Doç.Dr. MELİKA ÖZER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The effect of quenching/double quenching and tempering heat treatment cycles on the microstructure, impact energy and hardness of AISI H13 tool steel

Özer A., Ozer M., Atak Ç., Altuntas G.

CANADIAN METALLURGICAL QUARTERLY , 2023 (SCI-Expanded)

Effect of ball-burnishing on surface integrity and fatigue behaviour of 7175-T6 AA

Özer M., Dalli K., Özer A.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.39, sa.2, ss.248-257, 2023 (SCI-Expanded)

Investigation of the microstructure, hardness and electrical conductivity properties of Fe/Graphene compacts

Altuntas O., ÖZER M., ALTUNTAŞ G., ÖZER A.

Materials Science and Technology (United Kingdom) , cilt.39, sa.17, ss.2670-2679, 2023 (SCI-Expanded)

Influence of different sintering techniques on the wear properties of Al-15Si-2.5Cu-0.5Mg/B4C composites

Ozer M., Kaplan Y., Ozer A., Aksoz S.

SCIENCE OF SINTERING , sa.00, ss.1-20, 2023 (SCI-Expanded)

Influence of heat treatments on microstructure and wear behavior of AISI H13 tool steel

Özer M.

KOVOVE MATERIALY , cilt.60, sa.6, ss.387-396, 2022 (SCI-Expanded)

Influence of spark plasma sintering and conventional sintering on microstructure and mechanical properties of hypereutectic Al-Si alloy and hypereutectic Al-Si/B4C composites

Özer M., Aydoğan S. İ., Özer A., Çinici H., Ayas E.

KOVOVE MATERIALY , cilt.60, sa.3, ss.171-179, 2022 (SCI-Expanded)

Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2,5Cu-0.5Mg compacts and Al-15Si-2,5Cu-0.5Mg/B4C composites

Özer M., Aydoğan S. İ., Çinici H., Özer A.

MATERIALS TODAY COMMUNICATIONS , cilt.30, sa.5, ss.1-14, 2022 (SCI-Expanded)

The effect of friction stir welding parameters on microstructure and fatigue strength of CuZn37 brass alloys

Ozer A., Sik A., Cevik B., Ozer M.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.2, ss.107-114, 2017 (SCI-Expanded)

Effects of the thixocasting injection velocity on tensile properties of an A357 Al alloy

Özer M., Akar N., Kocatepe K., Erdoğan M.

MATERIALS TESTING , cilt.57, sa.9, ss.790-794, 2015 (SCI-Expanded)

Effects of Pouring Distance and Holding Time on the Thixotropic Microstructure of A357 Alloy

ÖZER M., KOCATEPE K., ERDOĞAN M.

MATERIALS TESTING , cilt.56, sa.2, ss.111-117, 2014 (SCI-Expanded)

Comparison of abrasive wear behavior of ductile iron with different dual matrix structures

Sahin Y., KILIÇLI V., ÖZER M., ERDOĞAN M.

WEAR , cilt.268, ss.153-165, 2010 (SCI-Expanded)

Effect of martensite volume fraction and tempering time on abrasive wear of ferritic ductile iron with dual matrix

Sahin Y., Erdogan M., Cerah M.

WEAR , cilt.265, ss.196-202, 2008 (SCI-Expanded)

Investigation of the variations in microstructure and mechanical properties of dual-matrix ductile iron by Magnetic Barkhausen Noise analysis

GÜR C. H., ÖZER M., ERDOĞAN M.

RESEARCH IN NONDESTRUCTIVE EVALUATION , cilt.19, sa.1, ss.44-60, 2008 (SCI-Expanded)

The tensile fracture behaviour of intercritically annealed and quenched plus tempered ferritic ductile iron with dual matrix structure

Kocatepe K., Cerah M., Erdogan M.

MATERIALS & DESIGN , sa.1, ss.172-181, 2007 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of martensite volume fraction and its morphology on the tensile properties of ferritic ductile iron with dual matrix structures

Kocatepe K., Cerah M., Erdogan M.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , sa.1-3, ss.44-51, 2006 (SCI-Expanded) Sürdürülebilir Kalkınma

Influence of intercritical austenitising, tempering time and martensite volume fraction on the tensile properties of ferritic ductile iron with dual matrix structure

Erdogan M., Cerah M., Kocatepe K.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , sa.4, ss.248-253, 2006 (SCI-Expanded) Sürdürülebilir Kalkınma

Influence of martensite volume fraction and tempering time on tensile properties of partially austenitized in the (α plus γ) temperature range and quenched plus tempered ferritic ductile iron

Cerah M., Kocatepe K., Erdogan M.

JOURNAL OF MATERIALS SCIENCE , sa.13, ss.3453-3459, 2005 (SCI-Expanded) Sürdürülebilir Kalkınma

Diğer Dergilerde Yayınlanan Makaleler

AISI H13 Takım Çeliğine Uygulanan Derin Kriyojenik İşlem ve Temperleme Isıl İşleminin Mikroyapı, Sertlik ve Darbe Enerjisine Etkisi

ÖZER M.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.7, sa.3, ss.688-699, 2019 (Hakemli Dergi)

The Fatigue Strength of AISI 430 304 Stainless Steels Welded by CO2 Laser Beam Welding

ÇALIGÜLÜ U., TÜRKMEN M., ÖZER A., TAŞKIN M., ÖZER M.

Metallofizika I Noveishie Tekhnologii , cilt.37, sa.6, ss.839-852, 2015 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effect On Microstructure And Hardness Of Double Quenching Heat Treatment Applied To AISI H13 Hot Work Tool Steel

ÖZER M., ATAK Ç.

4th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2022), Ankara, Türkiye, 14 Aralık 2022, ss.117

AA7075/B4C/NANO GRAFEN YÜZEY KATMANLI KOMPOZIT MALZEMELERİN ÜRETIMI VE MIKROYAPI ÖZELLİKLERININ İNCELENMESİ

Yaman G., KARAKOÇ H., ÖZER M.

TASHKENT II-International Congress on Modern Sciences, Tashkent, Özbekistan, 16 Aralık 2022, cilt.1, ss.352-353

AA7075 ALAŞIMINA UYGULANAN BİLYELİ HADDELEME İŞLEMİNDE İLERLEME HIZININ YÜZEY PÜRÜZLÜLÜĞÜNE ETKİSİ

ÖMÜRLÜ B., ALTUNTAŞ O., ÖZER M.

3RD INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, AND APPLIED SCIENCES, Baku, Azerbaycan, 26 Kasım 2022, ss.117-118

EN AW 6063 AL ALAŞIMINA UYGULANAN SICAK EKSTRÜZYON VE T5 ISIL İŞLEMİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİ

ÖZER M.

ANKARA V. ULUSLARARASI  BİLİMSEL ARAŞTIRMALAR  KONGRESİ, Ankara, Türkiye, 10 - 12 Ekim 2021, ss.27-37

7175-T6 AL ALAŞIMINA UYGULANAN YÜZEY HADDELEME İŞLEMİNDE İLERLEME HIZININ YÜZEY PÜRÜZLÜĞÜ VE YORULMA DAYANIMINA ETKİSİ

Dalli K., Özer M., Yılmaz T., Özer A.

3. Uluslararası Bakü Bilimsel Araştırmalar Kongresi, Baku, Azerbaycan, 15 - 16 Ekim 2021, ss.1043-1050

ELEKTRO-MANYETİK KARIŞTIRMA YÖNTEMİ İLE AA7050 ALAŞIMINDA TİKSOTROPİK ÖN-MALZEME ÜRETİMİ

VADİ S., ÖZER A., ATAKUL S., ÖZER M.

7. ULUSLARARASI MUHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 21 Mayıs 2021, ss.199-204

Effects of Sintering Time on Density and Microstructure of Al-15Si-2.5Cu-0.5Mg / B4C Composites in Microwave Sintering Process

Aydoğan S. İ., Özer M., Çinici H., Özer A.

International Conference on Advanced Materials Science Engineeringand High Tech Devices Applications Exhibition (ICMATSE 2020), Ankara, Türkiye, 2 - 04 Ekim 2020, ss.70-74

Effects of Sintering Temperature on Density and Microstructure of Al-15Si-2.5Cu0.5Mg/B4C Composites

Aydoğan S. İ., Özer M., Çinici H., Özer A.

International Conference on Advanced Materials Science Engineeringand High Tech Devices Applications Exhibition (ICMATSE 2020), Ankara, Türkiye, 2 - 04 Ekim 2020, ss.44-49