Prof. Dr. İBRAHİM USLAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

EXPERIMENTAL DETERMINATION of BIOFILM and MECHANICAL PROPERTIES of SURFACES OBTAINED by CO2LASER GAS-ASSISTED NITRIDING of Ti-6Al-4V ALLOY

Urtekin L., Aydin Ş., Sevim A., Gök K., Uslan I.

Surface Review and Letters , cilt.29, sa.11, 2022 (SCI-Expanded)

Investigation of the effect of a dilatant material on ballistic strength of aramid fabric used as body armour suit

Senyilmaz H. K., USLAN İ., DEMİR T.

JOURNAL OF THE TEXTILE INSTITUTE , cilt.113, ss.580-588, 2022 (SCI-Expanded)

Thermo-fluid multi-physics modeling and experimental verification of volumetric workpiece material removal by a discharge pulse in electric discharge machining process

ERDEM O., ÇOĞUN C., USLAN İ., ERBAŞ M.

JOURNAL OF PHYSICS D-APPLIED PHYSICS , cilt.53, sa.39, 2020 (SCI-Expanded)

Proposal of a mathematical model for describing magnetorheological fluid dynamic behavior

DOĞDU N., USLAN İ., Yuksel S., PARLAK Z.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.33, sa.8, ss.3885-3893, 2019 (SCI-Expanded)

An investigation of moldability and mechanical properties of MgO added alumina

Erdem O., Urtekin L., Uslan İ.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.56, sa.1, ss.41-53, 2018 (SCI-Expanded)

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.

Journal of Materials Science and Technology , cilt.24, sa.1, ss.3-10, 2016 (SCI-Expanded)

Rektörden

USLAN İ.

Turk Kulturu ve Haci Bektas Veli - Arastirma Dergisi , cilt.79, ss.15-16, 2016 (SCI-Expanded)

Performance and surface alloying characteristics of Cu-Cr and Cu-Mo powder metal tool electrodes in electrical discharge machining

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.

MACHINING SCIENCE AND TECHNOLOGY , cilt.20, sa.4, ss.523-546, 2016 (SCI-Expanded)

The effect of powder mixed and heated dielectric on drilling performance of electric discharge machining (EDM)

Erdem O., ÇOĞUN C., Urtekin L., ÖZERKAN H. B., USLAN İ.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.3, ss.531-544, 2016 (SCI-Expanded)

EFFECT OF USE OF Cu-Cr P/M ELECTRODES ON MACHINING PERFORMANCE OF ELECTRIC DISCHARGE MACHINING

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.30, sa.3, ss.381-394, 2015 (SCI-Expanded)

An Investigation of Thermal Properties of Zirconia Coating on Aluminum

URTEKİN L., KÜÇÜKTÜRK G., KARAÇAY T., USLAN İ., SALMAN S.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.37, sa.8, ss.2323-2332, 2012 (SCI-Expanded)

INVESTIGATION OF EFFECT OF FEEDSTOCK RHEOLOGIES FOR INJECTION MOLDING OF STEATITE

URTEKİN L., USLAN İ., Tuc B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.2, ss.333-341, 2012 (SCI-Expanded)

Investigation on the rheological behavior of Al-Fe-V-Si/Alumina composite powders

Turan E., Uslan İ., Ubeyli M.

Kovove Materialy , cilt.50, sa.1, ss.51-58, 2012 (SCI-Expanded)

Investigation of Properties of Powder Injection-Molded Steatites

Urtekin L., Uslan İ., Tuc B.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.21, sa.3, ss.358-365, 2012 (SCI-Expanded)

AN INVESTIGATION ON THE EFFECT OF GAS ATOMISATION PARAMETERS ON TIN POWDER PRODUCTION

USLAN İ., Küçükarslan S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.25, sa.1, ss.1-8, 2010 (SCI-Expanded)

Evaluation of Microhardness, Surface Roughness, and Wear Behavior of Different Types of Resin Composites Polymerized With Two Different Light Sources

Topcu F. T., Erdemir U., Sahinkesen G., Yıldız E., USLAN İ., Acikel C.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS , sa.2, ss.470-478, 2010 (SCI-Expanded)

Wedge cutting of mild steel by CO(2) laser and cut-quality assessment in relation to normal cutting

Yilbas B. S., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., Yilbas Z., et al.

OPTICS AND LASERS IN ENGINEERING , cilt.46, sa.10, ss.777-784, 2008 (SCI-Expanded)

Laser cutting of Kevlar and mild steel composite structure: End product quality assessment

Al-Sulaiman F., Yilbas B. S., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.16, sa.1, ss.22-29, 2007 (SCI-Expanded)

Electrochemical properties of the laser nitrided surfaces of Ti-6Al-4V alloy

Yibas B. S., Khaled M., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., et al.

Surface and Coatings Technology , cilt.201, sa.3-4, ss.679-685, 2006 (SCI-Expanded)

CO2 laser gas assisted nitriding of Ti-6Al-4V alloy

Yibas B. S., Karatas C., Uslan U., KELEŞ Ö., Usta I. Y., Ahsan M.

APPLIED SURFACE SCIENCE , cilt.252, sa.24, ss.8557-8564, 2006 (SCI-Expanded)

Laser cutting of steel sheets: Influence of workpiece thickness and beam waist position on kerf size and stria formation

Karatas C., KELEŞ Ö., Uslan İ., USTA Y.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.172, sa.1, ss.22-29, 2006 (SCI-Expanded)

Laser cutting of corners: Assessment of cutting quality

Yilbas B., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., Ahsan M., et al.

LASERS IN ENGINEERING , cilt.16, ss.157-171, 2006 (SCI-Expanded)

CO2 laser cutting: kerf width variation during cutting

Uslan İ.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.219, sa.8, ss.571-577, 2005 (SCI-Expanded)

Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor

Kilinc Y., Ozturk S., Ozturk B., Uslan İ.

POWDER TECHNOLOGY , cilt.146, sa.3, ss.200-205, 2004 (SCI-Expanded)

A numerical approach to the cooling curves of porous P/M materials for quenching process

Ataer O., Aygun C., Uslan İ.

POWDER TECHNOLOGY , cilt.137, sa.3, ss.159-166, 2003 (SCI-Expanded)

Effects of variables on size and characteristics of gas atomised aluminium powders

Uslan İ., Saritas S., Davies T.

POWDER METALLURGY , cilt.42, sa.2, ss.157-163, 1999 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Ti6Al4V Alaşımının Elektro Erozyon ile İşlemesinde Elektrolitik Cu ve CuBe Takım Elektrotlarının Performansının Karşılaştırılması

URTEKİN L., BOZKURT F., ÖZERKAN H. B., ÇOĞUN C., USLAN İ.

El-Cezeri Fen ve Mühendislik Dergisi , cilt.8, sa.3, ss.1455-1461, 2021 (Scopus)

COVID-19 Özel Sayisi Önsözü

USLAN İ.

Gazi Medical Journal , cilt.31, sa.2 A, 2020 (ESCI) Sürdürülebilir Kalkınma

Effect of Machining on Workpiece Surface Characteristics in Electric Discharge Drilling (EDD)

ERDEM O., ÇOĞUN C., USLAN İ.

International Journal of Advances in Engineering and Pure Sciences , sa.1, ss.11-16, 2019 (Hakemli Dergi)

Effect of nozzle type on the particle size of air atomised aluminium powders

USLAN İ.

Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.14, sa.1, ss.1-15, 1999 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effects of Powder Morphology on the Apparent Density and the Flow Rate of Metal Powders

USLAN İ., USTA Y., Sarıtaş S.

2006 POWDER METALLURGY World Congress, Busan, Güney Kore, 24 Eylül 2006, cilt.1, ss.1256

Alüminyum 2024 Sacların Sürünme Yaşlandırma Şekillendirme Prosesindeki Geri Yaylanma Davranışının Deneysel Olarak Araştırılması

BAŞPINAR B. B., USLAN İ.

6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Türkiye, 20 - 21 Kasım 2021, ss.446-457

Effect of Machining Parameters on Workpiece Surface Characteristics in Electric Discharge Drilling (EDD)

ERDEM O., ÇOĞUN C., USLAN İ.

The 18th International Conference on Machine Design and Production, 3 - 06 Temmuz 2018

Investigation of Electrical Discharge Drilling (EDD) Performance of Ti-6Al-4V Super Alloy

ERDEM O., ÇOĞUN C., USLAN İ.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Kurşun geçirmez yelek üretiminde kullanılan aramid kumaşın iplik sürtünme özelliklerine dilatant malzemelerin etkisinin araştırılması

Şenyılmaz H. K., Uslan İ., ÜNAL H. İ., DEMİR T.

Aselsan 2. Malzeme Teknolojileri Çalıştayı, Ankara, Türkiye, 7 - 08 Kasım 2016, ss.56

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.

Materials Science, Hydro- and Aerodynamics and National Security ’2015, Sofya, Bulgaristan, 22 - 23 Ekim 2015

MANYETOREOLOJİK SIVININ DİNAMİK DAVRANIŞININ İNCELENMESİ

DOĞDU N., USLAN İ., YÜKSEL Ş., KARAÇAY T., TÜRKÜCÜ T.

International Science and Technology Conference, St. Petersburg, Rusya, 2 - 04 Eylül 2015, ss.842-851

Electro Discharge Machining Performance of Chromium Copper Powder Metal Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.

7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014

TOZ KATKILI DİELEKTRİKLE ELEKTRO EROZYON İŞLEME PERFORMANSI

Oğuz e., ÇOĞUN C., URTEKİN L., ÖZERKAN H. B., USLAN İ.

7. Uluslarası Toz Metalurjisi Konferansı, Ankara, Türkiye, 24 - 28 Temmuz 2014, ss.1035

DESIGN AND OPTIMIZATION OF A LOW TEMPERATURE ORGANIC RANKINE CYCLE AND TURBINE

ERBAŞ M., Sofuoglu M. A., BIYIKOĞLU A., USLAN İ.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

DESIGN OF A NOZZLE FOR THE PRODUCTION OF METAL POWDER VIA GAS ATOMIZATION

Sofuoglu M. A., ERBAŞ M., USLAN İ., BIYIKOĞLU A.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

DEVELOPMENT OF A SWIRL NOZZLE FOR POWDER TECHNOLOGY

Sofuoglu M. A., ERBAŞ M., USLAN İ., BIYIKOĞLU A.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

Elektro Erozyon İle İşlemede Döner Elektrot İle Delik Delmede Dielektrik Sıvısına Karıştırılan Tozların Ve Isıtmanın İşleme Performansına Etkisi

ERDEM O., ÇOĞUN C., USLAN İ., URTEKİN L., ÖZERKAN H. B.

Makine İmalat Teknolojileri Kongresi, Türkiye, 6 - 07 Aralık 2013, cilt.2, ss.212-221

Experimental Investigation of Laser-Drilled Holes Variations Depending on Laser Drilling Parameters

Uslan İ., Erdogan S., KELEŞ Ö., USTA Y., Yilbas B. S., Tuc B.

14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.448-449

Investigation of Powder Injection Molding Steatite: Rheology, Debinding and Sintering Parameters

URTEKİN L., USLAN İ., TUÇ B.

6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011

Toz Enjeksiyon Yöntemiyle Kalıplanmış MgO Takviyeli Alüminanın Mekanik Özelliklerinin Araştırılması

ERDEM O., USLAN İ.

6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011

Powder Metallurgy in Turkey

USTA Y., USLAN İ.

NDT Days, Sozopol, Bulgaristan, 9 - 13 Haziran 2009

Effect of processing parameters on the mechanical properties of powder injection molded alumina

USLAN İ., Yucel I., Urtekin L., Saritas S.

2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, Washington, Amerika Birleşik Devletleri, 8 - 12 Haziran 2008, ss.428-438