Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

Iris M. E., SALAMCİ E.
MECHANICS OF COMPOSITE MATERIALS , 2024 (SCI-Expanded) identifier identifier

Mechanical and Electrochemical Properties Comparison of Additively Manufactured Ti-6Al-4V Alloys by Electron Beam Melting and Selective Laser Melting

Romero Reséndiz L., Sánchez Cano T., Naeem M., Ur Rehman A., SALAMCİ E., Torres Mendoza V., et al.
Journal of Materials Engineering and Performance , cilt.33, sa.17, ss.9028-9038, 2024 (SCI-Expanded) Creative Commons License identifier

Investigation of Reinforcement Around the Lightening Hole in Composite Plates Under Tension and Shear Loads

Orun A. E., SALAMCİ E., ÇÖKER D.
MECHANICS OF COMPOSITE MATERIALS , cilt.60, ss.183-198, 2024 (SCI-Expanded) identifier identifier

Additive manufacturing design approach to strut-based functionally graded porous structures for personalized implants

Tüzemen M. Ç., Salamcı E., Ünal R.
JOURNAL OF MANUFACTURING PROCESSES , cilt.84, ss.1526-1540, 2022 (SCI-Expanded) identifier identifier

Investigation of Passivation, Pitting and Uniform Corrosion Performances of Chromium Coatings Reinforced with Nano Diamond Particles on Porous Powder Metallurgy Specimens

Zoghipour N., SALAMCİ E., ÜNAL R., Valov R., Petkov V.
Protection of Metals and Physical Chemistry of Surfaces , cilt.58, sa.5, ss.1011-1017, 2022 (SCI-Expanded) identifier identifier

Investigation of the relationship between flexural modulus of elasticity and functionally graded porous structures manufactured by AM

TÜZEMEN M. Ç., SALAMCİ E., ÜNAL R.
Materials Today Communications , cilt.31, 2022 (SCI-Expanded) identifier identifier

Investigation of Wear Behaviors of Nanodiamond Particles Added Chromium Coating on Porous Powder Metallurgy Specimens

Zoghipour N., SALAMCİ E., ÜNAL R., Valov R., Petkov V.
Protection of Metals and Physical Chemistry of Surfaces , cilt.58, ss.42-52, 2022 (SCI-Expanded) identifier identifier

Investigation of Tensile Properties of Glass Fiber/Epoxy Nanocomposites Laminates Enhanced with Graphene Nanoparticles

Tüzemen M. Ç., Khakzad F., Salamci E.
FIBERS AND POLYMERS , cilt.22, sa.5, ss.1441-1448, 2021 (SCI-Expanded) identifier identifier

The effects on the flexural strength and impact behavior of nanographene ratio of the glass fiber nanocomposite plates

Khakzad F., TÜZEMEN M. Ç., SALAMCİ E., Anil Ö.
Polymer Engineering and Science , cilt.59, sa.10, ss.2082-2091, 2019 (SCI-Expanded) identifier identifier

Enhancing mechanical properties of bolted carbon/epoxy nanocomposites with carbon nanotube, nanoclay, and hybrid loading

TÜZEMEN M. Ç., SALAMCİ E., AVCI A.
COMPOSITES PART B-ENGINEERING , cilt.128, ss.146-154, 2017 (SCI-Expanded) identifier identifier

Effect of Nanodiamonds Modification of Chromium Coating on Sintered Ferrous Materials

Gıdıkova N., Salamci E., Petkov V., Valov R., Ünal R.
Journal of Materials Science and Technology , cilt.25, sa.2, ss.80-85, 2017 (SCI-Expanded)

Effect of Nano-Diamond Modification of Chromium Coating on Sintered Ferrous Materials

Gıdıkova N., Salamci E., Valov R., Petkov V., Ünal R.
Journal of Materials Science and Technology , cilt.25, sa.2, ss.80-85, 2017 (SCI-Expanded)

Effect of microstructure on high cycle fatigue behavior of high martensitic dual phase steels

Saatci T., SALAMCİ E.
MATERIALS TESTING , cilt.59, sa.4, ss.315-322, 2017 (SCI-Expanded) identifier identifier

The effect of microstructure on tensile strength of high martensite dual-phase steels

Saatci T., Salamci E.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.5, ss.333-342, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Effect of microstructure on corrosion behavior of dual-phase steels

Salamci E., Candan S., Kabakci F.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.2, ss.133-139, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Investigation of corrosion behaviour of porous powder metallurgy parts electrochemically coated with diamond nano particles modified chromium

Bilgili E. Z., SALAMCİ E., ASAN A., ÜNAL R., Valov R.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.3, ss.580-589, 2016 (SCI-Expanded) Creative Commons License identifier identifier

ÇİFT FAZLI ÇELİĞİN ÇEKME ÖZELLİKLERİNE MİKROYAPININ ETKİSİ

Salamci E.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.2, ss.263-272, 2011 (SCI-Expanded)

Calorimetric and transmission electron microscopy studies of spray deposited Al-Zn-Mg-Cualloys

Salamci E.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.20, sa.7, ss.859-863, 2004 (SCI-Expanded) identifier identifier

Microstructure and mechanical properties of spray deposited and extruded 7000 series aluminium alloys

Salamci E., Cochrane R.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.19, sa.8, ss.1130-1136, 2003 (SCI-Expanded) identifier identifier

Investigation of secondary phase particles in spray deposited 7000 series aluminium alloys

Salamci E., Cochrane R.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.18, sa.12, ss.1445-1452, 2002 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Corrosion in laser powder bed fusion AlSi10Mg alloy

Laieghi H., Kvvssn V., Butt M. M., Ansari P., SALAMCI M. U., Patterson A. E., et al.
Engineering Reports , cilt.6, sa.10, 2024 (ESCI) identifier

Kompozit Plakalara Açılan Hafifletme Deliği Etrafındaki Güçlendirmenin Eğme Yüklemesi Altında İncelenmesi

Örün A. E., SALAMCİ E.
Avrupa Bilim ve Teknoloji Dergisi , sa.51, ss.86-96, 2023 (Hakemli Dergi)

An experimental analysis of three different corrosion behaviors, passivation, pitting and uniform, of electrodeposited Chromium-Nano diamond composite coating on porous materials

Zoghipour N., Valov R., Petkov V., Salamcı E., Ünal R.
Makina Tasarım ve Imalat Dergisi , cilt.20, sa.2, ss.79-85, 2022 (Hakemli Dergi) identifier

Investigation of Compatibility Between Design and Additively Manufactured Parts of Functionally Graded Porous Structures

Dursun A. M., Tüzemen M. Ç., Salamci E., Yılmaz O., Ünal R.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.25, sa.3, ss.1069-1082, 2022 (ESCI) identifier

Uçak - Yıldırım Etkileşimi

KİÇECİ E. C., SALAMCİ E.
European Journal of Science and Technology , ss.177-187, 2020 (Hakemli Dergi)

Electrolyte Coatings od Chromium With Nano-diamonds on Sintered Steels

Gıdıkova N., Valov R., Petkov V., Salamci E., Bilgili Z., Ünal R.
Transactions o Foundry Research Institute , cilt.57, sa.4, ss.333-336, 2017 (Hakemli Dergi)

DistaloyAB Tozundan Üretilmiş ve Elmas Nanoparçacık Katkılı Krom Kaplanmış Toz Metal Malzemelerin Korozyon Davranışlarının Araştırılması

Emine Zeynep B., Salamci E., Asan A.
Politeknik Dergisi , cilt.20, sa.1, ss.223-230, 2017 (Hakemli Dergi)

Karbon Fiber/Epoksi Nanokompozit Plakalarda Nanopartikül Katkısının Fiber Matris ve Boşluk Hacim Oranlarına Etkisi

TÜZEMEN M. Ç., SALAMCİ E., AVCI A.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C:Tasarım ve Teknoloji , cilt.5, sa.1, ss.11-19, 2017 (Hakemli Dergi)

Design and Analysis of Lightweight Automotive Component for Turbocharger Units

TÜZEMEN M. Ç., AĞAOĞLU M., KARAKAYA M., SALAMCİ E., KÜÇÜKTÜRK G.
Manufacturing Science and Technology , cilt.3, sa.5, ss.278-285, 2015 (Hakemli Dergi) Creative Commons License

Manufacturing of Spex Type Mechanical Alloying Machine and Product f Aluminium Based Composite Powders

SALAMCİ E.
Technology (Teknoloji) , cilt.12, sa.1, ss.69-77, 2009 (Hakemli Dergi)

Spray Casting (Sprey Döküm)

SALAMCİ E.
G.U. Journal of Science (G.Ü. Fen Bilimleri Dergisi) , cilt.17, sa.2, ss.153-171, 2004 (Hakemli Dergi)

Directonality in the Mechanical Properties of Spray Cast and Extruded 7xxx Series Aluminum Alloys

SALAMCİ E.
Turkish Journal of Engineering and Enviromental Science , cilt.27, sa.3, ss.169-176, 2003 (Hakemli Dergi)

Mechanical Properties of Spray Cast 7xxx Series Alıminium Alloys

SALAMCİ E.
Turkish Journal of Engineering and Enviromental Science , cilt.26, sa.4, ss.345-352, 2002 (Hakemli Dergi)

Ageing Behaviour of Spray Cast Al Zn Cu Mg Alloys

SALAMCİ E.
Turkish Journal of Engineering and Enviromental Science , cilt.25, sa.6, ss.681-686, 2001 (Scopus) identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

HİBRİT HÜCRELERE SAHİP KAFES YAPILARIN EKLEMELİ İMALAT İLE ÜRETİLEBİLİRLİĞİNİN ARAŞTIRILMASI

Kıratlı H., Salamci E.
2.International Congress on Innovation Technologies & Engineering, İzmir, Türkiye, 12 - 13 Haziran 2023, ss.271-280 Creative Commons License

SANDVİÇ YAPILARDA KENAR INSERT BAĞLAYICILARINA GRUP ETKİSİNİN İNCELENMESİ

Abay M. M., ÇEKİÇ A., SALAMCİ E., Akçe H.
9. ULUSAL HAVACILIK VE UZAY KONFERANSI, İzmir, Türkiye, 14 Eylül 2022

Composite Rocket Fin Optimization Based On Flutter Analysis

Gözüm S., Örün A. E., Salamci E.
10th Ankara International Aerospace Conference, Ankara, Türkiye, 18 - 20 Eylül 2019

Review of parameters affecting the bonding quality of composite joins

İris M. E., Salamci E.
4th International Porous and Powder Materials Symposium and Exhibition PPM 2019, Ankara, Türkiye, 9 - 11 Eylül 2019, ss.122-127

Comparison of radome sandwich composite structures with finite element method

ÖZDEMİR B., SALAMCİ E., KULOĞLU M.
ICCST/12 12th International Conference on Composite Science and Technology, Sorrento, İtalya, 8 - 10 Mayıs 2019 identifier identifier

Analysis and Manufacturing of Wooden Core and Glass Fiber/Epoxy Face Sheets Sandwich Composite Electric Skateboard

YILDIZ B., PALABIYIK G. C., TÜZEMEN M. Ç., SALAMCİ E.
4th International Conference on Engineering and Natural Science, 2 - 06 Mayıs 2018

Hücresel yapılı tasarımlarda boşluk değerinin belirlenmesine yönelik matematiksel yaklaşım

Dursun A. M., Ünal R., Yılmaz O., Salamci E.
3rd International Congress on 3D printing (Additional Manufacturing) Technologies and Digital Industries, Antalya, Türkiye, 19 - 21 Nisan 2018, ss.660-668

Fırlatma Mekanizmasına Sahip Kompozit İnsansız Hava Aracı Tasarımı ve Üretimi

Gerçeker H., Konuk D., Keskin Y. E., Ercan K., Akay M., TÜZEMEN M. Ç., et al.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018

Hücresel Yapılı Tasarımlarda Hacimsel Boşluk Değerinin Belirlenmesine Yönelik Matematiksel Yaklaşım

Dursun A. M., ÜNAL R., YILMAZ O., Salamcı E.
3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018, Antalya, Türkiye, 19 - 21 Nisan 2018

Investigating The Corrosion Behavior of Electrodeposited Nickel-Nano Diamond Composite Coating On Porous Materials by The Cyclic Voltammetry Method

SAATCI T., SALAMCİ E., ÜNAL R., GİDİKOVA N., VALOV R., VLADİMİR P.
1st International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Türkiye, 2 - 04 Kasım 2017, ss.49-54

Synthesis, characterization and tribological studies of Chromium-Nano diamond composite coating

Zoghipour N., SALAMCİ E., ÜNAL R., gidikova n., valov r., petkov v.
3rd Iron and Steel Symposium(UDCS’17), Karabük, Türkiye, 3 Nisan - 05 Aralık 2017, ss.291-296

Evaluation of Metallic and Composite Materials Used in Aircraft Wings

TÜZEMEN M. Ç., ÇALIŞ A., salamcı E., GENCER C.
2. st International Congress on Engineering Architecture and Design, 12 - 13 Mayıs 2017

EFFECT OF MICROSTRUCTURE ON MECHANICAL PROPERTIES AND ABRASIVE WEAR BEHAVIOR OF LOW CARBON DUAL-PHASE STEELS

TÜZEMEN M. Ç., SALAMCİ E.
12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), Copenhagen, Danimarka, 25 - 27 Haziran 2014 identifier identifier

Effect of Epitaxial Ferrite on Corrosion Behavior of Dual Phase Steels

SALAMCİ E., CANDAN Ş.
EUROCORR 2012 The European Corrosion Congress, İstanbul, Türkiye, 9 - 13 Eylül 2012, ss.257

Yeni Ferrit Hacim Oranının Çift Fazlı Çelikte Çekme Özlellikleri Üzerine Etkisi

KABAKCI F., SALAMCİ E.
5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009

The Friction Behaviour on the External Surface of the Friction Stir Welding of AA 6063 T6 Tubes

GERÇEKCİOĞLU E., EREN T., YILDIZLI K., KAHRAMAN N., SALAMCİ E.
BalkanTrib'05 5 th International Conference on Tribology, Kragujevac, Sırbistan, 15 - 18 Haziran 2005, ss.225-228

Çift fazlı çeliklerin korozyon davranışı üzerine kritik tavlama sıcaklığı ve soğuma hızının etkisi

DEMİR B., CANDAN Ş., SALAMCİ E., ERDOĞAN M.
Proceedings of the IX th International Corrosion Symposium, Ankara, Türkiye, 22 - 25 Eylül 2004, cilt.2, ss.495-501

Metrikler

Yayın

51

Atıf (WoS)

141

H-İndeks (WoS)

7

Atıf (Scopus)

186

H-İndeks (Scopus)

9

Atıf (Scholar)

40

H-İndeks (Scholar)

4

Proje

5

Tez Danışmanlığı

22

Açık Erişim

20
BM Sürdürülebilir Kalkınma Amaçları