Prof. Dr. GÖKHAN KÜÇÜKTÜRK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Optimization of PMEDM process parameters for B4C and B4C+SiC reinforced AA7075 composites

Keskin G., Salunkhe S. S., Küçüktürk G., Pul M., Gürün H., Baydaroğlu V.

Journal of Engineering Research (Kuwait) , cilt.13, sa.1, ss.47-56, 2025 (SCI-Expanded)

A novel approach for enhancing the mechanical behavior of additively manufactured metal matrix composite structures: Preliminary investigation

Yalcin H., Abdelmoula M., KAYA D., KÜÇÜKTÜRK G., Pul M.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.239, sa.1, ss.103-116, 2025 (SCI-Expanded)

Electrodeposition of Zn/TiO2 coatings on Ti6Al4V produced by selective laser melting, the characterization and corrosion resistance

Gündüz D. Ö., KÜÇÜKTÜRK G., Pul M., Salunkhe S. S., KAYA D., Kabalcı M., et al.

Materials Research Express , cilt.11, sa.6, 2024 (SCI-Expanded)

Enhancing powder bed fusion of alumina ceramic material: a comprehensive study from powder tailoring to mechanical performance evaluation

Abdelmoula M., KÜÇÜKTÜRK G., Juste E., Petit F.

International Journal of Advanced Manufacturing Technology , cilt.131, sa.3-4, ss.1745-1767, 2024 (SCI-Expanded)

Direct selective laser sintering of silicon carbide: Realizing the full potential through process parameter optimization

Abdelmoula M., KÜÇÜKTÜRK G., Grossin D., Zarazaga A. M., Maury F., Ferrato M.

Ceramics International , cilt.49, sa.20, ss.32426-32439, 2023 (SCI-Expanded)

Experimental and Analytical Investigation of the Re-Melting Effect in the Manufacturing of 316L by Direct Energy Deposition (DED) Method

Kahya H., GÜRÜN H., KÜÇÜKTÜRK G.

Metals , cilt.13, sa.6, 2023 (SCI-Expanded)

A Novel Approach for Powder Bed Fusion of Ceramics Using Two Laser Systems

Kaya D., Abdelmoula M., Kucukturk G., Grossin D., Stamboulis A.

MATERIALS , cilt.16, sa.6, 2023 (SCI-Expanded)

Investigation of the effect of lubricant properties of carbon nanomaterial in Cu/MWCNT composites on wear

Pul M., Yilmazel R., Erten M. Y., KÜÇÜKTÜRK G., KAYA D., Salunkhe S. S., et al.

FRONTIERS IN MATERIALS , cilt.10, 2023 (SCI-Expanded)

Selection of Constitutive Material Model for the Finite Element Simulation of Pressure-Assisted Single-Point Incremental Forming

Hassan A. A., KÜÇÜKTÜRK G., Yazgin H. V., GÜRÜN H., KAYA D.

MACHINES , cilt.10, sa.10, 2022 (SCI-Expanded)

Machinability of B4C-reinforced Al2014 metal matrix composites in electric discharge machining

Ahmadinia O. F., KÜÇÜKTÜRK G., Sucularli F., GÜRÜN H.

REVISTA DE METALURGIA , cilt.58, sa.4, 2022 (SCI-Expanded)

Improvement of incremental sheet metal forming with the help of a pressurised fluid system

KÜÇÜKTÜRK G., Yazgin H. V.

MATERIALS TESTING , cilt.64, sa.8, ss.1214-1222, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Multi-Layer Simulation of the Powder Bed Selective Laser Processing of Alumina for Residual Stress and Distortion Evaluation

Abdelmoula M., KÜÇÜKTÜRK G.

MATERIALS , cilt.15, sa.10, 2022 (SCI-Expanded)

Numerical and experimental study for electron beam welding process of Al6061-T6 material

KÜÇÜKTÜRK G., Atkaya M.

MATERIALS RESEARCH EXPRESS , cilt.9, sa.4, 2022 (SCI-Expanded)

EVALUATION OF THE EFFECTS OF LOCAL HEATING ON SPRINGBACK BEHAVIOUR FOR AHSS DOCOL 1400 SHEET METAL

KÜÇÜKTÜRK G., Tahta M., GÜRÜN H., KARAAĞAÇ İ.

TRANSACTIONS OF FAMENA , cilt.46, sa.3, ss.51-62, 2022 (SCI-Expanded)

Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation

Abdelmoula M., KÜÇÜKTÜRK G., Juste E., Petit F.

APPLIED SCIENCES-BASEL , cilt.12, sa.2, 2022 (SCI-Expanded)

INVESTIGATING THE EFFECT OF ELECTRON BEAM MELTING PARAMETERS ON THE Ti6A14V ALLOY: A SIMULATION STUDY

KÜÇÜKTÜRK G., Akillilar H.

Transactions of Famena , cilt.46, sa.4, ss.45-58, 2022 (SCI-Expanded)

Scanning Strategy Investigation for Direct Powder Bed Selective Laser Processing of Silicon Carbide Ceramic

Abdelmoula M., Zarazaga A. M., Kucukturk G., Maury F., Grossin D., Ferrato M.

Applied Sciences (Switzerland) , cilt.12, sa.2, 2022 (SCI-Expanded)

Experimental and numerical study for direct powder bed selective laser processing (sintering/melting) of silicon carbide ceramic

Monton A., Abdelmoula M., KÜÇÜKTÜRK G., Maury F., Grossin D., Ferrato M.

MATERIALS RESEARCH EXPRESS , cilt.8, sa.4, 2021 (SCI-Expanded)

The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes

Xu Z., Dunleavey J., Antar M., Hood R., Soo S. L., Kucukturk G., et al.

International Journal of Fatigue , cilt.111, ss.196-207, 2018 (SCI-Expanded)

Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding

Rona N., YENİSEY M., KÜÇÜKTÜRK G., GÜRÜN H., ÇOĞUN C., ESEN Z.

JOURNAL OF PROSTHODONTIC RESEARCH , cilt.61, sa.2, ss.158-167, 2017 (SCI-Expanded)

Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration

ÇALIN R., PUL M., BİCAN O., KÜÇÜKTÜRK G.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.24, sa.1, ss.149-153, 2017 (SCI-Expanded)

The effect of minimum quantity lubrication under different parameters in the turning of AA7075 and AA2024 aluminium alloys

Cakir A., YAĞMUR S., Kavak N., KÜÇÜKTÜRK G., Seker U.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.84, ss.2515-2521, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Experimental investigation of the effects of clearance on product quality in AA5754 sheet material blanking process and estimation by fuzzy logic AA5754 Malzemenin kesme işlemlerinde kesme boşluǧunun ürün kalitesine etkilerinin deneysel incelenmesi ve bulanik mantik ile tahmini

Kucukturk G.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.31, sa.2, ss.285-294, 2016 (SCI-Expanded)

Modeling and analyzing the effects of experimentally determined torque and thrust force on cutting tool according to drilling parameters

KÜÇÜKTÜRK G.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.227, sa.B1, ss.84-95, 2013 (SCI-Expanded)

An Investigation of Thermal Properties of Zirconia Coating on Aluminum

URTEKİN L., KÜÇÜKTÜRK G., KARAÇAY T., USLAN İ., SALMAN S.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.37, sa.8, ss.2323-2332, 2012 (SCI-Expanded)

GEOMETRICAL APPROACH FOR REDUCTION OF TOOL SHAPE DEGENERATION IN ELECTRIC DISCHARGE MACHINING (EDM)

Cogun C., Deniz T. C., KÜÇÜKTÜRK G.

MACHINING SCIENCE AND TECHNOLOGY , cilt.16, sa.3, ss.445-458, 2012 (SCI-Expanded)

Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method

Pul M., KÜÇÜKTÜRK G., Calin R., Seker U.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.225, ss.84-90, 2011 (SCI-Expanded)

A NEW METHOD FOR MACHINING OF ELECTRICALLY NONCONDUCTIVE WORKPIECES USING ELECTRIC DISCHARGE MACHINING TECHNIQUE

KÜÇÜKTÜRK G., Cogun C.

MACHINING SCIENCE AND TECHNOLOGY , cilt.14, sa.2, ss.189-207, 2010 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Process parameters investigation for direct powder bed selective laser processing of silicon carbide parts

Zarazaga A. M., Abdelmoula M., KÜÇÜKTÜRK G., Maury F., Ferrato M., Grossin D.

PROGRESS IN ADDITIVE MANUFACTURING , cilt.7, sa.6, ss.1307-1322, 2022 (ESCI)

Experimental Optimization of Drilling Parameters in Tooling for Euro 7 Nozzle Production

KÜÇÜKTÜRK H., KÜÇÜKTÜRK G., YAVAŞ Ç., KATMER Ş., ŞEKER U.

International Journal of Automotive Science And Technology , cilt.5, sa.3, ss.254-265, 2021 (Hakemli Dergi)

AA7075 Matrisli B4C+SiC Takviyeli Hibrit Kompozitlerin Toz Takviyeli EEİ Yöntemiyle İşlenmesinde Boşalım Akımı ve Takviye Oranının İşlenmiş Yüzeyin Mikroyapısı ve Pürüzlülüğüne Etkisi

KESKİN G., KÜÇÜKTÜRK G., PUL M., GÜRÜN H., BAYDAROĞLU V.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.13, sa.2, ss.489-495, 2021 (Hakemli Dergi)

Design and Analysis of Lightweight Automotive Component for Turbocharger Units

TÜZEMEN M. Ç., AĞAOĞLU M., KARAKAYA M., SALAMCİ E., KÜÇÜKTÜRK G.

Manufacturing Science and Technology , cilt.3, sa.5, ss.278-285, 2015 (Hakemli Dergi)

ELEKTRO EROZYON İLE İŞLEMEDE ELEKTRİK İLETKEN OLMAYAN İŞ PARÇALARININ İŞLENMESİ İÇİN YENİ BİR YÖNTEM GELİŞTİRİLMESİ

KÜÇÜKTÜRK G., ÇOĞUN C.

MÜHENDIS VE MAKINA , cilt.50, sa.594, ss.8-13, 2009 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Effect of Circular Tool Shoulder End Features on Mechanical Properties of Friction Stir Welded Aluminum 6061 Alloy

Arıbal T., Kaya D., Küçüktürk G.

International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 27 Ekim 2022, ss.6-11, (Tam Metin Bildiri)

EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF PROCESS PARAMETERS ON SURFACE QUALITY AND DIMENSIONAL ACCURACY IN MACHINING OF AISI D2 TOOL STEEL BY EDM

KARADAĞ E., GÜRÜN H., DİLİPAK H., KÜÇÜKTÜRK G., GÜRKAN D.

8th INTERNATIONAL MARDIN ARTUKLU SCIENTIFIC RESEARCHES CONFERENCE, Mardin, Türkiye, 04 Haziran 2022, ss.920-930

Study the Effects of Electron Beam Welding Process Parameters on Thick Al6061 T6 Material

KÜÇÜKTÜRK G., ATKAYA M.

International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 02 Ekim 2020, ss.22-28

A Review on Using of Directed Energy Deposition (DED) in Manufacturing Processes

KAHYA H., KÜÇÜKTÜRK G., Mohamed H., GÜRÜN H.

International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2020), Ankara, Türkiye, 02 Ekim 2020