Prof. Dr. MUSTAFA YURDAKUL

Ulutürk İ., YURDAKUL M., İÇ Y. T.

Decision Analytics Journal , cilt.4, 2022 (Hakemli Dergi)

13. Development and comparison of airplane fuselage panel assembly system alternatives using axiomatic design principles and simulation methodology

Celek O. E., YURDAKUL M., İÇ Y. T.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM , cilt.16, sa.3, ss.1175-1186, 2022 (ESCI, Scopus)

14. Development of a Goal Programming Model Based on Response Surface and Analytic Hierarchy Process Approaches for Laser Cutting Process Optimization of St-52 Steel Plates

Yurdakul M., Tukel T., İç Y. T.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS , cilt.21, sa.02, ss.293-316, 2022 (Hakemli Dergi)

15. Bir imalat firmasında en iyi ürün kalitesi için lazer ile kesim parametrelerinin eniyilenmesi

Yurdakul M., Tükel T., İç Y. T., Ülke İ., Balcı A., Güneş S.

Journal of the Turkish Operations Management (JTOM) , cilt.6, sa.1, ss.977-996, 2022 (TRDizin)

16. Analysis of the manufacturing flexibility parameters with effective performance metrics: a new interactive approach based on modified TOPSIS-Taguchi method

İç Y. T., Sasmaz T., Yurdakul M., Dengiz B.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM , cilt.16, sa.1, ss.197-225, 2022 (Hakemli Dergi)

17. Development of a hybrid financial performance measurement model using AHP and DOE methods for Turkish commercial banks

Iç Y. T., Yurdakul M., Pehlivan E.

SOFT COMPUTING , cilt.26, sa.6, ss.2959-2979, 2022 (SCI-Expanded, Scopus)

18. Bir imalat firmasında en iyi ürün kalitesi için lazer ile kesim parametrelerinin eniyilenmesi.

Yurdakul M., Tükel T., İç Y. T., Ülke İ., Balcı A., Güneş S.

JOURNAL OF TURKISH OPERATIONS MANAGEMENT , cilt.6, sa.1, ss.977-996, 2022 (TRDizin)

19. Development of a new hesitant fuzzy ranking model for NTMP ranking problem

Atalay K. D., Ic Y. T., Kececi B., Yurdakul M., Boran M.

SOFT COMPUTING , cilt.25, sa.23, ss.14537-14548, 2021 (SCI-Expanded, Scopus)

20. Elektrokimyasal Jet İşleme (EJİ) Parametrelerinin İşlenen Kanal Geometrilerine Etkisi

Ayhan E., Yurdakul M., Çoğun C.

Gazi Mühendislik Bilimleri Dergisi , cilt.7, sa.3, ss.213-221, 2021 (TRDizin)

21. Development of a new trapezoidal fuzzy AHP-TOPSIS hybrid approach for manufacturing firm performance measurement

Iç Y. T., Yurdakul M.

GRANULAR COMPUTING , cilt.6, sa.4, ss.915-929, 2021 (ESCI, Scopus)

22. Partitioning of a manufacturing system into machine cells-a practical application

Iç Y. T., Agca B. V., Yurdakul M.

EVOLVING SYSTEMS , cilt.12, sa.2, ss.423-438, 2021 (SCI-Expanded, Scopus)

23. Determination of periodic inspection time in pressurized equipment exposed to fatigue by estimating the probability of fracture

Sozen L., Yurdakul M., Iç Y. T.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.4, ss.1977-1992, 2021 (SCI-Expanded, Scopus, TRDizin)

24. Aksiyomatik Tasarım Yöntemi İle Yenilikçi Ürün Geliştirilmesi

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.4, ss.987-1002, 2020 (ESCI, TRDizin)

25. Development of an Innovative Product Using Axiomatic Design Methodology

Uluturk I., Yurdakul M., İç Y. T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, ss.987-1002, 2020 (ESCI, TRDizin)

26. İşleme Merkezlerinin Yapısal Bileşenlerini Kullanan Bir Seçim Modelinin Geliştirilmesi

Makina Tasarım ve İmalat Dergisi , cilt.18, sa.2, ss.53-62, 2020 (TRDizin)

27. Güvenirlik Temelli Mekanik Sistem Tasarımı ve Sistem Güvenirliğinin Öngörülmesi

Sözen L., YURDAKUL M., İÇ Y. T.

Makina Tasarım ve İmalat Dergisi , cilt.18, sa.2, ss.63-74, 2020 (TRDizin)

28. Development of an intuitionistic fuzzy ranking model for nontraditional machining processes

Yurdakul M., Iç Y. T., Atalay K. D.

SOFT COMPUTING , cilt.24, ss.10095-10110, 2020 (SCI-Expanded, Scopus)

29. 3 BOYUTLU YAZICI KULLANIMININ ÖĞRENCİLERİN AR-GE YETENEKLERİNİN GELİŞİMİNE ETKİSİNİN İNCELENMESİ: OSTİM TEKNİK ÜNİVERSİTESİ MESLEK YÜKSEKOKULUNDA ÖRNEK BİR UYGULAMA

GÜNEŞ S., YURDAKUL M., Kalaycı U., Uyanık U., Şentürk S.

International Journal of 3D Printing Technologies and Digital Industry , cilt.4, sa.1, ss.1-11, 2020 (TRDizin)

30. A knowledge-based material selection system for interactive pressure vessel design

Yurdakul M., Balci A., Iç Y. T.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM , cilt.14, ss.323-343, 2020 (ESCI, Scopus)

31. Analysis of the effect of the number of criteria and alternatives on the ranking results in applications of the multi criteria decision making approaches in machining center selection problems

İç Y. T., Yurdakul M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, ss.991-1001, 2020 (SCI-Expanded, Scopus, TRDizin)

32. Development of a New Support Mechanism to Calculate Feed-in Tariffs for Electricity Generation from Renewable Energy Sources in Turkey

YURDAKUL M., GÖKPINAR E., İÇ Y. T.

PROCESS INTEGRATION AND OPTIMIZATION FOR SUSTAINABILITY , cilt.3, sa.4, ss.423-436, 2019 (ESCI, Scopus) Sürdürülebilir Kalkınma

33. Resmi Bir Kurumda Risk Analizi Uygulaması

MÜHENDİS VE MAKİNA , cilt.60, sa.696, ss.221-230, 2019 (TRDizin)

34. Analysis of Performance Improvement Brought by the Application of an ISO 9001 Quality Management System With TOPSIS Approach

Gökpınar E., İÇ Y. T., YURDAKUL M.

International Journal of Knowledge-Based Organizations , cilt.9, sa.3, ss.1-13, 2019 (Hakemli Dergi)

35. Comparison of Fuzzy and Crisp Versions of an AHP and TOPSIS Model for Nontraditional Manufacturing Process Ranking Decision

YURDAKUL M., Ic Y. T.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS , cilt.18, sa.2, ss.167-192, 2019 (ESCI, Scopus)

36. Development of a multi-level performance measurement model for manufacturing companies using a modified version of the fuzzy TOPSIS approach

SOFT COMPUTING , cilt.22, sa.22, ss.7491-7503, 2018 (SCI-Expanded, Scopus)

37. Tam Otomatik Üretim Sistemi Uygulaması

GÜNEŞ S., YURDAKUL M., İÇ Y. T., ÇELEK O. E.

TMMOB Makina Mühendisleri Odası Mühendis ve Makina Dergisi_Güncel , cilt.59, sa.703, ss.46-55, 2018 (Hakemli Dergi)

38. Optimization of the Factors That are Critical in External Surface Grinding of Roller Followers Using Design of Experiments

Gunay E., YURDAKUL M., İÇ Y. T., Mizrak H. V., GÜNEŞ S.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, sa.1, ss.27-37, 2018 (ESCI, TRDizin)

39. Development of a decision support system to select materials for pressure vessels

Balci A., YURDAKUL M., İÇ Y. T.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.1, ss.115-125, 2018 (SCI-Expanded, Scopus, TRDizin)

40. Bir İmalat Sisteminde Darboğaz Modeli ile Üretim Kapasitesinin Artırılması

İÇ Y. T., YURDAKUL M., KEÇECİ B., TOKMAK Ö., KOÇ G. G., BUYRUK G.

Makine Tasarım ve İmalat Dergisi , cilt.15, sa.1, ss.1, 2017 (TRDizin)

41. IMPROVEMENT OF THE SURFACE QUALITY IN THE HONING PROCESS USING TAGUCHI METHOD

YURDAKUL M., GÜNEŞ S., İÇ Y. T.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.2, ss.347-360, 2016 (SCI-Expanded, Scopus, TRDizin)

42. A new usability evaluation approach for touch screen mobile devices

ERASLAN E., İÇ Y. T., YURDAKUL M.

International Journal of Business and Systems Research , cilt.10, ss.186, 2016 (Scopus)

43. Improvement of the surface quality in the honing process using taguchi method,Honlama prosesinde yüzey kalitesinin taguchi metodu ile iyileştirilmesi

Yurdakul M., Güneş S., Iç Y.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, ss.347-360, 2016 (SCI-Expanded, Scopus, TRDizin)

44. Development of a two stage advanced manufacturing technology option selection model to use in Turkish manufacturing companies

J. for Global Business Advancement , cilt.8, sa.2, ss.176-189, 2015 (Scopus)

45. A decision support system for selection of net-shape primary manufacturing processes

YURDAKUL M., Arslan E., İÇ Y. T., Turkbas O. S.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.52, sa.5, ss.1528-1541, 2014 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

46. USAGE OF FUZZY MULTI CRITERIA DECISION MAKING METHODS IN SELECTION OF NONTRADITIONAL MANUFACTURING METHODS

Kul Y., Seker A., YURDAKUL M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.29, sa.3, ss.589-603, 2014 (SCI-Expanded, Scopus, TRDizin)

47. Usage of fuzzy multi criteria decision making methods in selection of nontraditional manufacturing methods,Bulanik çok kriterli karar verme yöntemlerinin alişilmamiş imalat yöntemlerinin seçiminde kullanilmasi

Kul Y., Seker A., Yurdakul M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.29, ss.589-603, 2014 (SCI-Expanded, Scopus, TRDizin)

48. Development of a decision support system for robot selection

İÇ Y. T., YURDAKUL M., DENGİZ B.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING , cilt.29, sa.4, ss.142-157, 2013 (SCI-Expanded, Scopus)

49. Development of a component-based machining centre selection model using AHP

İÇ Y. T., YURDAKUL M., ERASLAN E.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.50, sa.22, ss.6489-6498, 2012 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

50. Development of a quick credibility scoring decision support system using fuzzy TOPSIS

EXPERT SYSTEMS WITH APPLICATIONS , cilt.37, sa.1, ss.567-574, 2010 (SCI-Expanded, Scopus)

51. Development of a decision support system for machining center selection

Ic Y. T., YURDAKUL M.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.36, sa.2, ss.3505-3513, 2009 (SCI-Expanded, Scopus)

52. Application of correlation test to criteria selection for multi criteria decision making (MCDM) models

YURDAKUL M., Ic Y. T.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.40, ss.403-412, 2009 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

53. Analysis of the benefit generated by using fuzzy numbers in a TOPSIS model developed for machine tool selection problems

YURDAKUL M., Ic Y. T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.209, sa.1, ss.310-317, 2009 (SCI-Expanded, Scopus)

54. A DECISION SUPPORT SYSTEM FOR SELECTION OF MACHINING CENTERS

Ic Y. T., Yurdakul M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.23, sa.1, ss.85-95, 2008 (SCI-Expanded, Scopus, TRDizin) Sürdürülebilir Kalkınma

55. A decision support system for selection of machining centers,İşleme merkezi̇ seçi̇mi̇ne yöneli̇k bi̇r karar destek si̇stemi̇ni̇n geli̇şti̇ri̇ lmesi̇

Iç Y., Yurdakul M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.23, ss.85-95, 2008 (Scopus, TRDizin)

56. Development of a performance measurement model for manufacturing companies using the AHP and TOPSIS approaches

Yurdakul M., Ic Y.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.43, sa.21, ss.4609-4641, 2005 (SCI-Expanded, Scopus)

57. Development of a decision support system to use in the selection of material handling systems Malzeme Taşima Si̇stemleri̇ni̇n Seçi̇ lmesi̇ne Yöneli̇k Bi̇r Karar Destek Si̇stemi̇ Geli̇şTi̇ri̇lmesi̇

YURDAKUL M., Ipek A. Ö.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.20, sa.2, ss.171-181, 2005 (Scopus, TRDizin)

58. Development of a new dioid algebraic model for manufacturing with the scheduling decision making capability

Yurdakul M., Odrey N.

ROBOTICS AND AUTONOMOUS SYSTEMS , cilt.49, sa.3-4, ss.207-218, 2004 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

59. Selection of computer-integrated manufacturing technologies using a combined analytic hierarchy process and goal programming model

Yurdakul M.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING , cilt.20, sa.4, ss.329-340, 2004 (SCI-Expanded, Scopus)

60. AHP approach in the credit evaluation of the manufacturing firms in Turkey

Yurdakul M., Ic Y.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS , cilt.88, sa.3, ss.269-289, 2004 (SCI-Expanded, Scopus)

61. AHP as a strategic decision-making tool to justify machine tool selection

Yurdakul M.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.146, sa.3, ss.365-376, 2004 (SCI-Expanded, Scopus)

62. Measuring long-term performance of a manufacturing firm using the Analytic Network Process (ANP) approach

Yurdakul M.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.41, sa.11, ss.2501-2529, 2003 (SCI-Expanded, Scopus)

63. An illustrative study aimed to measure and rank performance of Turkish automotive companies using TOPSIS Türk otomotiv firmalarinin performans ölçümü ve analizine yönelik TOPSIS yöntemini kullanan bir örnek çalişma

YURDAKUL M., Iç Y. T.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.18, sa.1, ss.1-18, 2003 (Scopus, TRDizin)

64. Development of a multi-attribute selection procedure for non-traditional machining processes

Yurdakul M., Cogun C.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.217, sa.7, ss.993-1009, 2003 (SCI-Expanded, Scopus)

65. Selection of aerospace aluminum alloys Havacilik alaninda kullanilan alüminyum alaşimlarinin seçimi

YURDAKUL M., Özbay O., Iç Y. T.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.17, sa.2, ss.1-23, 2002 (Scopus, TRDizin)

66. Measuring a manufacturing system's performance using Saaty's system with feedback approach

Integrated Manufacturing Systems , cilt.13, sa.1, ss.25-34, 2002 (Scopus)

67. Analitik Hiyerarşi Sürecini AHS Kullanan Bir Kredi Değerlendirme Sistemi

Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.15, ss.1-14, 2000 (Hakemli Dergi)

68. Construction of a credit evaluation model using Analytic Hierarchy Process (AHP) Analitik Hiyerarşi Süreci (AHS) yöntemini kullanan bir kredi deǧerlendirme sistemi

Iç Y. T., YURDAKUL M.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.15, sa.1-2, ss.1-14, 2000 (Scopus, TRDizin)

69. Üretim Firmalarının Kredibilitelerinin Belirlenmesinde Analitik Hiyerarşi Prosesi Yönteminin Kullanılması

Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.13, ss.1007-1021, 2000 (TRDizin)

70. Development of a performance measurement system for manufacturing firms by taking practices and success conditions as criteria Imalat firmalarinda başariyi saǧlayan koşul ve uygulamalari kriter olarak kullanan bir performans ölçüm sisteminin geliştirilmesi

YURDAKUL M., Iç Y. T.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.14, sa.1-2, ss.73-90, 1999 (Scopus, TRDizin)

71. İmalat Firmalarında Başarıyı Sağlayan Koşul ve Uygulamaları Kriter Olarak Kullanan Bir Performans Ölçüm Sistemi

Ülke İ., Öztürk M. F., Yurdakul M.

Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.14, ss.73-90, 1999 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. Akü Bileşenlerinde Yapılacak Değişikliklerin Akünün Performansına Etkilerinin Deneysel Tasarım Yöntemi ile İncelenmesi

GLOBAL CONFERENCE on ENGINEERING RESEARCH, Balıkesir, Türkiye, 13 Eylül 2023, ss.401-407, (Tam Metin Bildiri)

2. Selecting MCDM Criteria for Machining Center Ranking Decisions Using Design of Experiments and TOPSIS Approaches

Iç Y. T., YURDAKUL M.

Science, Engineering Management and Information Technology First International Conference, SEMIT 2022, Virtual, Online, 2 - 03 Şubat 2022, cilt.1808 CCIS, ss.324-343, (Tam Metin Bildiri)

3. The Use of Petri Nets in Performance Analysis of Flexible Manufacturing Cell

Bulca F. B., İÇ Y. T., YURDAKUL M.

16th International Conference on Management Science and Engineering Management (ICMSEM), Ankara, Türkiye, 3 - 06 Ağustos 2022, cilt.144, ss.678-692, (Tam Metin Bildiri)

4. SÜRTÜNME KARIŞTIRMA KAYNAĞIYLA BİRLEŞTİRİLMİŞ AA6061-T6 VE AA7075-T6 MALZEME ÇİFTLERİNİN DENEY SONUÇLARININ İRDELENMESİ

ÜLKE İ., YURDAKUL M.

ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE YENİLİKÇİ ÇALIŞMALAR SEMPOZYUMU (ISSRIS'21), Balıkesir, Türkiye, 22 - 25 Şubat 2021, ss.136-145, (Tam Metin Bildiri)

5. A Kanban Implementation Study in a Production Line

YURDAKUL M., Iç Y. T., Gulsen M.

AHFE Virtual Conference on Production Management and Process Control, Human Aspects of Advanced Manufacturing and the Additive Manufacturing, Modeling Systems and 3D Prototyping, 2020, California, Amerika Birleşik Devletleri, 16 - 20 Temmuz 2020, cilt.1216 AISC, ss.228-234, (Tam Metin Bildiri)

6. A Component Based Model Developed for Machine Tool Selection Decisions

Iç Y. T., Yurdakul M.

10th International Conference on Applied Human Factors and Ergonomics (AHFE) / AHFE International Conference on Human Aspects of Advanced Manufacturing / AHFE International Conference on Advanced Production Management and Process Control (APMPC), Washington, Kiribati, 24 - 28 Temmuz 2019, cilt.971, ss.279-288, (Tam Metin Bildiri)

7. LAZER İLE KESİM PARAMETRELERİNİN DENEY TASARIM YÖNTEMİ İLE EN İYİLENMESİ

Tükel T., YURDAKUL M.

ULUSLARARASI BİLİM, TEKNOLOJİ VE SOSYAL BİLİMLERDE GÜNCEL GELİŞMELER SEMPOZYUMU, Ankara, Türkiye, 20 - 22 Aralık 2019, cilt.2, ss.286-293, (Tam Metin Bildiri)

8. YAPISAL MODİFİKASYONLAR İÇİN TERSİNE MÜHENDİSLİK VE TAMİR TASARIMI UYGULAMASI

ŞAHİN D. A., YURDAKUL M.

VII. ULUSLARARASI FEN, MÜHENDİSLİK VE MİMARLIK BİLİMLERİNDE AKADEMİK ÇALIŞMALAR SEMPOZYUMU, Ankara, Türkiye, 15 - 17 Kasım 2019, cilt.1, ss.128, (Özet Bildiri)

9. Application of Cellular Manufacturing and Simulation Approaches for Performance Improvement in an Aerospace Company's Manufacturing Activities

İÇ Y. T., YURDAKUL M., Gulsen M., Dalcan G., Kirdar D., Kale M., et al.

AHFE Int Conf on Adv Prod Management and Proc Control / AHFE Int Conf on Human Aspects of Adv Mfg / AHFE Int Conf on Addit Mfg, Modeling Syst and 3D Prototyping / 9th Int Conf on Appl Human Factors and Ergon, Florida, Amerika Birleşik Devletleri, 21 - 25 Temmuz 2018, cilt.793, ss.511-518, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

10. Understanding the Effect of Assignment of Importance Scores of Evaluation Criteria Randomly in the Application of DOE-TOPSIS in Decision Making

GÖKPINAR E., İÇ Y. T., YURDAKUL M.

11. Bir insan-robot etkileşimli imalat hücresinde ergonomik çalışma ortam özelliklerinin belirlenmesi

GÜNEŞ S., YURDAKUL M., İÇ Y. T.

The Proceedings of International Symposium on Industry 4.0 and Applications (ISIA 2017), Karabük, Türkiye, 12 - 14 Ekim 2017, cilt.1, ss.208-215, (Tam Metin Bildiri)

12. Akıllı fabrikaya geçişte ilk adım: Tam otomatik imalat sistemininoluşturulması

GÜNEŞ S., YURDAKUL M., İÇ Y. T.

The Proceedings of International Symposium on Industry 4.0 and Applications (ISIA 2017), Karabük, Türkiye, 12 - 14 Ekim 2017, cilt.1, ss.216-226, (Tam Metin Bildiri)

13. Akıllı Fabrikaya Geçişte İlk Adım: Tam Otomatik İmalat Sisteminin Oluşturulması

GÜNEŞ S., YURDAKUL M., İÇ Y. T.

International Symposium on Industry 4.0 and Applications-ISIA 2017, Karabük, Türkiye, 12 - 14 Ekim 2017, ss.216-226, (Tam Metin Bildiri)

14. Yeni Bir Tasarım Metodolojisi: 3D Yazdırma (3DP) Prosesine Farklı Bir Yaklaşım: XD BÖLÜMLEME (XDP)

YURDAKUL M., GÜNEŞ S., İÇ Y. T.

2. 3D Printing Teknolojileri Uluslararası Sempozyumu (3B-BTS2017), İstanbul, Türkiye, 3 - 04 Nisan 2017, ss.90-99, (Tam Metin Bildiri)

15. AN OPTIMIZATION STUDY FOR THE SURFACE QUALITY OF THE HONING PROCESS

Yurdakul M., İÇ Y. T., Gunes S.

24th International Conference on Production Research (ICPR), Posnan, Polonya, 30 Temmuz - 03 Ağustos 2017, ss.394-399, (Tam Metin Bildiri)

16. KALİTE YÖNETİM SİSTEMİNİN KURULUMUNUN SAĞLADIĞI FAYDALARIN BİR ÇKKV YÖNTEMİ OLAN TOPSIS İLE ÖLÇÜMÜ VE ANALİZ EDİLMESİ

Uluslararası Katılımlı 16. Üretim Arastırmaları Sempozyumu, İstanbul, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.546-551, (Tam Metin Bildiri)

17. A PERFORMANCE MEASUREMENT MODEL FOR MANUFACTURING COMPANIES TO DETERMINE THEIR STRENGTHS AND WEAKNESSES IN CRITICAL ACTIVITIES

International Symposium of the Analytic Hierarchy Process, Londrina, Brezilya, 4 - 07 Ağustos 2016, cilt.1, ss.117, (Özet Bildiri)

18. Improvement provided with the inclusion of fuzziness into an AHP and TOPSIS combined model in nontraditional manufacturing process selection decisions

İÇ Y. T., ATALAY K. D., YURDAKUL M.

23 rd International Conference on Production Research, Pasay City, Filipinler, 2 - 05 Ağustos 2015, (Özet Bildiri)

19. Development of a material selection support system for pressure vessel components

Balci A., YURDAKUL M., Ic Y.

Joint International Symposium on "The Social Impacts of Developments in Information, Manufacturing and Service Systems" 44th International Conference on Computers and Industrial Engineering, CIE 2014 and 9th International Symposium on Intelligent Manufacturing and Service Systems, IMSS 2014, İstanbul, Türkiye, 14 - 16 Ekim 2014, ss.1128-1137, (Tam Metin Bildiri)

Kitaplar 9

1. Design of the Assembly Systems for Airplane Structures

Yurdakul M., Iç Y. T., Çelek O. E.

Design Engineering and Science, Nam Pyo Suh,Miguel Cavique,Joseph Timothy Foley, Editör, Springer, London/Berlin , Heidelberg, ss.521-541, 2021

2. Kararsız Bulanık TOPSIS Yöntemi İle Endüstriyel Robot Seçimi

Iç Y. T., Atalay K. D., Yurdakul M.

Bulanık Çok Kriterli Karar Verme Yöntemleri, Prof. Dr. Mehmet Kabak,Doç. Dr. Babek Erdebilli, Editör, Nobel Yayın Dağıtım, Ankara, ss.129-140, 2021

3. Design of the Assembly Systems for Airplane Structures

YURDAKUL M., İÇ Y. T., Celek O. E.

Design Engineering and Science, Nam Pyo Suh, Miguel Cavique, Joseph Timothy Foley, Editör, Springer, ss.521-541, 2021

4. Kararsız Bulanık TOPSIS Yöntemi ile Endüstriyel Robot Seçimi

BULANIK ÇOK KRİTERLİ KARAR VERME YÖNTEMLERİ, Mehmet Kabak, Babek Erdebli, Editör, Nobel, Ankara, ss.129-140, 2021

5. Understanding the Effect of Assignment of Importance Scoresof Evaluation Criteria Randomly in the Applicationof DOE-TOPSIS in Decision Making

Advances in Manufacturing, Production Management and Process Control, Waldemar Karwowski , Stefan Trzcielinski, Beata Mrugalska, Massimo Di Nicolantonio, Emilio Rossi, Editör, Springer International Publishing AG, part of Springer Nature 2019, Cham, ss.411-424, 2019

6. Application of Cellular Manufacturing and SimulationApproaches for Performance Improvement in an AerospaceCompany’s Manufacturing Activities

İÇ Y. T., YURDAKUL M., GÜLŞEN M., Dalcan G., Kırdar D., Kale M., et al.

Advances in Manufacturing, Production Management and Process Control, Waldemar Karwowski, Stefan Trzcielinski, Beata Mrugalska, Massimo Di Nicolantonio, Emilio Rossi, Editör, Springer International Publishing AG, part of Springer Nature 2019, Cham, ss.511-518, 2019

7. KALİTE KONTROL SİSTEMLERİ

OTOMASYON ÜRETİM SİSTEMLERİ VE BİLGİSAYARLA TÜMLEŞİK İMALAT, MUSTAFA YURDAKUL; YUSUF TANSEL İÇ, Editör, NOBEL AKADEMİK YAYINCILIK, Ankara, ss.575-684, 2016

8. MALZEME İLETİM SİSTEMLERİ; DEPOLAMA SİSTEMLERİ; OTOMATİK TANIMLAMA VE VERİ YAKALAMA

OTOMASYON ÜRETİM SİSTEMLERİ VE BİLGİSAYARLA TÜMLEŞİK İMALAT, MUSTAFA YURDAKUL; YUSUF TANSEL İÇ, Editör, Nobel Akademik Yayıncılık, Ankara, ss.269-352, 2016

9. TALAŞLI İMALAT TEORİSİ; TALAŞLI İMALAT OPERASYONLARI VE TAKIM TEZGAHLARI; KESİCİ TAKIM TEKNOLOJİSİ; TALAŞLI İMALATTA EKONOMİ VE ÜRÜN TASARIMININ ÖNEMİ; YÜZEY İŞLEMLERİ; TÜMLEŞİK DEVRELERİN İŞLENMESİ; ELEKTRONİK MONTAJ VE PAKETLEME; MİKRO İMALAT VE NANO İMALAT TEKNOLOJİLERİ; İMALAT SİSTEMLERİ İÇİN OTOMASYON TEKNOLOJİLERİ; TÜMLEŞİK İMALAT SİSTEMLERİ; İMALAT MÜHENDİSLİĞİ; ÜRETİM PLANLAMASI VE KONTROLÜ; KALİTE KONTROL VE MUAYENE