Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

A novel approach for enhancing the mechanical behavior of additively manufactured metal matrix composite structures: Preliminary investigation

Yalcin H., Abdelmoula M., KAYA D., KÜÇÜKTÜRK G., Pul M.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , 2024 (SCI-Expanded) identifier identifier

Electrodeposition of Zn/TiO2 coatings on Ti6Al4V produced by selective laser melting, the characterization and corrosion resistance

Gündüz D. Ö., KÜÇÜKTÜRK G., Pul M., Salunkhe S. S., KAYA D., Kabalcı M., et al.
Materials Research Express , cilt.11, sa.6, 2024 (SCI-Expanded) Creative Commons License identifier identifier

Enhancing powder bed fusion of alumina ceramic material: a comprehensive study from powder tailoring to mechanical performance evaluation

Abdelmoula M., KÜÇÜKTÜRK G., Juste E., Petit F.
International Journal of Advanced Manufacturing Technology , cilt.131, sa.3-4, ss.1745-1767, 2024 (SCI-Expanded) identifier identifier

Direct selective laser sintering of silicon carbide: Realizing the full potential through process parameter optimization

Abdelmoula M., KÜÇÜKTÜRK G., Grossin D., Zarazaga A. M., Maury F., Ferrato M.
Ceramics International , cilt.49, sa.20, ss.32426-32439, 2023 (SCI-Expanded) identifier identifier

Experimental and Analytical Investigation of the Re-Melting Effect in the Manufacturing of 316L by Direct Energy Deposition (DED) Method

Kahya H., GÜRÜN H., KÜÇÜKTÜRK G.
Metals , cilt.13, sa.6, 2023 (SCI-Expanded) Creative Commons License identifier identifier

A Novel Approach for Powder Bed Fusion of Ceramics Using Two Laser Systems

Kaya D., Abdelmoula M., Kucukturk G., Grossin D., Stamboulis A.
MATERIALS , cilt.16, sa.6, 2023 (SCI-Expanded) identifier identifier identifier

Investigation of the effect of lubricant properties of carbon nanomaterial in Cu/MWCNT composites on wear

Pul M., Yilmazel R., Erten M. Y., KÜÇÜKTÜRK G., KAYA D., Salunkhe S. S., et al.
FRONTIERS IN MATERIALS , cilt.10, 2023 (SCI-Expanded) identifier identifier

Machinability of B4C-reinforced Al2014 metal matrix composites in electric discharge machining

Ahmadinia O. F., KÜÇÜKTÜRK G., Sucularli F., GÜRÜN H.
REVISTA DE METALURGIA , cilt.58, sa.4, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Selection of Constitutive Material Model for the Finite Element Simulation of Pressure-Assisted Single-Point Incremental Forming

Hassan A. A., KÜÇÜKTÜRK G., Yazgin H. V., GÜRÜN H., KAYA D.
MACHINES , cilt.10, sa.10, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Improvement of incremental sheet metal forming with the help of a pressurised fluid system

KÜÇÜKTÜRK G., Yazgin H. V.
MATERIALS TESTING , cilt.64, sa.8, ss.1214-1222, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Multi-Layer Simulation of the Powder Bed Selective Laser Processing of Alumina for Residual Stress and Distortion Evaluation

Abdelmoula M., KÜÇÜKTÜRK G.
MATERIALS , cilt.15, sa.10, 2022 (SCI-Expanded) Creative Commons License identifier identifier identifier

Numerical and experimental study for electron beam welding process of Al6061-T6 material

KÜÇÜKTÜRK G., Atkaya M.
MATERIALS RESEARCH EXPRESS , cilt.9, sa.4, 2022 (SCI-Expanded) identifier identifier

EVALUATION OF THE EFFECTS OF LOCAL HEATING ON SPRINGBACK BEHAVIOUR FOR AHSS DOCOL 1400 SHEET METAL

KÜÇÜKTÜRK G., Tahta M., GÜRÜN H., KARAAĞAÇ İ.
TRANSACTIONS OF FAMENA , cilt.46, sa.3, ss.51-62, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Scanning Strategy Investigation for Direct Powder Bed Selective Laser Processing of Silicon Carbide Ceramic

Abdelmoula M., Zarazaga A. M., Kucukturk G., Maury F., Grossin D., Ferrato M.
Applied Sciences (Switzerland) , cilt.12, sa.2, 2022 (SCI-Expanded) identifier identifier

INVESTIGATING THE EFFECT OF ELECTRON BEAM MELTING PARAMETERS ON THE Ti6A14V ALLOY: A SIMULATION STUDY

KÜÇÜKTÜRK G., Akillilar H.
Transactions of Famena , cilt.46, sa.4, ss.45-58, 2022 (SCI-Expanded) identifier identifier

Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation

Abdelmoula M., KÜÇÜKTÜRK G., Juste E., Petit F.
APPLIED SCIENCES-BASEL , cilt.12, sa.2, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Experimental and numerical study for direct powder bed selective laser processing (sintering/melting) of silicon carbide ceramic

Monton A., Abdelmoula M., KÜÇÜKTÜRK G., Maury F., Grossin D., Ferrato M.
MATERIALS RESEARCH EXPRESS , cilt.8, sa.4, 2021 (SCI-Expanded) identifier identifier

The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes

Xu Z., Dunleavey J., Antar M., Hood R., Soo S. L., Kucukturk G., et al.
International Journal of Fatigue , cilt.111, ss.196-207, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding

Rona N., YENİSEY M., KÜÇÜKTÜRK G., GÜRÜN H., ÇOĞUN C., ESEN Z.
JOURNAL OF PROSTHODONTIC RESEARCH , cilt.61, sa.2, ss.158-167, 2017 (SCI-Expanded) identifier identifier identifier

Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration

ÇALIN R., PUL M., BİCAN O., KÜÇÜKTÜRK G.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.24, sa.1, ss.149-153, 2017 (SCI-Expanded) identifier identifier

The effect of minimum quantity lubrication under different parameters in the turning of AA7075 and AA2024 aluminium alloys

Cakir A., YAĞMUR S., Kavak N., KÜÇÜKTÜRK G., Seker U.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.84, ss.2515-2521, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Experimental investigation of the effects of clearance on product quality in AA5754 sheet material blanking process and estimation by fuzzy logic AA5754 Malzemenin kesme işlemlerinde kesme boşluǧunun ürün kalitesine etkilerinin deneysel incelenmesi ve bulanik mantik ile tahmini

Kucukturk G.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.31, sa.2, ss.285-294, 2016 (SCI-Expanded) Creative Commons License identifier identifier

Modeling and analyzing the effects of experimentally determined torque and thrust force on cutting tool according to drilling parameters

KÜÇÜKTÜRK G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.227, sa.B1, ss.84-95, 2013 (SCI-Expanded) identifier identifier

An Investigation of Thermal Properties of Zirconia Coating on Aluminum

URTEKİN L., KÜÇÜKTÜRK G., KARAÇAY T., USLAN İ., SALMAN S.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.37, sa.8, ss.2323-2332, 2012 (SCI-Expanded) identifier identifier

GEOMETRICAL APPROACH FOR REDUCTION OF TOOL SHAPE DEGENERATION IN ELECTRIC DISCHARGE MACHINING (EDM)

Cogun C., Deniz T. C., KÜÇÜKTÜRK G.
MACHINING SCIENCE AND TECHNOLOGY , cilt.16, sa.3, ss.445-458, 2012 (SCI-Expanded) identifier identifier

Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method

Pul M., KÜÇÜKTÜRK G., Calin R., Seker U.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.225, ss.84-90, 2011 (SCI-Expanded) identifier identifier

A NEW METHOD FOR MACHINING OF ELECTRICALLY NONCONDUCTIVE WORKPIECES USING ELECTRIC DISCHARGE MACHINING TECHNIQUE

KÜÇÜKTÜRK G., Cogun C.
MACHINING SCIENCE AND TECHNOLOGY , cilt.14, sa.2, ss.189-207, 2010 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Process parameters investigation for direct powder bed selective laser processing of silicon carbide parts

Zarazaga A. M., Abdelmoula M., KÜÇÜKTÜRK G., Maury F., Ferrato M., Grossin D.
PROGRESS IN ADDITIVE MANUFACTURING , cilt.7, sa.6, ss.1307-1322, 2022 (ESCI) identifier identifier

Experimental Optimization of Drilling Parameters in Tooling for Euro 7 Nozzle Production

KÜÇÜKTÜRK H., KÜÇÜKTÜRK G., YAVAŞ Ç., KATMER Ş., ŞEKER U.
International Journal of Automotive Science And Technology , cilt.5, sa.3, ss.254-265, 2021 (Hakemli Dergi) identifier

AA7075 Matrisli B4C+SiC Takviyeli Hibrit Kompozitlerin Toz Takviyeli EEİ Yöntemiyle İşlenmesinde Boşalım Akımı ve Takviye Oranının İşlenmiş Yüzeyin Mikroyapısı ve Pürüzlülüğüne Etkisi

KESKİN G., KÜÇÜKTÜRK G., PUL M., GÜRÜN H., BAYDAROĞLU V.
Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.13, sa.2, ss.489-495, 2021 (Hakemli Dergi)

Design and Analysis of Lightweight Automotive Component for Turbocharger Units

TÜZEMEN M. Ç., AĞAOĞLU M., KARAKAYA M., SALAMCİ E., KÜÇÜKTÜRK G.
Manufacturing Science and Technology , cilt.3, sa.5, ss.278-285, 2015 (Hakemli Dergi) Creative Commons License

ELEKTRO EROZYON İLE İŞLEMEDE ELEKTRİK İLETKEN OLMAYAN İŞ PARÇALARININ İŞLENMESİ İÇİN YENİ BİR YÖNTEM GELİŞTİRİLMESİ

KÜÇÜKTÜRK G., ÇOĞUN C.
MÜHENDIS VE MAKINA , cilt.50, sa.594, ss.8-13, 2009 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Effect of Circular Tool Shoulder End Features on Mechanical Properties of Friction Stir Welded Aluminum 6061 Alloy

Arıbal T., Kaya D., Küçüktürk G.
International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 27 Ekim 2022, ss.6-11

EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF PROCESS PARAMETERS ON SURFACE QUALITY AND DIMENSIONAL ACCURACY IN MACHINING OF AISI D2 TOOL STEEL BY EDM

KARADAĞ E., GÜRÜN H., DİLİPAK H., KÜÇÜKTÜRK G., GÜRKAN D.
8th INTERNATIONAL MARDIN ARTUKLU SCIENTIFIC RESEARCHES CONFERENCE, Mardin, Türkiye, 04 Haziran 2022, ss.920-930

Study the Effects of Electron Beam Welding Process Parameters on Thick Al6061 T6 Material

KÜÇÜKTÜRK G., ATKAYA M.
International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 02 Ekim 2020, ss.22-28 Creative Commons License

A Review on Using of Directed Energy Deposition (DED) in Manufacturing Processes

KAHYA H., KÜÇÜKTÜRK G., Mohamed H., GÜRÜN H.
International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 02 Ekim 2020 Creative Commons License

Docol 1400 Sac Malzemesinin Şekillendirilebilirlik ve Geri Esneme Davranışlarının İncelenmesi

Tahta M., Küçüktürk G., Gürün H., Karaağaç I.
3. International Scientific and Vocational Studies Congress-Engineering, Nevşehir, Türkiye, 27 - 29 Haziran 2019, ss.402-407 Creative Commons License

DP600 ve DP1000 Çift Fazlı Çelik Malzemelerin U-bükme İşleminde Geri Esnemenin Azaltılması

YILDIRIM S., GÜRÜN H., DİLİPAK H., KÜÇÜKTÜRK G., ERSÖZ C.
3. International Scientific and Vocational Studies Congress-Engineering, Nevşehir, Türkiye, 27 - 29 Haziran 2019

DP600 ve DP1000 Çift Fazlı Çelik Malzemelerin U-Bükmede Köşe Ezme İşleminin Geri Esnemeye Etkisi

Yildirim S., Gürün H., Dilipak H., Küçüktürk G., Ersöz C.
1. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmaları Kongresi, Nevşehir, Türkiye, 27 - 29 Haziran 2019, ss.21-25 Creative Commons License

Investigation of the Formability of DP600 Dual Phase Sheet Material by Fluid Pressure Assisted Single Point Incremental Forming Method

GÜRÜN H., ÇAVUŞOĞLU O., KÜÇÜKTÜRK G., ÇETİNKAYA O.
UDCS’xx19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019

Investigation of the Formability of Al6061 Aluminum Sheet Material by Fluid Pressure Assisted Single Point Incremental Forming Method

GÜRÜN H., ÇAVUŞOĞLU O., KÜÇÜKTÜRK G., ÇETİNKAYA O.
4th International Conference on Engineering Technology and Applied Sciences, KİEV, Ukrayna, 24 - 28 Nisan 2019

Effects Of Process Parameters In The Machining of AA 7075 Alloy Reinforced with B4C Composite by Powder-Mixed Electrical Discharge Machining

KÜÇÜKTÜRK G., KESKİN G., PUL M., BAYDAROĞLU V., GÜRÜN H.
ICELIS, 11 - 14 Nisan 2019

An Investigation of Material Removal Rate and Tool Wear Rate in Powder Mixed EDM Machining Process of Al2014 Alloy Reinforced with B4C Composites

Küçüktürk G., Şeker U., Joudı J., Kaya D., Ahmadınıa O. F., Çalın R.
The 18th International Conference on Machine Design and Production, Eskişehir, Türkiye, 3 - 06 Temmuz 2018

Experimental Investigation of Machining Characteristics for Al2014 Alloy Reinforced with TiB2 Composites in Powder-Mixed EDM

KÜÇÜKTÜRK G., JOUDI J., ÇALIN R., ŞEKER U., GÜRÜN H., AHMADINIA O. F.
18th INTERNATIONAL CONFERENCEONMACHINE DESIGN AND PRODUCTION, 3 - 06 Temmuz 2018

MACHINABILITY OF MICRO DEEP HOLE FOR Ti6Al4V ELI AND AISI 316L STAINLESS STEEL USING EDM

BAVIL A. K., KÜÇÜKTÜRK G., ÖZERKAN H. B.
7th INTERNATIONAL SYMPOSIUM ON MACHINING, 3 - 05 Kasım 2016, ss.460-471

An Experimental Study Of The EffectOf Abrasive Water Jet And Laser Beam On The Surface Integrity

Kaya D., Küçüktürk G., Özerkan H. B.
The9th International Symposium Kod 2016 Machine And Industrial Design InMechanical Engineering, Veszprém, Macaristan, 9 - 12 Temmuz 2016, ss.217-220

COMPUTER-AIDED STRIP LAYOUT FOR PIERCING AND CUTTING DIES

ÇAVUŞOĞLU O., KÜÇÜKTÜRK G.
The Ninth International SymposiumKOD 2016 Machine and Industrial Design in Mechanical Engineering, 9 - 12 Haziran 2016

Wear Properties of In Situ Aluminum Matrix Composite Reinforced with Al2O3

ERARSLAN Y., KELEŞOĞLU E., KÜÇÜKTÜRK G.
Materials Science and Technology ( MS&T ), Houston, Texas, Amerika Birleşik Devletleri, 17 - 21 Ekim 2010, ss.2182-2189

Wear properties of in-situ aluminum matrix composite reinforced with Al2O3

ERARSLAN Y., Kelesoglu E., KÜÇÜKTÜRK G.
Materials Science and Technology Conference and Exhibition 2010, MS and T'10, Houston, TX, Amerika Birleşik Devletleri, 17 - 21 Ekim 2010, cilt.3, ss.2182-2188 identifier
Metrikler

Yayın

51

Atıf (WoS)

225

H-İndeks (WoS)

9

Atıf (Scopus)

284

H-İndeks (Scopus)

9

Atıf (Scholar)

293

H-İndeks (Scholar)

7

Proje

11

Fikri Mülkiyet

1

Tez Danışmanlığı

14

Açık Erişim

21
BM Sürdürülebilir Kalkınma Amaçları