Prof.Dr. OĞUZHAN YILMAZ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Enhancement of surface characteristics of additively manufactured γ-TiAl and IN939 alloys after laser shock processing

Ozer M., Yılmaz O., Subasi L., Gunaydin A., Mert Bilgin G., Zulić S., et al.

OPTICS AND LASER TECHNOLOGY , cilt.170, ss.1-11, 2024 (SCI-Expanded)

Directed energy deposition of PH 13–8 Mo stainless steel: microstructure and mechanical property analysis

KAŞ M., Muslim T., YILMAZ O., Karagoz T., TÜREDİ E., GÜMÜŞ S., et al.

International Journal of Advanced Manufacturing Technology , 2024 (SCI-Expanded)

Influence of laser polishing process parameters on surface integrity and morphology of Ti-6Al-4V parts produced via electron beam melting

Nesli S., YILMAZ O., Polat C., Yıldırım K., Gövez U., Tan E.

International Journal of Advanced Manufacturing Technology , cilt.128, sa.1-2, ss.845-860, 2023 (SCI-Expanded)

Electrochemical machining of additively manufactured γ-TiAl parts: post-processing technique to reduce surface roughness

Demirtas H., Cebi A., Aslan M. T., YILMAZ O., Nesli S., Subasi L., et al.

International Journal of Advanced Manufacturing Technology , cilt.127, sa.5-6, ss.2475-2485, 2023 (SCI-Expanded)

A deposition strategy for Wire Arc Additive Manufacturing based on temperature variance analysis to minimize overflow and distortion

Alhakeem M. M., Mollamahmutoglu M., YILMAZ O., Bol N., Kara O. E.

Journal of Manufacturing Processes , cilt.85, ss.1208-1220, 2023 (SCI-Expanded)

The effect of evaporation and recoil pressure on energy loss and melt pool profile in selective electron beam melting

Mollamahmutoglu M., YILMAZ O., ÜNAL R., Gumus B., Tan E.

International Journal of Advanced Manufacturing Technology , cilt.120, ss.4041-4050, 2022 (SCI-Expanded)

Computational Evaluation of Temperature-Dependent Microstructural Transformations of Ti6Al4V for Laser Powder Bed Fusion Process

Yildiz A. K., Mollamahmutoglu M., Yılmaz O.

Journal Of Materials Engineering And Performance , cilt.1, sa.1, ss.1-15, 2022 (SCI-Expanded)

Micromechanical Characterization of Additively Manufactured Ti-6Al-4V Parts Produced by Electron Beam Melting

ÖZERİNÇ S., Kaygusuz B., KAŞ M., Motallebzadeh A., Nesli S., Duygulu O., et al.

JOM , cilt.73, sa.10, ss.3021-3033, 2021 (SCI-Expanded)

Radially graded porous structure design for laser powder bed fusion additive manufacturing of Ti-6Al-4V alloy

Kaş M., Yılmaz O.

Journal of Materials Processing Technology , cilt.296, 2021 (SCI-Expanded)

Volumetric heat source model for laser-based powder bed fusion process in additive manufacturing

Mollamahmutoglu M., YILMAZ O.

Thermal Science and Engineering Progress , cilt.25, 2021 (SCI-Expanded)

Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process

Nesli S., YILMAZ O.

International Journal of Advanced Manufacturing Technology , cilt.114, ss.271-289, 2021 (SCI-Expanded)

Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics

Yildiz A. S., Davut K., Koc B., Yılmaz O.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.108, ss.3391-3404, 2020 (SCI-Expanded)

Experimental investigation of the effects of dedicated electrochemical machining parameters on freeform surface machining

Demirtas H., YILMAZ O., Kanber B.

JOURNAL OF MANUFACTURING PROCESSES , cilt.43, ss.244-252, 2019 (SCI-Expanded)

Controlling short circuiting, oxide layer and cavitation problems in electrochemical machining of freeform surfaces

Demirtaş H., Yılmaz O., Kanber B.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.262, ss.585-596, 2018 (SCI-Expanded)

Development and control of shaped metal deposition process using tungsten inert gas arc heat source in additive layered manufacturing

Ugla A. A., YILMAZ O., Almusawi A. R. J.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.232, sa.9, ss.1628-1641, 2018 (SCI-Expanded)

Deposition-Path Generation of SS308 Components Manufactured by TIG Welding-Based Shaped Metal Deposition Process

Ugla A. A., YILMAZ O.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.11, ss.4701-4711, 2017 (SCI-Expanded)

A simplified mathematical model development for the design of free-form cathode surface in electrochemical machining

DEMİRTAŞ H., YILMAZ O., KANBER B.

MACHINING SCIENCE AND TECHNOLOGY , cilt.21, sa.1, ss.157-173, 2017 (SCI-Expanded)

Development of a cold wire-feed additive layer manufacturing system using shaped metal deposition method

YILMAZ O., Ugla A. A.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.4, ss.1611-1620, 2017 (SCI-Expanded)

Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arc

YILMAZ O., Ugla A. A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.89, ss.13-25, 2017 (SCI-Expanded)

Shaped metal deposition technique in additive manufacturing: A review

YILMAZ O., Ugla A. A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.230, sa.10, ss.1781-1798, 2016 (SCI-Expanded)

An intelligent and automated system for electrical discharge drilling of aerospace alloys: Inconel 718 and Ti-6Al-4V

Yilmaz O., Bozdana A. T., Okka M. A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.74, ss.1323-1336, 2014 (SCI-Expanded)

Effect of single and multi-channel electrodes application on EDM fast hole drilling performance

Yilmaz O., Okka M. A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.51, ss.185-194, 2010 (SCI-Expanded)

A repair and overhaul methodology for aeroengine components

Yilmaz O., Gindy N., Gao J.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING , cilt.26, ss.190-201, 2010 (SCI-Expanded)

Interactive fixture and tool space design considering tool movement, machine, and inspection for five-axis grinding

Wang Y., Wang Z., Yilmaz O., Gindy N.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.224, ss.543-552, 2010 (SCI-Expanded)

An integrated adaptive repair solution for complex aerospace components through geometry reconstruction

Gao J., Chen X., Yilmaz O., Gindy N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.36, ss.1170-1179, 2008 (SCI-Expanded)

Adaptive restoration of complex geometry parts through reverse engineering application

Gao J., Chen X., Zheng D., Yihnaz O., Gindy N.

ADVANCES IN ENGINEERING SOFTWARE , cilt.37, ss.592-600, 2006 (SCI-Expanded)

A user-friendly fuzzy-based system for the selection of electro discharge machining process parameters

Yimaz O., Eyercioglu O., Gindy N.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.172, sa.3, ss.363-371, 2006 (SCI-Expanded)

A study of turbomachinery components machining and repairing methodologies

Yilmaz O., Noble D., Gindy N., Gao F.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , cilt.77, sa.6, ss.455-466, 2005 (SCI-Expanded)

Investigation of a 3D non-contact measurement based blade repair integration system

Gao J., Folkes A., Yilmaz O., Gindy N.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , cilt.77, sa.1, ss.34-41, 2005 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Recent Inventions in Additive Manufacturing: Holistic Review

Fidan I., Huseynov O., Ali M. A., Alkunte S., Rajeshirke M., Gupta A., et al.

Inventions , cilt.8, sa.4, 2023 (ESCI)

Computational Evaluation of the Effect of Build Orientation on Thermal Behavior and in-situ Martensite Decomposition for Laser Powder-Bed Fusion (LPBF) Process

Yildiz A. K., MOLLAMAHMUTOĞLU M., YILMAZ O.

Gazi University Journal of Science , cilt.36, sa.2, ss.870-880, 2023 (ESCI)

Investigation of Compatibility Between Design and Additively Manufactured Parts of Functionally Graded Porous Structures

Dursun A. M., Tüzemen M. Ç., Salamci E., Yılmaz O., Ünal R.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.25, sa.3, ss.1069-1082, 2022 (ESCI)

Investigation of Laser Polishing on the Surface of the Parts Produced Using Powder Bed Fusion

NESLI S., YILMAZ O.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.35, sa.2, ss.695-699, 2022 (ESCI)

Deposition path planning strategy for geometries with varying cross-sections in wire arc additive manufacturing

Soufiani B. N., Bol N., Kara E., Şen A., Yılmaz O.

Journal of Additive Manufacturing Technologies , cilt.1, sa.3, ss.1-5, 2021 (Hakemli Dergi)

Influence of laser energy density on geometrical forms produced by laser metal deposition of PH 13-8 Mo stainless steel

Muslim T., Karagöz T., Yılmaz O., Kaş M., Özkök R.

Journal of Additive Manufacturing Technologies , cilt.1, sa.3, ss.1-5, 2021 (Hakemli Dergi)

A numerical investigation of the effect of support thickness and void ratio on thermal behavior and possible martensite decomposition in laser powder-bed fusion process

Yildiz A. K., Mollamahmutoğlu M., Doğan A., Yılmaz O.

Journal of Additive Manufacturing Technologies , cilt.1, sa.2, ss.1-5, 2021 (Hakemli Dergi)

Building strategy effect on mechanical properties of high strength low alloy steel in wire + arc additive manufacturing

Yılmaz O., Yıldız A. S.

Zavarivanje i zavarene konstrukcije , cilt.65, ss.125-136, 2020 (Hakemli Dergi)

Makro ve Mikro Boyutlarda Üretim Yapabilen Elektrokimyasal İşleme Tezgâhında İşlem Parametreleri Etkilerinin İncelenmesi

DEMİRTAŞ H., YILMAZ O., KANBER B.

Makina Tasarım ve İmalat Dergisi , cilt.15, sa.1, ss.11-18, 2017 (Hakemli Dergi)

Pityriasis Likenoides et Varilioformis Acuta (PLEVA) prediagnosed as mastoscytosis

ERTOY KARAGÖL H. İ., YILMAZ O., Gonul I. I., TOPAL E., BAKIRTAŞ A.

ASTIM ALLERJI IMMUNOLOJI , cilt.12, sa.1, ss.50-53, 2014 (ESCI) Sürdürülebilir Kalkınma

Non-steroidal anti-inflammatory drug hypersensitivity in children

YILMAZ O., ERTOY KARAGÖL H. İ., BAKIRTAŞ A.

ASTIM ALLERJI IMMUNOLOJI , cilt.12, sa.3, ss.123-129, 2014 (ESCI)

Ceftriaxone intradermal test: unexpected cause of anaphylaxis in a four year old child

Topal E., BAKIRTAŞ A., ERTOY KARAGÖL H. İ., YILMAZ O., Demirsoy M. S., TÜRKTAŞ İ.

ASTIM ALLERJI IMMUNOLOJI , cilt.12, sa.3, ss.171-174, 2014 (ESCI)

Two main wheezing phenotypes in preschool age: similarities, differences and comparisons of clinical progressions

Topal E., BAKIRTAŞ A., YILMAZ O., ERTOY KARAGÖL H. İ., Arga M., Demirsoy M. S., et al.

ASTIM ALLERJI IMMUNOLOJI , cilt.10, sa.3, ss.121-128, 2012 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Recent Advances in Wire Arc Additive Manufacturing Technologies

Yılmaz O.

ADVANCES IN WELDING and METAL ADDITIVE MANUFACTURING TECHNOLOGIES, İstanbul, Türkiye, 30 - 31 Ekim 2023, ss.17

MICROSTRUCTURE AND BONDING MECHANISM EVALUATION FOR BI-METALLIC SS 316-INCONEL718 PRODUCED BY DIRECTED ENERGY DEPOSTION PROCESS

Kaş M., Yılmaz O., Aslan Çığır B., Kırlı O., Yücel B., Dak M.

AMCTURKEY 2022, Aydın, Türkiye, 6 - 08 Ekim 2022, ss.110-111

DEPOSITION TOOL PATH STRATEGIES FOR TOPOLOGICALLY OPTIMISED AIRCRAFT PART FOR DED

Yazıcı Ö. F., Kaş M., Atalay İ., Özkök R., Yılmaz O.

Additive Manufacturing Conference , İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.41

INLET GEOMETRY DESIGN FOR GAS FLOW IN POWDER BED FUSION PROCESS

Gebel M. E., Yılmaz O., Köeseoğlu C., Tecer H., Emir E. Z.

Additive Manufacturing Conference, İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.39

DEPOSITION PATH PLANNING STRATEGY FOR GEOMETRIES WITH VARYING CROSS-SECTIONS IN WIRE ARC ADDITIVE MANUFACTURING

Soufiani B. N., Bol N., Kara O. E., Şen A. A., Yılmaz O.

Additive Manufacturing Conference, İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.27

Small-Scale Mechanical Behavior of Ti–6Al–4V Parts Produced by Electron Beam Melting

Özerinç S., Kaygusuz B., Kaş M., Motallebzadeh A., Nesli Ş., Duygulu Ö., et al.

Additive MAnufacturing Conference , İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.46

A numerical investigation of the effect of support thickness and void ratio on thermal behavior and possible martensite decomposition in laser powder-bed fusion process

Yıldız A. K., Mollamahmutoğlu M., Doğan A., Yılmaz O.

Additive Manufacturing Conference, İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.22

Influence of laser energy density on geometrical forms produced by laser metal deposition of PH 13-8 Mo stainless steel

Muslim T., Karagöz T., Yılmaz O., Kaş M., Özkök R.

Additive Manufacturing Conference , İstanbul, Türkiye, 9 - 10 Eylül 2021, ss.6

Process Parameter Optimization for Wire and Arc Additive Manufacturing (WAAM) of 316LSi Steel

Başkan M., Türeyen E. B., Can G., Keleş M., Kahraman E., Önem O. U., et al.

20th International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, ss.254-258

Surface quality improvement using electro chemical machining process for ?-TiAl parts produced by electron beam melting

Demirtas H., YILMAZ O., Subasi L., Gunaydin A., Bilgin G. M., Orhangul A., et al.

18th CIRP Conference on Modeling of Machining Operations, CMMO 2021, Ljubljana, Slovenya, 15 - 17 Haziran 2021, cilt.102, ss.240-245

Structural Optimization of Airplane Component Using Topology Optimization for Additive Manufacturing

ASLAN B., YILMAZ O.

International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 02 Ekim 2020

THERMOMECHANICAL SIMULATION ANALYSIS OF INCONEL 718 ALLOY PARTS PRODUCED BY ADDITIVE MANUFACTURING

Kaş M., Yılmaz O., Güler C., Karagöz T., Metin Ç.

The International Conference of Materials and Engineering Technology (TICMET’xx20), Gaziantep, Türkiye, 5 - 07 Kasım 2020

On The Improvement of Geometrical Outcomes of EBM Parts with a Novel Design Approach

Gövez U., Yılmaz O., Tan E., Gümüş B.

3rd International Conference on Electron Beam Additive Manufacturing, Erlangen, Almanya, 5 - 07 Ekim 2020

Thermal behavior determination for wire arc additive manufacturing process

Yildiz A. S., Koc B., YILMAZ O.

10th CIRP Sponsored Conference on Digital Enterprise Technologies - Digital Technologies as Enablers of Industrial Competitiveness and Sustainability, DET 2020, Budapest, Macaristan, 12 - 14 Ekim 2020, cilt.54, ss.233-237

A novel machine tool concept: Robotic electrochemical machining

Cebi A., Demirtas H., Aslan M. T., Yılmaz O., Kanber B., Kaleli A. R.

Design and additive manufacturing of a fatigue-critical aerospace part using topology optimization and L-PBF process

Dagkolu A., Gokdag I., YILMAZ O.

DESIGN AND VALIDATION OF GRADED POROUS STRUCTURESPRODUCED BY POWDER BED FUSION PROCESS

YILMAZ O., KAŞ M.

AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019

Building strategy effect on mechanical and metallurgical properties of high strength low alloy steel in Wirearc additive manufacturing

Yıldız A. S., YILMAZ O., Koç B.

72nd IIW Annual Assembly and International Conference, Bratislava, Slovakya, 7 - 12 Temmuz 2019

EXPERIMENTAL INVESTIGATION OF OVERHANG ANGLE IN TIG WELDING-BASED SHAPE METAL DEPOSITION PROCESS

EYERCİOĞLU Ö., ATALAY Y., ALADAG M., YILMAZ O.

4th International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2019, Gaziantep, Türkiye, 11 - 14 Nisan 2019, ss.49-56

A SIMULATION OF TEMPERATURE DISTRIBUTION BY SELECTIVE LASER MELTING PROCESS IN ADDITIVE MANUFACTURING

ÖNAL M. B., YILMAZ N. F., YILMAZ O.

INTERNATIONAL CONFERENCE ON WELDING TECHNOLOGIES AND EXHIBITION, Saraybosna, Bosna-Hersek, 26 - 28 Eylül 2018, ss.667-676

Seçici Lazerle Ergitme Yöntemi İle Üretilen Inconel 625 Alaşımlı Parçada Yüzey Bütünlüğünün İncelenmesi

KITAY Ö., TAŞCIOĞLU E., KAŞ M., NESLİ Ş., KAYNAK Y., YILMAZ O.

18th International Conference on Machine Design and Production (UMTIK 2018), 3 - 06 Temmuz 2018

Değişken Akım Değerleri Uygulanarak İş Parçası Malzemesinin Elektrokimyasal İşlenebilirliğinin Tespiti

DEMİRTAŞ H., YILMAZ O., KANBER B.

III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, 21 - 22 Haziran 2018

Katot Malzemesinin Kısa Devre Kontrol Mekanizmasinin Verimi Üzerindeki Etkisinin Deneysel Olarak İncelenmesi

DEMİRTAŞ H., YILMAZ O., KANBER B.

III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, 21 - 22 Haziran 2018

Electroyte Effects on Electrochemical Machining: A Review

DEMİRTAŞ H., YILMAZ O., KANBER B.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCE, 9 - 12 Mayıs 2018

Effect of Feed Rate on Electrochemical Machining Freeform Surface

DEMİRTAŞ H., YILMAZ O., KANBER B.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCE, 9 - 12 Mayıs 2018

Uzay ve Havacılık Alaşımlarının elektriksel Erozyonla Delinmesi İşleminde Yüzey Bütünlüğünün İncelenmesi

YILMAZ O., EKİCİ M., Abbasi T.

The 18th International Conference on Machine Design and Production, 3 - 06 Haziran 2018

Hücresel yapılı tasarımlarda boşluk değerinin belirlenmesine yönelik matematiksel yaklaşım

Dursun A. M., Ünal R., Yılmaz O., Salamci E.

3rd International Congress on 3D printing (Additional Manufacturing) Technologies and Digital Industries, Antalya, Türkiye, 19 - 21 Nisan 2018, ss.660-668