (SCI-Expanded, Scopus)

14. Investigation of Wear Behaviors of Nanodiamond Particles Added Chromium Coating on Porous Powder Metallurgy Specimens

Zoghipour N., SALAMCİ E., ÜNAL R., Valov R., Petkov V.

Protection of Metals and Physical Chemistry of Surfaces , vol.58, pp.42-52, 2022 (SCI-Expanded, Scopus)

15. Investigation of Tensile Properties of Glass Fiber/Epoxy Nanocomposites Laminates Enhanced with Graphene Nanoparticles

Tüzemen M. Ç., Khakzad F., Salamci E.

FIBERS AND POLYMERS , vol.22, no.5, pp.1441-1448, 2021 (SCI-Expanded, Scopus)

16. Uçak - Yıldırım Etkileşimi

KİÇECİ E. C., SALAMCİ E.

European Journal of Science and Technology , pp.177-187, 2020 (TRDizin)

17. The effects on the flexural strength and impact behavior of nanographene ratio of the glass fiber nanocomposite plates

Khakzad F., TÜZEMEN M. Ç., SALAMCİ E., Anil Ö.

Polymer Engineering and Science , vol.59, no.10, pp.2082-2091, 2019 (SCI-Expanded, Scopus)

18. Electrolyte Coatings od Chromium With Nano-diamonds on Sintered Steels

Gıdıkova N., Valov R., Petkov V., Salamci E., Bilgili Z., Ünal R.

Transactions o Foundry Research Institute , vol.57, no.4, pp.333-336, 2017 (Peer-Reviewed Journal)

19. Enhancing mechanical properties of bolted carbon/epoxy nanocomposites with carbon nanotube, nanoclay, and hybrid loading

TÜZEMEN M. Ç., SALAMCİ E., AVCI A.

COMPOSITES PART B-ENGINEERING , vol.128, pp.146-154, 2017 (SCI-Expanded, Scopus)

20. Effect of Nanodiamonds Modification of Chromium Coating on Sintered Ferrous Materials

Gıdıkova N., Salamci E., Petkov V., Valov R., Ünal R.

Journal of Materials Science and Technology , vol.25, no.2, pp.80-85, 2017 (SCI-Expanded, Scopus)

21. Effect of Nano-Diamond Modification of Chromium Coating on Sintered Ferrous Materials

Gıdıkova N., Salamci E., Valov R., Petkov V., Ünal R.

Journal of Materials Science and Technology , vol.25, no.2, pp.80-85, 2017 (SCI-Expanded, Scopus)

22. Effect of microstructure on high cycle fatigue behavior of high martensitic dual phase steels

Saatci T., SALAMCİ E.

MATERIALS TESTING , vol.59, no.4, pp.315-322, 2017 (SCI-Expanded, Scopus)

23. Effect of microstructure on corrosion behavior of dual-phase steels

Salamci E., Candan S., Kabakci F.

KOVOVE MATERIALY-METALLIC MATERIALS , vol.55, no.2, pp.133-139, 2017 (SCI-Expanded, Scopus)

24. Karbon Fiber/Epoksi Nanokompozit Plakalarda Nanopartikül Katkısının Fiber Matris ve Boşluk Hacim Oranlarına Etkisi

TÜZEMEN M. Ç., SALAMCİ E., AVCI A.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C:Tasarım ve Teknoloji , vol.5, no.1, pp.11-19, 2017 (TRDizin)

25. The effect of microstructure on tensile strength of high martensite dual-phase steels

Saatci T., Salamci E.

KOVOVE MATERIALY-METALLIC MATERIALS , vol.55, no.5, pp.333-342, 2017 (SCI-Expanded, Scopus)

26. DistaloyAB Tozundan Üretilmiş ve Elmas Nanoparçacık Katkılı Krom Kaplanmış Toz Metal Malzemelerin Korozyon Davranışlarının Araştırılması

Emine Zeynep B., Salamci E., Asan A.

Politeknik Dergisi , vol.20, no.1, pp.223-230, 2017 (TRDizin)

27. Investigation of corrosion behaviour of porous powder metallurgy parts electrochemically coated with diamond nano particles modified chromium

Bilgili E. Z., SALAMCİ E., ASAN A., ÜNAL R., Valov R.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.31, no.3, pp.580-589, 2016 (SCI-Expanded, Scopus, TRDizin)

28. Design and Analysis of Lightweight Automotive Component for Turbocharger Units

TÜZEMEN M. Ç., AĞAOĞLU M., KARAKAYA M., SALAMCİ E., KÜÇÜKTÜRK G.

Manufacturing Science and Technology , vol.3, no.5, pp.278-285, 2015 (Peer-Reviewed Journal)

29. ÇİFT FAZLI ÇELİĞİN ÇEKME ÖZELLİKLERİNE MİKROYAPININ ETKİSİ

Salamci E.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.26, no.2, pp.263-272, 2011 (SCI-Expanded, Scopus)

30. Manufacturing of Spex Type Mechanical Alloying Machine and Product f Aluminium Based Composite Powders

SALAMCİ E.

Technology (Teknoloji) , vol.12, no.1, pp.69-77, 2009 (Peer-Reviewed Journal)

31. Calorimetric and transmission electron microscopy studies of spray deposited Al-Zn-Mg-Cualloys

Salamci E.

MATERIALS SCIENCE AND TECHNOLOGY , vol.20, no.7, pp.859-863, 2004 (SCI-Expanded, Scopus)

32. Spray Casting (Sprey Döküm)

SALAMCİ E.

G.U. Journal of Science (G.Ü. Fen Bilimleri Dergisi) , vol.17, no.2, pp.153-171, 2004 (TRDizin)

33. Microstructure and mechanical properties of spray deposited and extruded 7000 series aluminium alloys

Salamci E., Cochrane R.

MATERIALS SCIENCE AND TECHNOLOGY , vol.19, no.8, pp.1130-1136, 2003 (SCI-Expanded, Scopus)

34. Directonality in the Mechanical Properties of Spray Cast and Extruded 7xxx Series Aluminum Alloys

SALAMCİ E.

Turkish Journal of Engineering and Enviromental Science , vol.27, no.3, pp.169-176, 2003 (TRDizin)

35. Investigation of secondary phase particles in spray deposited 7000 series aluminium alloys

Salamci E., Cochrane R.

MATERIALS SCIENCE AND TECHNOLOGY , vol.18, no.12, pp.1445-1452, 2002 (SCI-Expanded, Scopus)

36. Mechanical Properties of Spray Cast 7xxx Series Alıminium Alloys

SALAMCİ E.

Turkish Journal of Engineering and Enviromental Science , vol.26, no.4, pp.345-352, 2002 (TRDizin)

37. Ageing Behaviour of Spray Cast Al Zn Cu Mg Alloys

SALAMCİ E.

Turkish Journal of Engineering and Enviromental Science , vol.25, no.6, pp.681-686, 2001 (Scopus, TRDizin)

Papers Presented at Peer-Reviewed Scientific Conferences 17

1. INVESTIGATION OF ADDITIVE MANUFACTURING OF LATTICE STRUCTURES WITH HYBRID UNIT CELL

Kıratlı H., Salamci E.

2.International Congress on Innovation Technologies & Engineering, İzmir, Turkey, 12 - 13 June 2023, pp.271-280, (Full Text)

2. SANDVİÇ YAPILARDA KENAR INSERT BAĞLAYICILARINA GRUP ETKİSİNİN İNCELENMESİ

Abay M. M., ÇEKİÇ A., SALAMCİ E., Akçe H.

9. ULUSAL HAVACILIK VE UZAY KONFERANSI, İzmir, Turkey, 14 September 2022, (Full Text)

3. Composite Rocket Fin Optimization Based On Flutter Analysis

Gözüm S., Örün A. E., Salamci E.

10th Ankara International Aerospace Conference, Ankara, Turkey, 18 - 20 September 2019, (Full Text)

4. Review of parameters affecting the bonding quality of composite joins

İris M. E., Salamci E.

4th International Porous and Powder Materials Symposium and Exhibition PPM 2019, Ankara, Turkey, 9 - 11 September 2019, pp.122-127, (Full Text)

5. Comparison of radome sandwich composite structures with finite element method

ÖZDEMİR B., SALAMCİ E., KULOĞLU M.

ICCST/12 12th International Conference on Composite Science and Technology, Sorrento, Italy, 8 - 10 May 2019, (Full Text)

6. Analysis and Manufacturing of Wooden Core and Glass Fiber/Epoxy Face Sheets Sandwich Composite Electric Skateboard

YILDIZ B., PALABIYIK G. C., TÜZEMEN M. Ç., SALAMCİ E.

4th International Conference on Engineering and Natural Science, 2 - 06 May 2018, (Summary Text)

7. Hücresel yapılı tasarımlarda boşluk değerinin belirlenmesine yönelik matematiksel yaklaşım

Dursun A. M., Ünal R., Yılmaz O., Salamci E.

3rd International Congress on 3D printing (Additional Manufacturing) Technologies and Digital Industries, Antalya, Turkey, 19 - 21 April 2018, pp.660-668, (Full Text)

8. Fırlatma Mekanizmasına Sahip Kompozit İnsansız Hava Aracı Tasarımı ve Üretimi

Gerçeker H., Konuk D., Keskin Y. E., Ercan K., Akay M., TÜZEMEN M. Ç., et al.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 April 2018, (Summary Text)

9. Hücresel Yapılı Tasarımlarda Hacimsel Boşluk Değerinin Belirlenmesine Yönelik Matematiksel Yaklaşım

Dursun A. M., ÜNAL R., YILMAZ O., Salamcı E.

3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018, (Full Text)