Prof. Dr. ABBAS TAMER ÖZDEMİR

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of the impacts of artificial ageing, re-ageing and cryogenic cycles on multiplex second phase precipitation and life-time prediction in 7075 alloy

Altuntaş G., Özdemir A. T., Bostan B.

Materials Today Communications , cilt.40, 2024 (SCI-Expanded)

A survey of the effect of cryogenic treatment and natural ageing on structural changes and second-phase precipitation in Al–Zn–Mg–Cu alloy

Altuntaş G., Özdemir A. T., Bostan B.

Journal of Thermal Analysis and Calorimetry , cilt.148, sa.20, ss.10713-10725, 2023 (SCI-Expanded)

Effect of Isothermal Transformation Treatment and Tempering on the Microstructure and Hardness of a Medium C and High Si Steels

Kafadar G., KALKANLI A., ÖZDEMİR A. T., ÖGEL B.

ISIJ INTERNATIONAL , cilt.61, sa.5, ss.1679-1687, 2021 (SCI-Expanded)

Effect of thermo-mechanical alloying and ageing in AA2014 aluminium alloys after synthesized using graphite

ÖZDEMİR A. T., AKSÖZ S.

BULLETIN OF MATERIALS SCIENCE , cilt.43, sa.1, 2020 (SCI-Expanded)

Experimental assessment of the redistribution of 3D residual stresses during early fatigue at split-sleeve cold expanded reamed A/C fastener holes

Ozdemir A. T.

SCIENTIA IRANICA , cilt.25, sa.3, ss.1153-1168, 2018 (SCI-Expanded)

Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique

ATEŞ H., Ozdemir A. T., Uzun M., Uygur I.

SCIENTIA IRANICA , cilt.24, sa.4, ss.1950-1957, 2017 (SCI-Expanded)

The effect of cryogenic treatment on ageing behaviour of B4C reinforced 7075 aluminium composite

Taskesen A., Aksoz S., Ozdemir A. T.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.1, ss.57-67, 2017 (SCI-Expanded)

EFFECTS OF SINTERING, AGEING AND CRYOGENIC TREATMENTS ON STRUCTURAL AND MECHANICAL PROPERTIES OF AA2014-B4C COMPOSITE

Aksoz S., Ozdemir A. T., ÇALIN R., Altinok Z., BOSTAN B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.4, ss.831-839, 2013 (SCI-Expanded)

Microstructure and electrical resistivity features in Al-Al 4 C 3in-situ composite after attrition milling and double sequence of compaction and high temperature treatment

Ozdemir A. T., Bostan B.

Kovove Materialy , cilt.50, sa.2, ss.89-95, 2012 (SCI-Expanded)

ALLOYED AA2014 ALUMINIUM POWDERS SYNTHESIZED WITH CARBON AND DETERMINED PROPERTIES

Aksoz S., Ozdemir A. T., BOSTAN B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , sa.1, ss.109-115, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

Alloyed AA2014 Aluminium Powders Synthesized with Carbon and Determined Properties.

Özdemir A. T., Bostan B., Aksöz S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.1, ss.109-115, 2012 (SCI-Expanded)

Artificial neural networks solution to display residual hoop stress field encircling a split-sleeve cold expanded aircraft fastener hole

Toktas I., Ozdemir A. T.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.38, sa.1, ss.553-563, 2011 (SCI-Expanded)

Contemporary analyses in assessing residual stress topographic images enclosing a cold expanded hole

Ozdemir A. T., Toktas I.

CANADIAN METALLURGICAL QUARTERLY , cilt.47, sa.1, ss.59-70, 2008 (SCI-Expanded)

Heat treatment in two phase region and its effect on microstructure and mechanical strength after welding of a low carbon steel

Güral A., Bostan B., Ozdemir A. T.

Materials and Design , cilt.28, sa.3, ss.897-903, 2007 (SCI-Expanded)

An assessment of the complete through thickness residual stress distribution after the split sleeve cold expansion of fastener holes

Ozdemir A. T., Edwards L.

CANADIAN METALLURGICAL QUARTERLY , cilt.43, sa.2, ss.239-247, 2004 (SCI-Expanded)

Microstructure characteristics in Al-C system after mechanical alloying and high temperature treatment

Bostan B., Ozdemir A. T., Kalkanli A.

Powder Metallurgy , cilt.47, sa.1, ss.37-42, 2004 (SCI-Expanded)

Through-thickness residual stress distribution after the cold expansion of fastener holes and its effect on fracturing

Ozdemir A. T., Edwards L.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.126, sa.1, ss.129-135, 2004 (SCI-Expanded)

Recrystallization kinetic of Fe-5.23%V and Fe-15%V alloys Fe-%5,23V ve Fe-%15V alaşimlarinin yeniden kristalleşme kinetiǧi

BOSTAN B., ÖZDEMİR A. T.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.18, sa.1, ss.101-108, 2003 (SCI-Expanded)

Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes

Ozdemir A. T., Hermann R.

JOURNAL OF MATERIALS SCIENCE , cilt.34, sa.6, ss.1243-1252, 1999 (SCI-Expanded)

Microstructural changes on high temperature treatment of a cold-worked and nitrided Fe-1% V alloy

Ozdemir A. T., Atasoy O.

JOURNAL OF MATERIALS SCIENCE , cilt.33, sa.10, ss.2683-2690, 1998 (SCI-Expanded)

Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading

Ozdemir A., Edwards L.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , cilt.20, sa.10, ss.1443-1451, 1997 (SCI-Expanded)

Measurement of the three-dimensional residual stress distribution around split-sleeve cold-expanded holes

ÖZDEMİR A. T., Edwards L.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , cilt.31, sa.6, ss.413-421, 1996 (SCI-Expanded)

Measurement of the 3D residual stress distribution at split sleeve cold expanded holes.

Özdemir A. T., Wang D., Edwards L.

INTERNATIONAL JOURNAL OF FATIGUE , cilt.17, sa.8, ss.587-595, 1995 (SCI-Expanded)

Effect Of Residual Stress On Fatigue Life Of Cold Expanded Fastener Holes

Özdemir A. T., Edwards L.

WIT TRANSACTIONS ON ENGINEERING SCIENCES , cilt.2, ss.1-9, 1993 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Effect of sub-Zero Treatment on Ageing of Aluminium Composite

Taşkesen A., Özdemir A. T., Aksoz S.

International Journal of Materials, Mechanics and Manufacturing , cilt.6, sa.1, ss.26-30, 2018 (Hakemli Dergi)

Soğuk işlenmiş Fe 5 V ve Fe 15 V alaşımlarında ısıl işlem sıcaklıklarına bağlı mikroyapısal değişim / EFFECT OF ANNEALING TEMPERATURES ON MICROSTRUCTURAL CHANGES IN COLDWORKED Fe-%5V AND Fe-%15V ALLOYS

Bostan B., Özdemir A. T.

Karabük Teknik Eğitim Fakültesi Dergisi , cilt.1, sa.2, ss.113-119, 2003 (Hakemli Dergi)

Farklı Deformasyon Oranlarında Fe 5 23 V Alaşımının Yeniden Kristalleşme Kinetiği / Recyrstallization kinetics of Fe- % 5.23 V alloy at various degrees of deformation

Bostan B., Özdemir A. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.4, ss.15-19, 2002 (Hakemli Dergi)

Kitaplar

Residual Stress Distributions around Cold Expanded Holes

Özdemir A. T., Cook R., Edwards L.

International Committee on Aeronautical Fatigue, ICAF-17: Durability and Structural Integrity of Airframes, 14TH PLANTEMA MEMORIAL LECTURE, ISBN 0 947817 66 2 (1993), 1215 pages in 2 volumes , A.F. Blom, Editör, Engineering Press , Dudley, ss.207-220, 1993

Effect of Residual Stress on Fatigue Life of Cold Expanded Fastener Holes

Edwards L., Özdemir A. T.

Computer Methods and Experimental Measurements for Surface Treatment Effects 1. ISBN:1562521500, (1 April, 1993), C. A. Brebbia,M. H. Aliabadi, Editör, Computational Mechanics Inc. , Southampton, ss.101-109, 1993

Residual Stresses at Cold Expanded Fastener Holes

Edwards L., Özdemir A. T.

'Measurement of Residual and Applied Stress Using Neutron Diffraction' Nato Advanced Research Workshop Series-NATO Science Series E: (NSSE, Volume 216), Michael T. Hutchings (Director),Aaron D. Krawitz (Deputy Director), Editör, Springer-Verlag , Dordrecht, ss.545-553, 1992

Metrikler

Yayın

Atıf (WoS)

384

H-İndeks (WoS)

Atıf (Scopus)

449

H-İndeks (Scopus)

Atıf (Scholar)

662

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler