Prof. MURAT TOLGA ÖZKAN

Publication Network

Articles 45

1. Stress concentration factors for bending with symmetric opposite notches in thin beam evaluated by FEM and ANN

Şahin M. İ., Özkan M. T.

MATERIALS TESTING , vol.67, no.11, pp.1897-1913, 2025 (SCI-Expanded, Scopus)

2. FEM and ANN modeling of stress concentration factors (Kt) of circular plates with various circular holes according to internal and external pressures

Cengiz Bulut N. Z., Ozkan M. T., Ozdemir V.

MATERIALPRUEFUNG/MATERIALS TESTING , vol.67, no.10, pp.1591-1612, 2025 (SCI-Expanded, Scopus)

3. Simetrik V Şekilli Plakadaki Gerilme Yığılma Faktörünün Yapay Sinir Ağı ile Modellenmesi

Eren M., TOKTAŞ İ., ÖZKAN M. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.26, no.3, pp.1199-1205, 2023 (ESCI, TRDizin)

4. Meyve Kabuğu tozları Takviyeli Ahşap Plastik Kompozit (APK) Malzemelerin Mekanik Özelliklerinin Belirlenmesi ve I-Tipi Snap-Fit Modeli için Örnek Çalışma

Özkan M. T., Erdemir F.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.26, no.3, pp.1-15, 2023 (ESCI, TRDizin)

5. Estimation of joint torques using an artificial neural network model based on kinematic and anthropometric data

Serbest K., ÖZKAN M. T., Cilli M.

Neural Computing and Applications , vol.35, no.17, pp.12513-12529, 2023 (SCI-Expanded, Scopus)

6. Application Of Taguchi Method For Optimization Of Design Parameters In Enhancement The Robust Of \u201cC\u201d Type Snap-fits

ERDEMİR F., ÖZKAN M. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.25, no.3, pp.1385-1395, 2022 (ESCI, TRDizin)

7. Prediction of Channel Utilization with Artificial Neural Networks Model in Mac Layer in Wireless Local Area Networks

Karakurt H. B., KOÇAK C., ÖZKAN M. T.

WIRELESS PERSONAL COMMUNICATIONS , vol.126, no.4, pp.3389-3418, 2022 (SCI-Expanded, Scopus)

8. Analyze of leaf springs with parametric finite element analysis and artificial neural network

Yavuz S., ÖZKAN M. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.25, pp.827-842, 2022 (ESCI, TRDizin)

9. Determination of theoretical stress concentration factor for circular/elliptical holes with reinforcement using analytical, finite element method and artificial neural network techniques

Özkan M. T., Erdemir F.

NEURAL COMPUTING & APPLICATIONS , vol.33, no.19, pp.12641-12659, 2021 (SCI-Expanded, Scopus)

10. End effector position calculation with the ANN for tapping machine

AKKAŞ G., KORKUT İ., ÖZKAN M. T.

JOURNAL OF ENGINEERING RESEARCH , vol.9, no.3, pp.235-247, 2021 (SCI-Expanded, Scopus) Sustainable Development

11. Estimations of Stress Concentration Factors (Cw/Kts) For Helical Circular/Square Cross Sectional Tension-Compression Springs And Artificial Neural Network Modelling

ÖZKAN M. T., TOKTAŞ İ., Doganay S. K.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.23, no.3, pp.901-908, 2020 (ESCI, TRDizin)

12. Determination of Stress Concentration Factor (Kt) for a Crankshaft under Bending Loading: An Artificial Neural Networks Approach

Toktaş İ., Özkan M. T., Erdemir F., Yuksel N.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.23, no.3, pp.813-819, 2020 (ESCI, TRDizin)

13. Determination of stress concentration factors for shafts under tension

ÖZKAN M. T., Erdemir F.

MATERIALS TESTING , vol.62, no.4, pp.413-421, 2020 (SCI-Expanded, Scopus)

14. Modal Analysis of a Snap-fits Joint Model for Plastic Parts

Erdemir F., ÖZKAN M. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.4, pp.927-933, 2019 (ESCI, TRDizin)

15. Vibration prediction in drilling processes with HSS and carbide drill bit by means of artificial neural networks

ULAŞ H. B., ÖZKAN M. T., Malkoc Y.

NEURAL COMPUTING & APPLICATIONS , vol.31, no.9, pp.5547-5562, 2019 (SCI-Expanded, Scopus)

16. Turning processes investigation of materials austenitic, martensitic and duplex stainless steels and prediction of cutting forces using artificial neural network (ANN) techniques

ULAŞ H. B., ÖZKAN M. T.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , vol.26, no.2, pp.93-104, 2019 (SCI-Expanded, Scopus)

17. Experimental research and ANN modeling on the impact of the ball burnishing process on the mechanical properties of 5083 Al-Mg material

Basak H., ÖZKAN M. T., Toktas I.

KOVOVE MATERIALY-METALLIC MATERIALS , vol.57, no.1, pp.61-74, 2019 (SCI-Expanded, Scopus)

18. Esneyerek Kilitlenen Bağlantı ElemanlarındaTutma/Çözme Kuvvetinin Malzeme Cinsi ve Sürtünme Katsayısına Göre Yapay Sinir Ağları Metodu ile Modellenmesi

ÖZKAN M. T., Erdemir F.

Gazi Mühendislik Bilimleri Dergisi , vol.4, no.3, pp.207-215, 2018 (TRDizin)

19. Performance of coated and uncoated carbide/cermet cutting tools during turning

ULAŞ H. B., BİLGİN M., SEZER H. K., ÖZKAN M. T.

MATERIALS TESTING , vol.60, no.9, pp.893-901, 2018 (SCI-Expanded, Scopus)

20. ANN Modelling for The Buckling Analysis of Medical Titanium Alloys

ÖZKAN M. T., TOKTAŞ İ., ÇETİNDAĞ H. A., KILIÇARSLAN A. E., ÜNVER H. N.

International Journal of Scientific Research in Information Systems and Engineering (IJSRISE) , vol.4, no.1, pp.16-24, 2018 (Peer-Reviewed Journal)

21. ANN ANALYSIS OF TITANIUM ALLOY BEAMS ACCORDING TO BENDING FOR MEDICAL APPLICATIONS

ÇETİNDAĞ H. A., TOKTAŞ İ., ÖZKAN M. T., KILIÇARSLAN A. E., ÜNVER H. N.

International journal of scientific research in information systems and engineering (IJSRISE) , vol.4, no.1, pp.7-15, 2018 (Peer-Reviewed Journal)

22. Eşit miktarda filament kullanımı ile 3 boyutlu baskısı yapılacak ankastre kirişlerin çekme/basma mukavemetine göre kesit geometrilerinin belirlenmesi (Determination of Cross Sectional Geometries of Beams According to Tension and Compression Strength Which are 3D Printed with the Same Amount of Filament)

ÖZKAN M. T., ÇETİNDAĞ H. A., TOKTAŞ İ.

Politeknik Dergisi , vol.21, no.1, pp.213-219, 2018 (TRDizin)

23. Determination of Stress Concentration Factor for an Infinite 3D Solid Plate With A Deep Hyperbolic Groove and ANN Application

KAPLAN H., TOKTAŞ İ., ÖZKAN M. T.

International Journal of Scientific Research in Information Systems and Engineering (IJSRISE) , vol.4, no.1, pp.60-67, 2018 (Peer-Reviewed Journal)

24. Determination of Cross Sectional Geometries of Beams According to Tension and Compression Strength Which are 3D Printed with the Same Amount of Filament

ÖZKAN M. T., Cetindag H. A., Toktas I.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.21, no.1, pp.213-219, 2018 (ESCI, TRDizin)

25. MATHEMATICAL MODELLING AND ANALYSIS OF CARTRIDGEPROPORTIONAL VALVE

GÜNAY M. B., ÖZKAN M. T.

GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES , vol.4, no.11, pp.38-47, 2017 (Peer-Reviewed Journal)

26. 3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Eşit Miktarda Filament Kullanımı İle Eğilme Mukavemetine Göre Kesit Geometrisi Optimizasyonu

ÇETİNDAĞ H. A., TOKTAŞ İ., ÖZKAN M. T.

Duzce University Journal of Science Technolog , vol.5, no.2, pp.466-477, 2017 (TRDizin)

27. Park-Bahçe Aydınlatma Armatürleri için Yeni Bir Soğutucu GövdeTasarımı ve Analizi

ÖZKAN M. T., emre y., mehmet k.

Gazi Mühendislik Bilimleri Dergisi , vol.3, no.1, pp.1-10, 2017 (TRDizin)

28. Burkulma Mukavemetine Göre Eşit Miktarda Filament Kullanımı İle 3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Kesit Geometri Biçimlerinin Performansı

TOKTAŞ İ., ÖZKAN M. T., Çetindağ H. A.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.5, no.4, pp.169-177, 2017 (TRDizin)

29. Determination of the stress concentration factor (K-t) in a rectangular plate with a hole under tensile stress using different methods

ÖZKAN M. T., TOKTAŞ İ.

MATERIALS TESTING , vol.58, no.10, pp.839-847, 2016 (SCI-Expanded, Scopus)

30. Elipsel Delikli Plakalarda Oluşan Gerilmelerin Tanımlanması ve Yapay Sinir Ağları ile Tahmini

ÖZKAN M. T., KAYGISIZ M.

Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , vol.4, no.3, pp.135-145, 2016 (TRDizin)

31. Comparison with different models of bending stress analysis of the cantilever beams under different profile section materials and loads

ÖZKAN M. T.

Social GAU Journal Applied Sciences , vol.7, no.11, pp.173-182, 2015 (Peer-Reviewed Journal)

32. Comparison with different models of tensile and compressive stress analysis on a cantilever beam model

ÖZKAN M. T.

Social GAU Journal Applied Sciences , vol.7, no.11, pp.183-194, 2015 (Peer-Reviewed Journal)

33. Surface roughness during the turning process of a 50CrV4 (SAE 6150) steel and ANN based modeling

ÖZKAN M. T.

MATERIALS TESTING , vol.57, no.10, pp.889-896, 2015 (SCI-Expanded, Scopus)

34. EXPERIMENTAL DESIGN AND ARTIFICIAL NEURAL NETWORK MODEL FOR TURNING THE 50CrV4 (SAE 6150) ALLOY USING COATED CARBIDE/CERMET CUTTING TOOLS

ÖZKAN M. T., ULAŞ H. B., BİLGİN M.

MATERIALI IN TEHNOLOGIJE , vol.48, no.2, pp.227-236, 2014 (SCI-Expanded, Scopus)

35. DETERMINATION OF THE NOTCH FACTOR FOR SHAFTS UNDER TORSIONAL STRESS WITH ARTIFICIAL NEURAL NETWORKS

ÖZKAN M. T., ELDEM C., ŞAHİN İ.

MATERIALI IN TEHNOLOGIJE , vol.48, no.1, pp.81-90, 2014 (SCI-Expanded, Scopus)

36. Experimental and artificial neural network study of heat formation values of drilling and boring operations on Al 7075 T6 workpiece

ÖZKAN M. T.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , vol.20, no.4, pp.259-268, 2013 (SCI-Expanded, Scopus)

37. Mekanizma Tekniği Dersi İçin Uzaktan Eğitim Modülünün Hazırlanması ve Uygulanması

ÖZKAN M. T.

NEWWSA , vol.7, no.2, pp.1-16, 2013 (Peer-Reviewed Journal)

38. Eğilme Gerilmesi Etkisindeki Millerin Çentik Faktörünün Yapay Sinir Ağları İle Belirlenmesi

ÖZKAN M. T., ELDEM C., KÖKSAL E.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , vol.19, no.1, pp.24-32, 2013 (Peer-Reviewed Journal)

39. Çekme Gerilmesi Etkisindeki Millerin Çentik Faktörünün Yapay Sinir Ağları İle Belirlenmesi

KÖKSAL E., ÖZKAN M. T., ELDEM C.

Erciyes Üniversitesi Mühendislik Fakültesi Dergisi , vol.29, no.1, pp.81-89, 2013 (Peer-Reviewed Journal)

40. Notch sensitivity factor calculationin the design of shafts using artificial neural network system

ÖZKAN M. T.

Education Science and Technology Part A: Energy Science and Research , vol.30, no.1, pp.621-630, 2012 (Peer-Reviewed Journal)

41. Bilgisayar Destekli Helisel Yay Tasarımı ve Sonlu Elemanlar Analizi

ÖZKAN M. T., DÜNDAR K., GÜMÜŞ F.

TUBAV Bilim Dergisi , vol.2, no.2, pp.199-210, 2009 (Peer-Reviewed Journal)

42. Civatalı Bağlantıların Eleman Direngenliğinin Sonlu Elemanlar Yöntemi ve Yapay Sinir Ağları Sistemi ile Belirlenmesi

ÖZKAN M. T., DÜNDAR K.

TEKNOLOJİ Z.K.Ü. Teknik Eğitim Fakültesi Dergisi , vol.1, no.8, pp.33-41, 2005 (Peer-Reviewed Journal)

43. The selection of bolts and gears through expert system approach Uzman sistem yaklaşmi ile civata ve dişli çark seçimi

ÖZKAN M. T., Gülesin M.

Turkish Journal of Engineering and Environmental Sciences , vol.25, no.3, pp.169-177, 2001 (Scopus, TRDizin)

44. Bilgisayar Yardımı ile Konik Dişli Çark Tasarımı Güvenirlik Analizi ve Optimizasyonu

ÖZKAN M. T., ELDEM C.

TEKNOLOJİ Z.K.Ü. Teknik Eğitim Fakültesi Dergisi , vol.2, no.12, pp.105-113, 1999 (Peer-Reviewed Journal)

45. Perçinlerin Mukavemet Analizi ve Optimizasyonu

DÜNDAR K., ÖZKAN M. T.

G.Ü.T.E.F. Dergisi , vol.4, no.4, pp.131-137, 1996 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences 42

1. HELIX GEAR STATIC AND DYNAMICS ANALISYSISUSING PARAMETRIC FINITE ELEMENT METHODAND MODELLING WITH ARTIFICIAL NEURALNETWORKS

Özkan M. T., Özden V. D.

16TH INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE, AND MATHEMATICAL SCIENCES, İstanbul, Turkey, 28 February - 29 March 2024, (Full Text)

2. AIRCRAFT LANDING GEAR ACCESS DOOR SIZINGAND OPTIMIZATION

Özkan M. T., Uludağ S.

16TH INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE, AND MATHEMATICAL SCIENCES, İstanbul, Turkey, 28 February 2024, pp.384-392, (Full Text)

3. Merkezi Delikli Dört Katmanlı Bir Kompozit PLakada Oluşan Flambaj Zorlanmasının Sonlu Elemenlar Yöntemi ile Belirlenmesi

ÖZKAN M. T., ZOP A.

Ases Uluslararası Fırat Bilimsel Araştırmalar Kongresi, Elazığ, Turkey, 17 - 19 November 2023, (Full Text)

4. Karbon Fiber Karbon Takviyeli Kompozin Özdeğer Burkulma Analizi

ÖZKAN M. T., GÖKSU F. L.

3rd International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 13 - 17 January 2023, (Full Text)

5. Grafit Tozu Kullanarak SLA 3B Yazıcı ile Isı yayıcı Üretimi

Sincer A., ÖZKAN M. T.

4. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmalar Kongresi (UMUH BİLMES 2021), Tokat, Turkey, 23 December 2021, vol.4, pp.27-35, (Full Text)

6. Artificial Neural Networks in Design Engineering and Science

ÖZKAN M. T.

2021 6th International Conference on Modern Machinery Manufacturing and Materials Engineering （IC4ME 2021）, Chongqing, China, 26 - 28 November 2021, (Full Text)

7. Farklı Malzemelerden Üretilmiş I- Tipi Tırnak Bağlantılarında Oluşan Gerilmelerin Taguchi Metodu ile Optimizasyonu ve Sonlu Elemanlar Yöntemiyle Modellenmesi

ÖZKAN M. T., Erdemir F.

ISIDE 2018, Antalya, Turkey, 22 - 24 November 2018, pp.587-594, (Full Text)

8. Belleville Tipi Yayların Kuvvet-Deplasman Özellik-lerinin Yay Boyutlarına Göre Yapay Sinir Ağları (YSA) ile Modellenmesi

ÖZKAN M. T., Kuran M.

ISIDE 2018, Antalya, Turkey, 22 - 24 November 2018, pp.573-579, (Full Text)

9. Esneyerek Kilitlenen Bağlantı Tasarımında Modal Analiz

ÖZKAN M. T., Erdemir F.

ISIDE 2018, Antalya, Turkey, 22 - 24 November 2018, pp.580-586, (Full Text)

10. Tırnaklı Birleştirmelerde Sıkma/Çözme Kuvvetinin Malzeme Türü ve Sürtünme Katsayısına Göre Yapay Sinir Ağları Metodu ile Modellenmesi

ÖZKAN M. T., Erdemir F.

ISIDE 2018, Antalya, Turkey, 22 - 24 November 2018, pp.595-603, (Full Text)

11. ANN model of the medical ceramic beams which were subjected to tension/compression stress

TOKTAŞ İ., ÇETİNDAĞ H. A., ÖZKAN M. T., ÜNVER H. N., KILIÇARSLAN A. E.

ISEAIA 2017 5ND International Symposium on Engineering, Artificial Intelligence Applications (İkinci Uluslararası Mühendislik, Yapay Zekâ ve Uygulamaları Sempozyumu), Girne, Cyprus (Kktc), 1 - 03 November 2017, pp.39-48, (Full Text)

12. ANN modelling for the buckling analysis of medical titanium alloys

ÖZKAN M. T., TOKTAŞ İ., ÇETİNDAĞ H. A., KILIÇARSLAN A. E., ÜNVER H. N.

13. Artificial neural networks model for estimation of stress concentration for a flat tension bar with opposite V-shaped notches

EREN M., ÖZKAN M. T., TOKTAŞ İ.

14. ANN analysis of titanium alloy beams according to bending for medical applications

ÇETİNDAĞ H. A., ÖZKAN M. T., TOKTAŞ İ., KILIÇARSLAN A. E., ÜNVER H. N.

15. Determination of Stress concentration factor for an infinite 3D solid plate with a deep hyperbolic groove and ANN application

KAPLAN H., TOKTAŞ İ., ÖZKAN M. T.

16. Determination of Cross Sectional Geometrıes of Beams According to Tension and Compression Strength Which 3D Printed With the Same Amount of Filament (Eşit Miktarda Filament Kullanımı İle 3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Çek-me/Basma Mukavemetine Göre Kesit Geometrilerinin Belirlenmesi)

ÖZKAN M. T., ÇETİNDAĞ H. A., TOKTAŞ İ.

2nd INTERNATIONAL SYMPOSIUM OF 3 D PRINTING TECHNOLOGIES, İstanbul, Turkey, 3 - 04 April 2017, pp.38-47, (Full Text)

17. Optimization Of Cross Sectional Geometry Of 3D Printed Beams According To Pure Bending Strength With The Same Amount Of Filament (3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Eşit Miktarda Filament Kullanımı İle Eğilme Mukavemetine Göre Kesit Geometrisi Optimizasyonu)

ÇETİNDAĞ H. A., TOKTAŞ İ., ÖZKAN M. T.

The 2nd International Symposium On 3d Printing Technologies (3D-PTS2017), İstanbul, Turkey, 3 - 04 April 2017, pp.63-72, (Full Text)

18. Determination of Cross Sectional Geometries of Beams According to Tension and Compression Strength Which 3D Printed With the Same Amount of Filament (Eşit Miktarda Filament Kullanımı İle 3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Çekme/Basma Mukavemetine Göre Kesit Geometrilerinin Belirlenmesi)

ÖZKAN M. T., ÇETİNDAĞ H. A., TOKTAŞ İ.

The 2nd International Symposium On 3d Printing Technologies (3D-PTS2017), İstanbul, Turkey, 3 - 04 April 2017, pp.38-47, (Full Text)

19. Performance Of Cross Sectional Geometries Of Beams According To Buckling Strength Which Are 3D Printed With The Same Amount Of Filament (Burkulma Mukavemetine Göre Eşit Miktarda Filament Kullanımı İle 3 Boyutlu Baskısı Yapılacak Ankastre Kirişlerin Kesit Geometri Biçimlerinin Performansı)

TOKTAŞ İ., ÖZKAN M. T., ÇETİNDAĞ H. A.

The 2nd International Symposium On 3d Printing Technologies (3D-PTS2017), İstanbul, Turkey, 3 - 04 April 2017, pp.81-89, (Full Text)

20. Dimensioning of 4 Bar Mechanisms Using Artificial Neural Network Method

ÖZKAN M. T., TOKTAŞ İ., KAYGISIZ M.

The Fourth International Symposium on Engineering,Artificial Intelligence and Applications (ISEAIA 2016), Girne, Cyprus (Kktc), 2 - 04 November 2016, pp.127-139, (Full Text)

21. Dişli Kayış Kasnak Mekanizmasında Farklı Temas Açılarının Dişli Kasnağı Üzerindeki Etkilerinin ANSYS ile Analizi

ÖZKAN M. T., TOKTAŞ İ., DEMİRHAN H.

4TH INTERNATIONAL SYMPOSIUM ON INNOVATIVE TECHNOLOGIES IN ENGINEERING AND SCIENCEWome Deluxe Hotel Alanya/Antalya TURKEY 3-5 NOV 2016, ANTALYA, ALANYA, Turkey, 3 - 05 November 2016, pp.593-599, (Full Text)

22. Dimensioning of Slider Crank Mechanisms Using Artificial Neural Network Method

ÖZKAN M. T., TOKTAŞ İ., KAYGISIZ M.

The Fourth International Symposium on Engineering,Artificial Intelligence and Applications (ISEAIA 2016), Girne, Cyprus (Kktc), 2 - 04 November 2016, pp.116-126, (Full Text)

23. Femur Kemiginin Farklı Elastikiyet Modülü, Eğilme Momenti ve Burulma Momenti Degerleri Altında Statik Analizi. (Static Analysis of Femur Bone under the Different Modulus of Elasticity, Bending and Torsional Moments)

ÖZKAN M. T., TOKTAŞ İ., DEMİR E., Tokdede A. S.

20. Biyomedikal Muhendisligi Ulusal Toplantısı, İzmir, Turkey, 3 - 05 November 2016, pp.447-452, (Full Text)

24. The Modeling of 3D Tibia Bone Using the CT Images and Printing

AKTAŞ G. R., Erbaş M. K., Şanver S., DEMİR E., TOKTAŞ İ., ÖZKAN M. T.

ISITES 2016 4TH International Symposium On Innovative Technologıes in Engineering And Science, Alanya/Antalya, Turkey, 3 - 04 November 2016, pp.908-913, (Full Text)

25. Definition of stress concentration factor of column with angled holed under bending stress using finite element analysis

ÖZKAN M. T., Kaygisiz M., Toktas I.

21st International Scientific Conference MECHANIKA 2016, Kaunas, Lithuania, 12 - 13 May 2016, pp.199-205, (Full Text)

26. Static Analysis of Femur Bone under the Different Modulus of Elasticity, Bending and Torsional Moments

ÖZKAN M. T., TOKTAŞ İ., Demir E., Tokdede A. S.

20th National Biomedical Engineering Meeting (BIYOMUT), İzmir, Turkey, 3 - 05 November 2016, (Full Text)

27. Multiparametric analysis of femur bone under compression stress with finite elements method

Demir E., Yildiz M., Toktas I., ÖZKAN M. T.

21st International Scientific Conference MECHANIKA 2016, Kaunas, Lithuania, 12 - 13 May 2016, pp.73-76, (Full Text)

28. Definition of stress concentration factor for column with angled hole under tensile stress using finite element analysis

ÖZKAN M. T., Kaygisiz M., Toktas I.

21st International Scientific Conference MECHANIKA 2016, Kaunas, Lithuania, 12 - 13 May 2016, pp.206-211, (Full Text)

29. Comparison with Analitical and Finite Element Analysis of Humerus Bone With Different Implant Hole Diameters Under Combined Stress

DEMİR E., TİRYAKİ G., TOKTAŞ İ., ÖZKAN M. T.

BIOENG’15 II. International Bioengineering Conference, İstanbul, Turkey, 27 November 2015, pp.70-79, (Full Text)

30. Comparison with Analytical and Finite Element Analysis Results via Tension Test in Humerus Bone

TOKTAŞ İ., ÖZKAN M. T., DEMİR E., TİRYAKİ G.

BIOENG ’15 II. International Bioengineering Conference, İstanbul, Turkey, 27 November 2015, pp.124-132, (Full Text)

31. Finite Element Investigation on the Notch Sensitivity of Casttellated Beams under Bending Stress

ÖZKAN M. T., TOKTAŞ İ., Türkücü T.

ISITES 2015 3nd International Symposium on Innovative Technologies in Engineering and Science, Valencia, Spain, 3 - 05 June 2015, pp.1434-1445, (Full Text)

32. Finite Element Investigation of Castellated Sigma Profiles Under Torsional Stress

ÖZKAN M. T., TOKTAŞ İ., SERKAN İ.

3RD INTERNATIONAL SYMPOSIUM ON INNOVATIVE TECHNOLOGIES IN ENGINEERING AND SCIENCE, Spain, 3 - 05 June 2015, (Full Text)

33. Modal Analysis of Humerus Bone Fracture With Fixed-Fixed Boundary Condition Based on Finite Element Analysis

KURT P., TOKTAŞ İ., ÖZKAN M. T.

ISITES 2015, (3nd International Symposium on Innovative Technologies in Engineering and Science), Valencia, Spain, 3 - 05 June 2015, pp.2556-2562, (Full Text)