Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

EXPERIMENTAL DETERMINATION of BIOFILM and MECHANICAL PROPERTIES of SURFACES OBTAINED by CO2LASER GAS-ASSISTED NITRIDING of Ti-6Al-4V ALLOY

Urtekin L., Aydin Ş., Sevim A., Gök K., Uslan I.
Surface Review and Letters , cilt.29, sa.11, 2022 (SCI-Expanded) identifier identifier

Investigation of the effect of a dilatant material on ballistic strength of aramid fabric used as body armour suit

Senyilmaz H. K., USLAN İ., DEMİR T.
JOURNAL OF THE TEXTILE INSTITUTE , cilt.113, ss.580-588, 2022 (SCI-Expanded) identifier identifier

Thermo-fluid multi-physics modeling and experimental verification of volumetric workpiece material removal by a discharge pulse in electric discharge machining process

ERDEM O., ÇOĞUN C., USLAN İ., ERBAŞ M.
JOURNAL OF PHYSICS D-APPLIED PHYSICS , cilt.53, sa.39, 2020 (SCI-Expanded) identifier identifier

Proposal of a mathematical model for describing magnetorheological fluid dynamic behavior

DOĞDU N., USLAN İ., Yuksel S., PARLAK Z.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.33, sa.8, ss.3885-3893, 2019 (SCI-Expanded) identifier identifier

An investigation of moldability and mechanical properties of MgO added alumina

Erdem O., Urtekin L., Uslan İ.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.56, sa.1, ss.41-53, 2018 (SCI-Expanded) Creative Commons License identifier identifier

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
Journal of Materials Science and Technology , cilt.24, sa.1, ss.3-10, 2016 (SCI-Expanded)

Rektörden

USLAN İ.
Turk Kulturu ve Haci Bektas Veli - Arastirma Dergisi , cilt.79, ss.15-16, 2016 (SCI-Expanded) identifier

Performance and surface alloying characteristics of Cu-Cr and Cu-Mo powder metal tool electrodes in electrical discharge machining

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.
MACHINING SCIENCE AND TECHNOLOGY , cilt.20, sa.4, ss.523-546, 2016 (SCI-Expanded) identifier identifier

The effect of powder mixed and heated dielectric on drilling performance of electric discharge machining (EDM)

Erdem O., ÇOĞUN C., Urtekin L., ÖZERKAN H. B., USLAN İ.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.3, ss.531-544, 2016 (SCI-Expanded) Creative Commons License identifier identifier

EFFECT OF USE OF Cu-Cr P/M ELECTRODES ON MACHINING PERFORMANCE OF ELECTRIC DISCHARGE MACHINING

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.30, sa.3, ss.381-394, 2015 (SCI-Expanded) identifier identifier

An Investigation of Thermal Properties of Zirconia Coating on Aluminum

URTEKİN L., KÜÇÜKTÜRK G., KARAÇAY T., USLAN İ., SALMAN S.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.37, sa.8, ss.2323-2332, 2012 (SCI-Expanded) identifier identifier

INVESTIGATION OF EFFECT OF FEEDSTOCK RHEOLOGIES FOR INJECTION MOLDING OF STEATITE

URTEKİN L., USLAN İ., Tuc B.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.2, ss.333-341, 2012 (SCI-Expanded) identifier identifier

Investigation on the rheological behavior of Al-Fe-V-Si/Alumina composite powders

Turan E., Uslan İ., Ubeyli M.
Kovove Materialy , cilt.50, sa.1, ss.51-58, 2012 (SCI-Expanded) Creative Commons License identifier identifier

Investigation of Properties of Powder Injection-Molded Steatites

Urtekin L., Uslan İ., Tuc B.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.21, sa.3, ss.358-365, 2012 (SCI-Expanded) identifier identifier

AN INVESTIGATION ON THE EFFECT OF GAS ATOMISATION PARAMETERS ON TIN POWDER PRODUCTION

USLAN İ., Küçükarslan S.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.25, sa.1, ss.1-8, 2010 (SCI-Expanded) identifier identifier

Evaluation of Microhardness, Surface Roughness, and Wear Behavior of Different Types of Resin Composites Polymerized With Two Different Light Sources

Topcu F. T., Erdemir U., Sahinkesen G., Yıldız E., USLAN İ., Acikel C.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS , sa.2, ss.470-478, 2010 (SCI-Expanded) identifier identifier identifier

Wedge cutting of mild steel by CO(2) laser and cut-quality assessment in relation to normal cutting

Yilbas B. S., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., Yilbas Z., et al.
OPTICS AND LASERS IN ENGINEERING , cilt.46, sa.10, ss.777-784, 2008 (SCI-Expanded) identifier identifier

Laser cutting of Kevlar and mild steel composite structure: End product quality assessment

Al-Sulaiman F., Yilbas B. S., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.16, sa.1, ss.22-29, 2007 (SCI-Expanded) identifier identifier

Electrochemical properties of the laser nitrided surfaces of Ti-6Al-4V alloy

Yibas B. S., Khaled M., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., et al.
Surface and Coatings Technology , cilt.201, sa.3-4, ss.679-685, 2006 (SCI-Expanded) identifier identifier

CO2 laser gas assisted nitriding of Ti-6Al-4V alloy

Yibas B. S., Karatas C., Uslan U., KELEŞ Ö., Usta I. Y., Ahsan M.
APPLIED SURFACE SCIENCE , cilt.252, sa.24, ss.8557-8564, 2006 (SCI-Expanded) identifier identifier

Laser cutting of steel sheets: Influence of workpiece thickness and beam waist position on kerf size and stria formation

Karatas C., KELEŞ Ö., Uslan İ., USTA Y.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.172, sa.1, ss.22-29, 2006 (SCI-Expanded) identifier identifier

Laser cutting of corners: Assessment of cutting quality

Yilbas B., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., Ahsan M., et al.
LASERS IN ENGINEERING , cilt.16, ss.157-171, 2006 (SCI-Expanded) identifier identifier

CO2 laser cutting: kerf width variation during cutting

Uslan İ.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.219, sa.8, ss.571-577, 2005 (SCI-Expanded) identifier identifier

Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor

Kilinc Y., Ozturk S., Ozturk B., Uslan İ.
POWDER TECHNOLOGY , cilt.146, sa.3, ss.200-205, 2004 (SCI-Expanded) identifier identifier

A numerical approach to the cooling curves of porous P/M materials for quenching process

Ataer O., Aygun C., Uslan İ.
POWDER TECHNOLOGY , cilt.137, sa.3, ss.159-166, 2003 (SCI-Expanded) identifier identifier

Effects of variables on size and characteristics of gas atomised aluminium powders

Uslan İ., Saritas S., Davies T.
POWDER METALLURGY , cilt.42, sa.2, ss.157-163, 1999 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Ti6Al4V Alaşımının Elektro Erozyon ile İşlemesinde Elektrolitik Cu ve CuBe Takım Elektrotlarının Performansının Karşılaştırılması

URTEKİN L., BOZKURT F., ÖZERKAN H. B., ÇOĞUN C., USLAN İ.
El-Cezeri Fen ve Mühendislik Dergisi , cilt.8, sa.3, ss.1455-1461, 2021 (Scopus) identifier identifier

COVID-19 Özel Sayisi Önsözü

USLAN İ.
Gazi Medical Journal , cilt.31, sa.2 A, 2020 (ESCI) Sürdürülebilir Kalkınma identifier

Effect of Machining on Workpiece Surface Characteristics in Electric Discharge Drilling (EDD)

ERDEM O., ÇOĞUN C., USLAN İ.
International Journal of Advances in Engineering and Pure Sciences , sa.1, ss.11-16, 2019 (Hakemli Dergi) Creative Commons License

Effect of nozzle type on the particle size of air atomised aluminium powders

USLAN İ.
Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.14, sa.1, ss.1-15, 1999 (Scopus) identifier
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effects of Powder Morphology on the Apparent Density and the Flow Rate of Metal Powders

USLAN İ., USTA Y., Sarıtaş S.
2006 POWDER METALLURGY World Congress, Busan, Güney Kore, 24 Eylül 2006, cilt.1, ss.1256

Alüminyum 2024 Sacların Sürünme Yaşlandırma Şekillendirme Prosesindeki Geri Yaylanma Davranışının Deneysel Olarak Araştırılması

BAŞPINAR B. B., USLAN İ.
6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Türkiye, 20 - 21 Kasım 2021, ss.446-457

Effect of Machining Parameters on Workpiece Surface Characteristics in Electric Discharge Drilling (EDD)

ERDEM O., ÇOĞUN C., USLAN İ.
The 18th International Conference on Machine Design and Production, 3 - 06 Temmuz 2018

Investigation of Electrical Discharge Drilling (EDD) Performance of Ti-6Al-4V Super Alloy

ERDEM O., ÇOĞUN C., USLAN İ.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Kurşun geçirmez yelek üretiminde kullanılan aramid kumaşın iplik sürtünme özelliklerine dilatant malzemelerin etkisinin araştırılması

Şenyılmaz H. K., Uslan İ., ÜNAL H. İ., DEMİR T.
Aselsan 2. Malzeme Teknolojileri Çalıştayı, Ankara, Türkiye, 7 - 08 Kasım 2016, ss.56

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
Materials Science, Hydro- and Aerodynamics and National Security ’2015, Sofya, Bulgaristan, 22 - 23 Ekim 2015

MANYETOREOLOJİK SIVININ DİNAMİK DAVRANIŞININ İNCELENMESİ

DOĞDU N., USLAN İ., YÜKSEL Ş., KARAÇAY T., TÜRKÜCÜ T.
International Science and Technology Conference, St. Petersburg, Rusya, 2 - 04 Eylül 2015, ss.842-851

Electro Discharge Machining Performance of Chromium Copper Powder Metal Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014

TOZ KATKILI DİELEKTRİKLE ELEKTRO EROZYON İŞLEME PERFORMANSI

Oğuz e., ÇOĞUN C., URTEKİN L., ÖZERKAN H. B., USLAN İ.
7. Uluslarası Toz Metalurjisi Konferansı, Ankara, Türkiye, 24 - 28 Temmuz 2014, ss.1035

DESIGN AND OPTIMIZATION OF A LOW TEMPERATURE ORGANIC RANKINE CYCLE AND TURBINE

ERBAŞ M., Sofuoglu M. A., BIYIKOĞLU A., USLAN İ.
ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013 identifier identifier

DESIGN OF A NOZZLE FOR THE PRODUCTION OF METAL POWDER VIA GAS ATOMIZATION

Sofuoglu M. A., ERBAŞ M., USLAN İ., BIYIKOĞLU A.
ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013 identifier

DEVELOPMENT OF A SWIRL NOZZLE FOR POWDER TECHNOLOGY

Sofuoglu M. A., ERBAŞ M., USLAN İ., BIYIKOĞLU A.
ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013 identifier

Elektro Erozyon İle İşlemede Döner Elektrot İle Delik Delmede Dielektrik Sıvısına Karıştırılan Tozların Ve Isıtmanın İşleme Performansına Etkisi

ERDEM O., ÇOĞUN C., USLAN İ., URTEKİN L., ÖZERKAN H. B.
Makine İmalat Teknolojileri Kongresi, Türkiye, 6 - 07 Aralık 2013, cilt.2, ss.212-221

Experimental Investigation of Laser-Drilled Holes Variations Depending on Laser Drilling Parameters

Uslan İ., Erdogan S., KELEŞ Ö., USTA Y., Yilbas B. S., Tuc B.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.448-449 identifier identifier

Investigation of Powder Injection Molding Steatite: Rheology, Debinding and Sintering Parameters

URTEKİN L., USLAN İ., TUÇ B.
6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011

Toz Enjeksiyon Yöntemiyle Kalıplanmış MgO Takviyeli Alüminanın Mekanik Özelliklerinin Araştırılması

ERDEM O., USLAN İ.
6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011

Powder Metallurgy in Turkey

USTA Y., USLAN İ.
NDT Days, Sozopol, Bulgaristan, 9 - 13 Haziran 2009

Effect of processing parameters on the mechanical properties of powder injection molded alumina

USLAN İ., Yucel I., Urtekin L., Saritas S.
2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, Washington, Amerika Birleşik Devletleri, 8 - 12 Haziran 2008, ss.428-438 identifier

Investigation of The Apparent Density of Metal Powders: The Effects of Mixing Various Powder Sizes and Powder Geometry

URTEKİN L., USTA Y., USLAN İ., SARITAŞ S.
5th International Powder Metallurgy Conference, Ankara, Türkiye, 8 - 12 Ekim 2008

Gaz Atomize Aluminyum Tozu Oluşum Aşamalarının Morfolojik Olarak İncelenmesi

USLAN İ., SARITAŞ S.
3rd International Powder Metallurgy Conference, Sakarya, Türkiye, 04 Eylül 2002 - 08 Eylül 2008

Investigation of sintering behaviors of steatite parts produced by powder injection molding

USLAN İ., Berber M., Karatas C., Saritas S.
Power Metallurgy World Congress and Exhibition 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.549-550 identifier identifier

Investigation of rheological properties of the feedstocks composed of steatite and 316l stainless steel powders and peg based resins

KARATAŞ Ç., Gokten M., ÜNAL H. İ., Saritas S., USLAN İ.
European Powder Metallurgy Congress and Exhibition, Euro PM 2005, Prague, Çek Cumhuriyeti, 2 - 05 Ekim 2005, cilt.2, ss.375-381 identifier

Morphological investigation of the formation of gas atomised aluminium powders Gaz atomize aluminyum tozu oluşum aşamalarinin morfolojik olarak incelenmesi

USLAN İ., SARITAŞ S.
Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1297-1306 identifier

Microstructural investigation of spray formed aluminum parts Püskürtme şekillendirme aluminyum parçalarin mikroyapisal incelenmesi

Ekici A. A., USLAN İ., SARITAŞ S.
Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1356-1361 identifier

Production and testing of an air classifier Havali toz siniflandirici imalati ve test edilmesi

Demirhan L., USLAN İ., SARITAŞ S.
Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1348-1355 identifier

Construction of a vibratory horizontal attritor and investigation of milling characteristics of alumina Titreşimli yatay atritor imalati ve alumina öǧütme davranişinin incelenmesi

Kilinç Y., USLAN İ.
Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1075-1084 identifier

Microstructural observations in diffusion bonding of a PM bronze bearing to a low carbon steel bushing Toz metal bronz yataǧin düşük karbonlu çeliǧe difüzyon kaynaǧinda mikroyapisal tespitler

Çetiner C., USLAN İ., SARITAŞ S.
Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1322-1330 identifier

Effects of Atomisation Parameters on the Shape of Aluminium Powders

USLAN İ., SARITAŞ S.
Powder Metallurgy World Congress, Tokyo, Japonya, 12 - 16 Kasım 2000

Investigation of relation between cooling rate and powder size of air and nitrogen atomised aluminium powders Gaz atomi̇ze alumi̇nyum tozlarinda soǧuma hizinin toz boyutuyla deǧi̇şi̇mi̇ni̇n araştirilmasi

USLAN İ., SARITAŞ S.
Ulusal Toz Metalurjisi Konferansi: Second National Powder Metallurgy Conference, Ankara, Türkiye, 15 - 17 Eylül 1999, ss.399-408 identifier

Gaz Atomize Aluminyum Tozlarında Soğuma Hızının Toz Boyutuyla Değişiminin Araştırılması

USLAN İ., SARITAŞ S.
Uluslararası Katılımlı 2. Ulusal Toz Metalurjisi Konferansı, Ankara, Türkiye, 15 - 17 Eylül 1999

Investigation of gas type, gas pressure and nozzle geometry effects on aluminium powder size in gas atomization Gaz atomi̇zasyonunda nozul geometri̇si̇, gaz ci̇nsi̇ ve basincinin alumi̇nyum tozu boyutuna etki̇si̇ni̇n araştirilmasi

USLAN İ., SARITAŞ S.
Ulusal Toz Metalurjisi Konferansi: First National Powder Metallurgy Conference, Ankara, Türkiye, 16 - 17 Eylül 1996, ss.217-228 identifier

Gaz Atomizasyonunda Nozul Geometrisi, Gaz Cinsi ve Basıncının Aluminyum Tozu Boyutuna Etkisinin Araştırılması

USLAN İ., SARITAŞ S.
1. Ulusal Toz Metalurjisi Konferansı, Ankara, Türkiye, 16 - 17 Eylül 1996
Kitap & Kitap Bölümleri

Proceedings Of The 6th International Powder Metallurgy Conference

Türker M. (Editör), Kalkanlı A. (Editör), Uslan İ. (Editör), Dericioğlu A. F. (Editör), Usta Y. (Editör), Demir T. (Editör)
Türk Toz Metalurjisi Derneği, Ankara, 2011

Proceedings Of The 3rd International Powder Metallurgy Conference

Sarıtaş S. (Editör), Uslan İ. (Editör), Usta Y. (Editör)
Türk Toz Metalurjisi Derneği, Ankara, 2002
Metrikler

Yayın

64

Atıf (WoS)

302

H-İndeks (WoS)

10

Atıf (Scopus)

411

H-İndeks (Scopus)

11

Atıf (Scholar)

29

H-İndeks (Scholar)

2

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

1

Proje

11

Tez Danışmanlığı

16

Açık Erişim

14
BM Sürdürülebilir Kalkınma Amaçları