Prof. ABBAS TAMER ÖZDEMİR

Publication Network

Articles 27

1. Investigation of the impacts of artificial ageing, re-ageing and cryogenic cycles on multiplex second phase precipitation and life-time prediction in 7075 alloy

Altuntaş G., Özdemir A. T., Bostan B.

Materials Today Communications , vol.40, 2024 (SCI-Expanded, Scopus)

2. A survey of the effect of cryogenic treatment and natural ageing on structural changes and second-phase precipitation in Al–Zn–Mg–Cu alloy

Altuntaş G., Özdemir A. T., Bostan B.

Journal of Thermal Analysis and Calorimetry , vol.148, no.20, pp.10713-10725, 2023 (SCI-Expanded, Scopus)

3. Effect of Isothermal Transformation Treatment and Tempering on the Microstructure and Hardness of a Medium C and High Si Steels

Kafadar G., KALKANLI A., ÖZDEMİR A. T., ÖGEL B.

ISIJ INTERNATIONAL , vol.61, no.5, pp.1679-1687, 2021 (SCI-Expanded, Scopus)

4. Effect of thermo-mechanical alloying and ageing in AA2014 aluminium alloys after synthesized using graphite

ÖZDEMİR A. T., AKSÖZ S.

BULLETIN OF MATERIALS SCIENCE , vol.43, no.1, 2020 (SCI-Expanded, Scopus)

5. Experimental assessment of the redistribution of 3D residual stresses during early fatigue at split-sleeve cold expanded reamed A/C fastener holes

Ozdemir A. T.

SCIENTIA IRANICA , vol.25, no.3, pp.1153-1168, 2018 (SCI-Expanded)

6. Effect of sub-Zero Treatment on Ageing of Aluminium Composite

Taşkesen A., Özdemir A. T., Aksoz S.

International Journal of Materials, Mechanics and Manufacturing , vol.6, no.1, pp.26-30, 2018 (Peer-Reviewed Journal)

7. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique

ATEŞ H., Ozdemir A. T., Uzun M., Uygur I.

SCIENTIA IRANICA , vol.24, no.4, pp.1950-1957, 2017 (SCI-Expanded, Scopus)

8. The effect of cryogenic treatment on ageing behaviour of B4C reinforced 7075 aluminium composite

Taskesen A., Aksoz S., Ozdemir A. T.

KOVOVE MATERIALY-METALLIC MATERIALS , vol.55, no.1, pp.57-67, 2017 (SCI-Expanded)

9. EFFECTS OF SINTERING, AGEING AND CRYOGENIC TREATMENTS ON STRUCTURAL AND MECHANICAL PROPERTIES OF AA2014-B4C COMPOSITE

Aksoz S., Ozdemir A. T., ÇALIN R., Altinok Z., BOSTAN B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.28, no.4, pp.831-839, 2013 (SCI-Expanded, Scopus, TRDizin)

10. Microstructure and electrical resistivity features in Al-Al 4 C 3in-situ composite after attrition milling and double sequence of compaction and high temperature treatment

Ozdemir A. T., Bostan B.

Kovove Materialy , vol.50, no.2, pp.89-95, 2012 (SCI-Expanded)

11. ALLOYED AA2014 ALUMINIUM POWDERS SYNTHESIZED WITH CARBON AND DETERMINED PROPERTIES

Aksoz S., Ozdemir A. T., BOSTAN B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , no.1, pp.109-115, 2012 (SCI-Expanded, Scopus) Sustainable Development

12. Alloyed AA2014 Aluminium Powders Synthesized with Carbon and Determined Properties.

Özdemir A. T., Bostan B., Aksöz S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.27, no.1, pp.109-115, 2012 (SCI-Expanded, Scopus)

13. Artificial neural networks solution to display residual hoop stress field encircling a split-sleeve cold expanded aircraft fastener hole

Toktas I., Ozdemir A. T.

EXPERT SYSTEMS WITH APPLICATIONS , vol.38, no.1, pp.553-563, 2011 (SCI-Expanded)

14. Contemporary analyses in assessing residual stress topographic images enclosing a cold expanded hole

Ozdemir A. T., Toktas I.

CANADIAN METALLURGICAL QUARTERLY , vol.47, no.1, pp.59-70, 2008 (SCI-Expanded, Scopus)

15. Heat treatment in two phase region and its effect on microstructure and mechanical strength after welding of a low carbon steel

Güral A., Bostan B., Ozdemir A. T.

Materials and Design , vol.28, no.3, pp.897-903, 2007 (SCI-Expanded)

16. An assessment of the complete through thickness residual stress distribution after the split sleeve cold expansion of fastener holes

Ozdemir A. T., Edwards L.

CANADIAN METALLURGICAL QUARTERLY , vol.43, no.2, pp.239-247, 2004 (SCI-Expanded)

17. Microstructure characteristics in Al-C system after mechanical alloying and high temperature treatment

Bostan B., Ozdemir A. T., Kalkanli A.

Powder Metallurgy , vol.47, no.1, pp.37-42, 2004 (SCI-Expanded)

18. Through-thickness residual stress distribution after the cold expansion of fastener holes and its effect on fracturing

Ozdemir A. T., Edwards L.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , vol.126, no.1, pp.129-135, 2004 (SCI-Expanded)

19. Recrystallization kinetic of Fe-5.23%V and Fe-15%V alloys Fe-%5,23V ve Fe-%15V alaşimlarinin yeniden kristalleşme kinetiǧi

BOSTAN B., ÖZDEMİR A. T.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.18, no.1, pp.101-108, 2003 (SCI-Expanded, Scopus, TRDizin)

20. Soğuk işlenmiş Fe 5 V ve Fe 15 V alaşımlarında ısıl işlem sıcaklıklarına bağlı mikroyapısal değişim / EFFECT OF ANNEALING TEMPERATURES ON MICROSTRUCTURAL CHANGES IN COLDWORKED Fe-%5V AND Fe-%15V ALLOYS

Bostan B., Özdemir A. T.

Karabük Teknik Eğitim Fakültesi Dergisi , vol.1, no.2, pp.113-119, 2003 (Peer-Reviewed Journal)

21. Farklı Deformasyon Oranlarında Fe 5 23 V Alaşımının Yeniden Kristalleşme Kinetiği / Recyrstallization kinetics of Fe- % 5.23 V alloy at various degrees of deformation

Bostan B., Özdemir A. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.4, pp.15-19, 2002 (TRDizin)

22. Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes

Ozdemir A. T., Hermann R.

JOURNAL OF MATERIALS SCIENCE , vol.34, no.6, pp.1243-1252, 1999 (SCI-Expanded, Scopus)

23. Microstructural changes on high temperature treatment of a cold-worked and nitrided Fe-1% V alloy

Ozdemir A. T., Atasoy O.

JOURNAL OF MATERIALS SCIENCE , vol.33, no.10, pp.2683-2690, 1998 (SCI-Expanded, Scopus)

24. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading

Ozdemir A., Edwards L.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , vol.20, no.10, pp.1443-1451, 1997 (SCI-Expanded)

25. Measurement of the three-dimensional residual stress distribution around split-sleeve cold-expanded holes

ÖZDEMİR A. T., Edwards L.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , vol.31, no.6, pp.413-421, 1996 (SCI-Expanded, Scopus)

26. Measurement of the 3D residual stress distribution at split sleeve cold expanded holes.

Özdemir A. T., Wang D., Edwards L.

INTERNATIONAL JOURNAL OF FATIGUE , vol.17, no.8, pp.587-595, 1995 (SCI-Expanded, ESCI, Scopus, TRDizin)

27. Effect Of Residual Stress On Fatigue Life Of Cold Expanded Fastener Holes

Özdemir A. T., Edwards L.

WIT TRANSACTIONS ON ENGINEERING SCIENCES , vol.2, pp.1-9, 1993 (SCI-Expanded)

Books 3

1. Residual Stress Distributions around Cold Expanded Holes

Özdemir A. T., Cook R., Edwards L.

in: International Committee on Aeronautical Fatigue, ICAF-17: Durability and Structural Integrity of Airframes, 14TH PLANTEMA MEMORIAL LECTURE, ISBN 0 947817 66 2 (1993), 1215 pages in 2 volumes , A.F. Blom, Editor, Engineering Press , Dudley, pp.207-220, 1993

2. Effect of Residual Stress on Fatigue Life of Cold Expanded Fastener Holes

Edwards L., Özdemir A. T.

in: Computer Methods and Experimental Measurements for Surface Treatment Effects 1. ISBN:1562521500, (1 April, 1993), C. A. Brebbia,M. H. Aliabadi, Editor, Computational Mechanics Inc. , Southampton, pp.101-109, 1993

3. Residual Stresses at Cold Expanded Fastener Holes

Edwards L., Özdemir A. T.

in: 'Measurement of Residual and Applied Stress Using Neutron Diffraction' Nato Advanced Research Workshop Series-NATO Science Series E: (NSSE, Volume 216), Michael T. Hutchings (Director),Aaron D. Krawitz (Deputy Director), Editor, Springer-Verlag , Dordrecht, pp.545-553, 1992

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

384

H-Index (WoS)

Citation (Scopus)

449

H-Index (Scopus)

Citation (Scholar)

662

H-Index (Scholar)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works