Prof. Dr. SACHIN SOPANRAO SALUNKHE | AVESİS

Akademik Veri Yönetim Sistemi

Yayınlar & Eserler

Makaleler 154

1. Primacy of feature engineering over architectural complexity for intermittent demand forecasting

Nathan B. S., Aravinth P., Reddy B. V. S., Sastry C. C., SALUNKHE S. S., Cep R.

Scientific Reports , cilt.16, sa.1, 2026 (SCI-Expanded, Scopus)

Creative Commons License

2. CFD simulations for heat propagation analysis in containers on board ships: applications in designing hyper mist systems

Mane Deshmukh S., Kanungo S., Pal J. S., Attar A., Naidu M., Cepova L., et al.

Frontiers in Mechanical Engineering , cilt.12, 2026 (ESCI, Scopus)

3. Design and development of a flexural spindle mechanism enabled in micro drilling machine tool within a PLM environment

Shinde S. M., Solanke S., Diwan M., Bhole K. S., SALUNKHE S. S., Cep R., et al.

Frontiers in Mechanical Engineering , cilt.11, 2026 (ESCI, Scopus)

4. A novel predictive model for abrasive waterjet deep hole drilling on AL7075 T6 using machine learning and evolutionary algorithmic approach

Chandar J. B., Sivakumar M., Lenin N., Čep R., SALUNKHE S. S., Nasr E. A., et al.

Scientific Reports , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

5. Advancements in thermoacoustic technology: a comprehensive review and analysis of recent research

Gaikwad M. K., Shinde S., Dandavate A. L., Naidu M. J., Jadhav T. A., SALUNKHE S. S., et al.

International Journal of Air-Conditioning and Refrigeration , cilt.33, sa.1, 2025 (ESCI, Scopus)

6. Failure mode identification and effects analysis of mobile X-ray machine using selected MADM techniques

Sisodia V., Ganesan D., SALUNKHE S. S., Čep R., Nasr E. A.

Scientific Reports , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

7. Mechanical characterization of sisal fiber-groundnut shell powder reinforced epoxy composites

Kumar K. S., Srinivasan R. G., Palani S., Čep R., SALUNKHE S. S., Nasr E. A.

Scientific Reports , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

Creative Commons License

8. Multi-objective optimisation of drilling process variables of LM5 alloy using grey relational analysis

Juliyana S. J., Prakash J. U., Rubi C. S., SALUNKHE S. S., Cep R., Nasr E. A.

Discover Mechanical Engineering , cilt.4, sa.1, 2025 (Scopus)

9. Experimental study on polymer friction composite with natural friction modifiers for brake pads

Gore M., Bhosale A., Naidu M., Čep R., SALUNKHE S. S., Nasr E. A.

PLOS ONE , cilt.20, sa.9 September, 2025 (SCI-Expanded, Scopus)

10. Effect of microcrystalline cellulose on mechanical properties of flax-jute-epoxy hybrid composite materials using vacuum bagging

Ganesan D., Murali A. P., Salunkhe S. S., Tarigonda H., Naranje V.

Journal of Reinforced Plastics and Composites , cilt.44, sa.19-20, ss.1942-1954, 2025 (SCI-Expanded, Scopus)

11. Taguchi Optimization of Process Factors for Drilling Aluminium Alloy (LM5)

Juliyana S. J., Prakash J. U., Rubi C. S., Salunkhe S. S., Özerkan H. B.

Operations Research Forum , cilt.6, sa.3, 2025 (Scopus)

12. Investigation of wear behaviour and surface analysis of a coated H13 material for friction drilling application

Balakrishnan S., Subbaiah S., Alphonse M., Čep R., SALUNKHE S. S., Nasr E. A.

PLOS ONE , cilt.20, sa.8 August, 2025 (SCI-Expanded, Scopus)

13. Multi-objective optimization of wear parameters of hybrid composites (LM6/B4C/fly ash) using grey relational analysis

Rubi C. S., Prakash J. U., Juliyana S. J., SALUNKHE S. S., Cep R., Nasr E. A.

PLOS ONE , cilt.20, sa.6 June, 2025 (SCI-Expanded, Scopus)

14. Supervised Machine Learning and Physics Machine Learning approach for prediction of peak temperature distribution in Additive Friction Stir Deposition of Aluminium Alloy

Mishra A., Jatt V., Sefene E. M., SALUNKHE S. S., Cep R., Nasr E. A.

PLoS ONE , cilt.20, sa.4 April, 2025 (SCI-Expanded, Scopus)

15. In-situ analysis on drop in thermal performance of wind turbine gearbox system: global challenges and sustainable ideas

Sunil Kumar K., Muniamuthu S., SALUNKHE S. S., Cep R., Abouel Nasr E.

Engineering Research Express , cilt.7, sa.1, 2025 (ESCI, Scopus)

16. Optimization of PMEDM process parameters for B4C and B4C+SiC reinforced AA7075 composites

Keskin G., Salunkhe S. S., Küçüktürk G., Pul M., Gürün H., Baydaroğlu V.

Journal of Engineering Research (Kuwait) , cilt.13, sa.1, ss.47-56, 2025 (SCI-Expanded, Scopus)

17. Fault diagnosis of a CNC hobbing cutter through machine learning using three axis vibration data

Tambake N., Deshmukh B., Pardeshi S., SALUNKHE S. S., Cep R., Nasr E. A.

Heliyon , cilt.11, sa.2, 2025 (SCI-Expanded, Scopus)

18. Two-warehouse deterministic inventory model of expiry date known deteriorating items with just-in-time purchases for slotted backlogs

Thilagavathi R., Viswanath J., Mahdal M., Udaya Prakash J., SALUNKHE S. S.

Frontiers in Applied Mathematics and Statistics , cilt.11, 2025 (ESCI, Scopus)

19. Enhanced mechanical properties of AA7075 alloy through friction stir processing: a review

Patil T., Washimkar D., Pawar A., Naidu M., Shinde S., SALUNKHE S. S.

Frontiers in Mechanical Engineering , cilt.11, 2025 (ESCI, Scopus)

Creative Commons License

20. Numerical investigation of Pelton bucket geometries for performance improvement

Shah H., Chaudhari G., Dhiman V., Bhatt R., SALUNKHE S. S., Cepova L.

Frontiers in Mechanical Engineering , cilt.11, 2025 (ESCI, Scopus)

21. Studies on the anticorrosive effect of phytochemicals on mild steel, carbon steel, and stainless-steel surfaces in acid and alkali medium: A review

Sehar A. E. J. S., Ghuge A. S., Ganesan D., Cep R., SALUNKHE S. S.

Reviews on Advanced Materials Science , cilt.64, sa.1, 2025 (SCI-Expanded, Scopus)

22. Advancement of additive manufacturing technology in the development of personalized in vivo and in vitro prosthetic implants

Alex Y., Shanmugam R., SALUNKHE S. S., Čep R.

Reviews on Advanced Materials Science , cilt.64, sa.1, 2025 (SCI-Expanded, Scopus)

23. Experimental Investigation and Optimization of Process Parameters on Abrasive Water Jet Machining of Inconel X-750 Superalloy

Sisodia V., Ganesan D., Murli A. P., Mane M., SALUNKHE S. S., Kumar S.

International Journal of Automotive and Mechanical Engineering , cilt.22, sa.2, ss.12316-12331, 2025 (ESCI, Scopus)

24. Optimization of WEDM Process Parameters for Machining Hybrid Composites (LM6/B 4 C/Fly Ash)

Prakash J. U., Rubi C. S., Juliyana S. J., Salunkhe S., Ozerkan H. B., Cepova L.

Frontiers in Mechanical Engineering , cilt.10, ss.1-10, 2024 (ESCI, Scopus)

25. Implementation of preamble based GFDM prototype for robust 5G systems

Yaswanth K. n. g. b., Sivaprasad V., Prashanth N. N. A., Salunkhe S. S., Mahdal M., Gunturu C.

IET COMMUNICATIONS , cilt.18, sa.19, ss.1348-1357, 2024 (SCI-Expanded, Scopus)

26. Advances in synthesis, medicinal properties and biomedical applications of pyridine derivatives: A comprehensive review

Sahu D., Sreekanth P. R., Behera P. K., Pradhan M. K., Patnaik A., Salunkhe S. S., et al.

European Journal of Medicinal Chemistry Reports , cilt.12, 2024 (ESCI, Scopus)

27. Hot isostatic pressing of ball milled novel grade high entropy alloys at different sintering time and the investigation of their mechanical and corrosion resistance properties

Rajendrachari S., Altas E., Salunkhe S. S., Dag I. E., AVAR B., Chaira D.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , cilt.12, sa.4, 2024 (SCI-Expanded, Scopus)

28. Surface roughness prediction of AISI D2 tool steel during powder mixed EDM using supervised machine learning

Kaigude A. R., Khedkar N. K., Jatti V. S., Salunkhe S. S., Cep R., Nasr E. A.

Scientific Reports , cilt.14, sa.1, 2024 (SCI-Expanded, Scopus)

29. The Impact of Various Filling Patterns and Building Orientations on the Mechanical Characteristics and Building Time of PLA Using FDM

Hamoud M., Salunkhe S. S., Cepova L., Hussien H. M. A.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE , cilt.2024, 2024 (SCI-Expanded, Scopus)

30. Analyzing the efficacy of trimethylolpropane trioleate oil for predicting cutting power and surface roughness in high-speed drilling of Al-6061 through machine learning

Kathmore P. S., Bachchhav B. D., KAYA D., SALUNKHE S. S., Cepova L., Mizera O., et al.

PLoS ONE , cilt.19, sa.12, 2024 (SCI-Expanded, Scopus)

31. Taguchi optimization of Wire EDM process parameters for machining LM5 aluminium alloy

Juliyana S. J., Prakash J. U., Cep R., Rubi C. S., Salunkhe S. S., Sadhana A. D., et al.

PLOS ONE , cilt.19, sa.10, 2024 (SCI-Expanded, Scopus)

32. Evaluating the Piezoelectric Energy Harvesting Potential of 3D-Printed Graphene Prepared Using Direct Ink Writing and Fused Deposition Modelling

R H., Dhilipkumar T., V. Shankar K., P K., Salunkhe S. S., Venkatesan R., et al.

Polymers , cilt.16, sa.17, 2024 (SCI-Expanded, Scopus)

33. Exploring fabrication strategies and innovative applications of ionic polymer metal composites: state-of-the-art review

Ch Sridhar Y., Avvari V. D., Sahu S. K., Sreekanth P. S. R., Barick A. K., Salunkhe S. S., et al.

Engineering Research Express , cilt.6, sa.3, 2024 (ESCI, Scopus)

34. Condition monitoring of a CNC hobbing cutter using machine learning approach

Tambake N., Deshmukh B., Pardeshi S., Salunkhe S. S., Cep R., Nasr E. A.

ADVANCES IN MECHANICAL ENGINEERING , cilt.16, sa.9, 2024 (SCI-Expanded, Scopus)

35. Stiffness and stability of bamboo stem- A optimal design perspective

Sayyad M., Bachchhav B., Salunkhe S. S., Cepova L., Struz J., Abouel Nasr E., et al.

Heliyon , cilt.10, sa.16, 2024 (SCI-Expanded, Scopus)

36. Experimental investigation on solidification cracking & intergranular corrosion of AISI 321 & AISI 316 L dissimilar weld on pulsed current gas tungsten arc welding (PCGTAW)

Patil T., Bhosale A., Manikandan S., Jose B., Naidu M., Salunkhe S. S., et al.

Heliyon , cilt.10, sa.15, 2024 (SCI-Expanded, Scopus)

37. Exploring electrospun Nafion nanofibers: Bibliographic insights, emerging possibilities, and diverse applications

Avvari V. D., Sreekanth P. S. R., Shanmugam R., Salunkhe S. S., Cep R., Nasr E. A., et al.

AIP Advances , cilt.14, sa.7, 2024 (SCI-Expanded, Scopus)

Creative Commons License

38. Tensile strength analysis of additively manufactured CM 247LC alloy specimen by employing machine learning classifiers

Jatti V. S., Sawant D. A., Khedkar N. K., Jatti V. S., Salunkhe S. S., Pagáč M., et al.

PLoS ONE , cilt.19, sa.7 July, 2024 (SCI-Expanded, Scopus)

39. Electrodeposition of Zn/TiO2 coatings on Ti6Al4V produced by selective laser melting, the characterization and corrosion resistance

Gündüz D. Ö., KÜÇÜKTÜRK G., Pul M., Salunkhe S. S., KAYA D., Kabalcı M., et al.

Materials Research Express , cilt.11, sa.6, 2024 (SCI-Expanded, Scopus)

Creative Commons License

40. Advancements in robot-assisted incremental sheet hydroforming: a comparative analysis of formability, mechanical properties, and surface finish for rhomboidal and conical frustums

Singh R. P., Kumar S., Singh P. K., Meraz M., Salunkhe S. S.

International Journal of Intelligent Robotics and Applications , cilt.8, sa.2, ss.422-434, 2024 (ESCI, Scopus)

41. Wearable Assistive Rehabilitation Robotic Devices—A Comprehensive Review

Lingampally P. K., Ramanathan K. C., Shanmugam R., Cepova L., Salunkhe S. S.

Machines , cilt.12, sa.6, 2024 (SCI-Expanded, Scopus)

Creative Commons License

42. A Dynamic Traffic Light Control Algorithm to Mitigate Traffic Congestion in Metropolitan Areas

Kumar B. R., Kumaran N., Prakash J. U., Salunkhe S. S., Venkatesan R., Shanmugam R., et al.

Sensors , cilt.24, sa.12, 2024 (SCI-Expanded, Scopus)

Creative Commons License

43. Analysis of the thickness of layered armor to provide protection against 7.62 mm ball projectiles using experimental and numerical methods

Morghode D. S., Thakur D., Salunkhe S. S., Cepova L., Abouel Nasr E.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

44. Prediction of machine learning-based hardness for the polycarbonate using additive manufacturing

A. Mahmoud H., Shanmugasundar G., Vyavahare S., Kumar R., Cep R., Salunkhe S. S., et al.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

45. Experimental investigation of tungsten–nickel–iron alloy, W95Ni3.5Fe1.5, compared to copper monolithic bullets

Abhishek T., Sundeep D., Chandrasekhara Sastry C., Eswaramoorthy K., Kesireddy G. C., Siva Reddy B. V., et al.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

46. Machine learning for monitoring hobbing tool health in CNC hobbing machine

Tambake N., Deshmukh B., Pardeshi S., Mahmoud H. A., Cep R., Salunkhe S. S., et al.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

47. Numerical study on the optimized thickness of layer configuration against the 7.62 APM2 projectile

Morghode D. S., Thakur D., Salunkhe S. S., Cepova L., Abouel Nasr E.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

48. Evaluation of non-destructive testing and long-term durability of geopolymer aggregate concrete

Kumar T. U., Kumar M. V., Salunkhe S. S., Cep R.

FRONTIERS IN BUILT ENVIRONMENT , cilt.10, 2024 (ESCI, Scopus)

49. Electrical conductivity analysis of extrusion-based 3D-printed graphene

R H., Shajahan M. I., Čep R., Salunkhe S. S., Murali A. P., Sharad G., et al.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

Creative Commons License

50. Performance evaluation of looped tube thermoacoustic power generator using cyclic analysis

Gaikwad M. K., Shinde S. U., Naidu M. J., Jadhav T. A., Kumar R., Salunkhe S. S., et al.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

51. Tribological and investigation study of a dlc-coated H13 friction drilling tool on AZ31B magnesium alloy

Alphonse M., Raja V. K. B., Cepova L., Salunkhe S. S., Nasr E. A., Abdelgawad A. E.

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND , cilt.10, 2024 (ESCI, Scopus)

52. Vibration analysis of piping connected with shipboard equipment

Tripathi R., Jadhav T. A., Gaikwad M. K., Naidu M. J., Gawand A. B., Kaya D., et al.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

53. Multi-objective optimization of machining variables for wire-EDM of LM6/fly ash composite materials using grey relational analysis

Rubi C. S., Prakash J. U., Juliyana S. J., Cep R., Salunkhe S. S., Gawade S. R., et al.

Science and Engineering of Composite Materials , cilt.31, sa.1, 2024 (SCI-Expanded, Scopus)

Creative Commons License

54. Comprehensive review on wire electrical discharge machining: a non-traditional material removal process

Sarala Rubi C., Prakash J. U., Juliyana S. J., Čep R., Salunkhe S. S., Kouril K., et al.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

55. An Experimental Investigation on Machining of Hardened AISI 440C Stainless Steel Using Abrasive Water Jet Machining Process

Sisodia V., Gupta S. K., Salunkhe S. S., Murali A. P., Kumar S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, sa.2, ss.961-977, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

56. Numerical investigation on effect of different projectile nose shapes on ballistic impact of additively manufactured AlSi10Mg alloy

Naik M., Pranay V., Thakur D., Chandel S., Salunkhe S. S., Pagac M., et al.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

Creative Commons License

57. Comprehensive design and analysis of a 300L steel fuel tank for heavy off-road vehicles: numerical and experimental insights

Verma A., Shankar R., Malik Shaik A., Veera Siva Reddy B., Chandrasekhara Sastry C., Shaik N., et al.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

58. Performance improvement of set of worm gears used in soot blower through profile modification

Honkalas R., Deshmukh B., Pawar P., Salunkhe S. S., Cep R., Abouel Nasr E.

Frontiers in Mechanical Engineering , cilt.10, 2024 (ESCI, Scopus)

Creative Commons License

59. Tribological analysis of titanium alloy (Ti-6Al-4V) hybrid metal matrix composite through the use of Taguchi’s method and machine learning classifiers

Jatti V. S., Sawant D. A., Deshpande R., Saluankhe S. S., Cep R., Nasr E. A., et al.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

Creative Commons License

60. Machine learning-assisted pattern recognition algorithms for estimating ultimate tensile strength in fused deposition modelled polylactic acid specimens

Mishra A., Jatti V. S., Messele Sefene E., Jatti A. V., Sisay A. D., Khedkar N. K., et al.

Materials Technology , cilt.39, sa.1, 2024 (SCI-Expanded, Scopus)

61. Tribological investigations of hemp reinforced NAO brake friction polymer composites with varying percentage of resin loading

Naidu M., Bhosale A., Gaikwad M., Salunkhe S. S., Čep R., Abouel Nasr E.

Frontiers in Materials , cilt.11, 2024 (SCI-Expanded, Scopus)

62. Effect of MMT-HNT Hybrid Nanoclay on Properties of UHMWPE Composite

Hasan R., Pande S., Bhalerao P., Salunkhe S. S., Cep R., Nasr E. A.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE , cilt.2024, 2024 (SCI-Expanded, Scopus)

63. Development of a digital twin of heat energy storage and retrieval system for performance evaluation through AR-based simulation

Deshmukh B. B., Athavale V. A., Vernekar A. R., Katkar Y. R., Jahagirdar A. K., Waghmare Y. C., et al.

Cyber-Physical Systems , cilt.10, sa.3, ss.231-246, 2024 (Scopus)

64. Impact of geopolymer aggregate on the mechanical properties and durability characteristics of concrete

Kumar T. U., Kumar M. V., Salunkhe S. S., Cep R., Nasr E. A.

FRONTIERS IN BUILT ENVIRONMENT , cilt.10, 2024 (ESCI, Scopus)

65. Optimization of Wire EDM Process Parameters for Machining Hybrid Composites Using Grey Relational Analysis

Juliyana S. J., Prakash J. U., Rubi C. S., Salunkhe S. S., Gawade S. R., Nasr E. S. A., et al.

CRYSTALS , cilt.13, sa.11, 2023 (SCI-Expanded, Scopus)

Creative Commons License

Sürdürülebilir Kalkınma

66. Analysis of Wear Using the Taguchi Method in TiSiNOS-Coated and Uncoated H13 Tool Steel

Alphonse M., Murali A. P., Salunkhe S. S., Gawade S. R., Naveen Kumar B. V. S. G., Nasr E. A., et al.

COATINGS , cilt.13, sa.10, 2023 (SCI-Expanded, Scopus)

Creative Commons License

67. Prediction of Thrust Force and Torque for High-Speed Drilling of AL6061 with TMPTO-Based Bio-Lubricants Using Machine Learning

Kathmore P., Bachchhav B., Nandi S., Salunkhe S. S., Chandrakumar P., Nasr E. A., et al.

LUBRICANTS , cilt.11, sa.9, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

68. Mechanical Characterization and Microstructural Analysis of Stir-Cast Aluminum Matrix Composites (LM5/ZrO₂)

Prakash J. U., Juliyana S. J., Salunkhe S. S., Gawade S. R., Nasr E. S. A., Kamrani A. K.

CRYSTALS , cilt.13, sa.8, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

69. Optimization of Abrasive Water Jet Machining Process Parameters on Onyx Composite Followed by Additive Manufacturing

Ganesan D., Salunkhe S. S., Panghal D., Murali A. P., Mahalingam S., Tarigonda H., et al.

PROCESSES , cilt.11, sa.8, 2023 (SCI-Expanded, Scopus)

Creative Commons License

Sürdürülebilir Kalkınma

70. Evaluation of thermal and mechanical properties of continuous fiberglass reinforced thermoplastic composite fabricated by fused deposition modeling

Naik M., Thakur D., Salunkhe S. S.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.140, sa.26, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

71. Wear Performance of Cu-Cd, Cu-Be and Cu-Cr-Zr Spot Welding Electrode Materials

Bachchhav B. D. D., Chaitanya S. V. V., Salunkhe S. S., Chandrakumar P., Pagac M., Nasr E. A.

LUBRICANTS , cilt.11, sa.7, 2023 (SCI-Expanded, Scopus)

72. A Mathematical Model for Force Prediction in Single Point Incremental Sheet Forming with Validation by Experiments and Simulation

Singh R. P., Kumar S., Singh P. K., Meraz M., Srivastwa A. K., Salunkhe S. S., et al.

PROCESSES , cilt.11, sa.6, 2023 (SCI-Expanded, Scopus)

Creative Commons License

73. Sliding wear behaviour of salt bath nitrided 316LN austenitic stainless steel

Murali A. P., Alphonse M., Ganesan D., Salunkhe S. S., Hussein H. M. A. M.

APPLIED SURFACE SCIENCE ADVANCES , cilt.15, 2023 (ESCI, Scopus)

74. Investigation of Water Absorption Properties of 2D Interwoven Kevlar-Jute Reinforced Hybrid Laminates

Raja N. D., Anand Kumar K. V., Salunkhe S. S., Hussein H. M. A.

JOURNAL OF COMPOSITES SCIENCE , cilt.7, sa.5, 2023 (ESCI, Scopus)

75. Development of the Al₁₂SiCuFe Alloy Foam Composites with ZrSiO₄ Reinforcements at Different Foaming Temperatures

Kumar S., Kumar S., Nagpal P. K., Gawade S. R., Salunkhe S. S., Chandrasekhar U., et al.

METALS , cilt.13, sa.4, 2023 (SCI-Expanded, Scopus)

76. Electrical Efficiency Investigation on Photovoltaic Thermal Collector with Two Different Coolants

Abouel Nasr E., Mahmoud H. A., El-Meligy M. A., Awwad E. M., Salunkhe S. S., Naranje V., et al.

SUSTAINABILITY , cilt.15, sa.7, 2023 (SCI-Expanded, SSCI, Scopus)

Creative Commons License

Sürdürülebilir Kalkınma

77. Robot-Assisted Cold and Warm Incremental Sheet Forming of Aluminum Alloy 6061: A Comparative Study

Singh R. P., Kumar S., Pande S., Salunkhe S. S., Ragab A. E., Singh P. K., et al.

METALS , cilt.13, sa.3, 2023 (SCI-Expanded, Scopus)

78. Fabrication of Flapping Wing Mechanism Using Various Polymer Based 3D Printing Techniques and Aerodynamic Performance Evaluation

Balasubramanian E., Surendar G., Yang L., Wang W., Jen C., Salunkhe S. S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, sa.4, ss.1856-1873, 2023 (SCI-Expanded, Scopus)

79. ANN for design and fabrication of ENi-P-nano TiO₂ coatings on AH36 steel

Selvan R. A. S., Thakur D. G., Salunkhe S. S.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.39, sa.15, ss.2179-2190, 2023 (SCI-Expanded, Scopus)

80. Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Jatti V. S., Tamboli S., Shaikh S., Solke N. S., Gulia V., Jatti V. S., et al.

FRONTIERS IN MATERIALS , cilt.10, 2023 (SCI-Expanded, Scopus)

Creative Commons License

Sürdürülebilir Kalkınma

81. Investigation of the effect of lubricant properties of carbon nanomaterial in Cu/MWCNT composites on wear

Pul M., Yilmazel R., Erten M. Y., KÜÇÜKTÜRK G., KAYA D., Salunkhe S. S., et al.

FRONTIERS IN MATERIALS , cilt.10, 2023 (SCI-Expanded, Scopus)

82. Influence of process parameters on kerf properties of GFRP with abrasive water jet machining

Dahiya A. K., Bhuyan B. K., Kumar P., SALUNKHE S. S., Kumar S.

International Journal of Materials Engineering Innovation , cilt.14, sa.2, ss.123-135, 2023 (Scopus)

83. Experimental Study on the Effect of In/Out Radial-Finned Heat Sink with PCM under Constant and Intermittent Power Mode in Power LEDs

Ramesh T., Praveen A. S., Pillai P. B., Salunkhe S. S., Ragab A. E., Hussein H. M. A., et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY , cilt.2023, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

84. Process and dimensional variation analysis of automobile assembly in development phase using Six Sigma DMAIC

Sisodia V., SALUNKHE S. S., Pantawane P., Rajiv B., Diggi R., Raut S.

International Journal of Six Sigma and Competitive Advantage , cilt.14, sa.4, ss.437-467, 2023 (Scopus)

85. Parametric optimization of wear parameters of hybrid composites (LM6/B₄C/fly ash) using Taguchi technique

Prakash J. U., Ananth S., Juliyana S. J., Cep R., Khedkar N., Salunkhe S. S., et al.

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND , cilt.9, 2023 (ESCI, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

86. Effect of presence of holes locations and size on spring back in U bent components

Sharad G., Nandedkar V., Dharmalingam G., SALUNKHE S. S., Tarigonda H.

Materials Today: Proceedings , 2023 (Scopus)

87. 3D printing of plant fiber reinforced polymer composites (PFRC's): an insight into methods, challenges and opportunities

Salunkhe S. S., Murali A. P., Moneam H. M. A., Naranje V., Shanmugam R.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS , cilt.62, sa.6, ss.816-838, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

88. Fabrication and mechanical characterization of venturi duct using fused deposition modelling through finite element approach

Sundaram J., Rajkumar C., SALUNKHE S. S., Praveen A., Muniamuthu S., Ganesan S.

Materials Today: Proceedings , 2023 (Scopus)

89. Analysis of the aerodynamic characteristics of an ejection seat system using computational fluid dynamics

Rahman M. M., Prakash V., Chandel S., Thakur D. G., Cep R., Khedkar N., et al.

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND , cilt.9, 2023 (ESCI, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

90. Wear and Friction Analysis of Brake Pad Material Using Natural Hemp Fibers

Naidu M., Bhosale A., Munde Y., Salunkhe S. S., Hussein H. M. A.

POLYMERS , cilt.15, sa.1, 2023 (SCI-Expanded, Scopus)

91. Optimization of AWJM Process Parameters on 3D⁃Printed Onyx⁃Glass Fiber Hybrid Composite

Dharmalingam G., Prasad A. M., Panghal D., SALUNKHE S. S., Kumar S. M., Rathinasuriyan C.

Journal of Harbin Institute of Technology (New Series) , cilt.30, sa.2, ss.84-98, 2023 (Scopus)

92. Topology optimization of engine bracket arm using BESO

Srivastava S., SALUNKHE S. S., Pande S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.14, 2023 (Scopus)

Creative Commons License

93. Investigation on Effect of Radial and Extended Fins in PCM Heat Sink for LED Cooling

Ramesh T., Praveen A. S., Pillai P. B., SALUNKHE S. S., Davim J. P.

Journal of Harbin Institute of Technology (New Series) , cilt.30, sa.5, ss.89-98, 2023 (Scopus)

94. Technological Assessment on Steam Reforming Process of Crude Glycerol to Produce Hydrogen in an Integrated Waste Cooking-Oil-Based Biodiesel Production Scenario

Naranje V., Swarnalatha R., Batra O., Salunkhe S. S.

PROCESSES , cilt.10, sa.12, 2022 (SCI-Expanded, Scopus)

95. Wear Characterization of Laser Cladded Ti-Nb-Ta Alloy for Biomedical Applications

Soni R., Pande S., Kumar S., Salunkhe S. S., Natu H., Hussein H. M. A. M.

CRYSTALS , cilt.12, sa.12, 2022 (SCI-Expanded, Scopus)

96. A Convolutional Neural Network for COVID-19 Diagnosis: An Analysis of Coronavirus Infections through Chest X-rays

Mehta A. K., Swarnalatha R., Subramoniam M., Salunkhe S. S.

ELECTRONICS , cilt.11, sa.23, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

97. Effect of Load and Fiber Orientation on Wear Properties of Additively Manufactured Continuous CFRP Composites under Dry Sliding Conditions

Naik M., Thakur D. G., Chandel S., Salunkhe S. S., Hussein H. M. A.

CRYSTALS , cilt.12, sa.10, 2022 (SCI-Expanded, Scopus)

98. Correlation between the Mechanical and Tribological Properties of Rutile Reinforced LM27 Alloy Composite

Nagpal P. K., Kumar S., Sharma J. D., Mahla S. K., Salunkhe S. S., Hussein H. M. A.

LUBRICANTS , cilt.10, sa.10, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

99. An Evolutionary Algorithmic Approach for Improving the Success Rate of Selective Assembly through a Novel EAUB Method

Mahalingam S. K., Nagarajan L., Velu C., Dharmaraj V. K., Salunkhe S. S., Hussein H. M. A.

APPLIED SCIENCES-BASEL , cilt.12, sa.17, 2022 (SCI-Expanded, Scopus)

100. Mechanical Characterization and Microstructural Analysis of Hybrid Composites (LM5/ZrO₂/Gr)

Juliyana S. J., Prakash J. U., Salunkhe S. S., Hussein H. M. A., Gawade S. R.

CRYSTALS , cilt.12, sa.9, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

101. Numerical simulation of heat sinks with different configurations for high power LED thermal management

Ramesh T., Praveen A. S., Pillai P. B., SALUNKHE S. S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.13, 2022 (Scopus)

102. In Vitro and Electrochemical Characterization of Laser-Cladded Ti-Nb-Ta Alloy for Biomedical Applications

Soni R., Pande S., Salunkhe S. S., Natu H., Nasr E. A., Shanmugam R., et al.

CRYSTALS , cilt.12, sa.7, 2022 (SCI-Expanded, Scopus)

103. Tribological Performance and Rheological Properties of Engine Oil with Graphene Nano-Additives

Alqahtani B., Hoziefa W., Moneam H. M. A., Hamoud M., Salunkhe S. S., Elshalakany A. B., et al.

LUBRICANTS , cilt.10, sa.7, 2022 (SCI-Expanded, Scopus)

104. Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route

Murali A. P., Ganesan D., Salunkhe S. S., Nasr E. A., Davim J. P., Hussein H. M. A.

CRYSTALS , cilt.12, sa.7, 2022 (SCI-Expanded, Scopus)

105. Experimental investigations on thermal, flame retardant, and impact properties of additively manufactured continuous FRPC

Naik M., Thakur D., Chandel S., Salunkhe S. S.

POLYMER COMPOSITES , cilt.43, sa.5, ss.2941-2951, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

106. Meta-Heuristic Technique-Based Parametric Optimization for Electrochemical Machining of Monel 400 Alloys to Investigate the Material Removal Rate and the Sludge

Nagarajan V., Solaiyappan A., Mahalingam S. K., Nagarajan L., Salunkhe S. S., Nasr E. A., et al.

APPLIED SCIENCES-BASEL , cilt.12, sa.6, 2022 (SCI-Expanded, Scopus)

Creative Commons License

107. Microstructural evaluation of gas nitrided AISI 316 LN austenitic stainless steel

Arun Prasad M., Dharmalingam G., SALUNKHE S. S.

Materials Today: Proceedings , cilt.68, ss.1887-1890, 2022 (Scopus)

108. Development of microstructure - processing correlations of Inconel718 through additive manufacturing

Dharmalingam G., Baskar R., Arun Prasad M., SALUNKHE S. S.

Materials Today: Proceedings , cilt.68, ss.1891-1897, 2022 (Scopus)

109. Investigation of effect of electron beam melting parameters on overhang structure deformation

Ameen W., Al-Ahmari A., Ahmed N., Alshammary W., Salunkhe S. S., Hussein H. M. A.

MATERIALS TECHNOLOGY , cilt.37, sa.10, ss.1586-1593, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

110. Design and Structural Simulations of a Custom Li-Po Accumulator for Low Range, Lightweight, Single-Seater, Open Cockpit, and Open-Wheeled Racecar

Khedkar N., Bhatt A., Kapadia D., Chavan S., Agarwal Y., Abouel Nasr E., et al.

ENERGIES , cilt.15, sa.1, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

111. Experimental investigation and numerical analysis of axle spline shaft analysis for different materials

Naranje V., SALUNKHE S. S.

Materials Today: Proceedings , cilt.59, 2022 (Scopus)

112. Optimization of drilling process variables using taguchi technique for LM6 aluminium alloy

Charles S. R., Jayavelu U. P., Chinnaraj R., SALUNKHE S. S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.13, 2022 (Scopus)

Creative Commons License

113. Experimental Studies on Water-Based Al₂O₃ Nanofluid to Enhance the Performance of the Hybrid Collector

Srimanickam B., Elangovan M., Salunkhe S. S., Nasr E. A., Hussein H. M. A., Shanmugam R.

JOURNAL OF NANOMATERIALS , cilt.2022, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

114. Wear resistance performance of sheet metal die materials: a review

Chandankar P., SALUNKHE S. S., Sundaram J., Rajkumar C.

International Journal of Materials Engineering Innovation , cilt.13, sa.2, ss.87-95, 2022 (Scopus)

115. Phase change material aided thermal scheming of high power LED: Effect of PCM with varying pitch of hexagonal fins

Ramesh T., Praveen A. S., Pillai P. B., SALUNKHE S. S.

Materials Research Innovations , cilt.26, sa.6, ss.331-340, 2022 (Scopus)

116. Preface

SALUNKHE S. S., Amancio-Filho S. T., Davim J. P.

Advances in Metal Additive Manufacturing , 2022 (Scopus)

117. Optimization of advanced manufacturing processes using socio inspired cohort intelligence algorithm

SALUNKHE S. S., Guessasma S., Naranje V., Kale I. R., Pachpande M. A., Naikwadi S. P., et al.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.13, 2022 (Scopus)

Creative Commons License

118. Optimization of the Young's modulus of woven composite material made by Raphia vinifiera fiber/epoxy

SALUNKHE S. S., Guessasma S., Naranje V., Kendem Djoumessi A., Sikame Tagne R. N., Stanislas T. T., et al.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.13, ss.24-802, 2022 (Scopus)

119. Optimisation of wire EDM process parameters using Taguchi technique for machining of hybrid composites

Juliyana S. J., Prakash J. U., SALUNKHE S. S.

International Journal of Materials Engineering Innovation , cilt.13, sa.3, ss.257-271, 2022 (Scopus)

120. Corrosion and high temperature compressive strength behaviour of 17Cr ferritic ODS steel with addition of aluminium through vacuum hot pressing

Dharmalingam G., Sellamuthu P., Salunkhe S. S.

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES , cilt.8, sa.3, ss.3105-3126, 2022 (ESCI, Scopus)

121. Sheet-Metal Feature Recognition Using STEP: Database for Product Development

Gupta R. K., Salem H., Hussein H. M. A., Salunkhe S. S., Ramadan A. A. A.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS , cilt.20, sa.04, ss.815-829, 2021 (ESCI, Scopus)

122. A Novel Methodology for Simultaneous Minimization of Manufacturing Objectives in Tolerance Allocation of Complex Assembly

Nagarajan L., Mahalingam S. K., Salunkhe S. S., Nasr E. A., Davim J. P., Hussein H. M. A.

APPLIED SCIENCES-BASEL , cilt.11, sa.19, 2021 (SCI-Expanded, Scopus)

123. Optimization of Process Parameters for Turning Hastelloy X under Different Machining Environments Using Evolutionary Algorithms: A Comparative Study

Sivalingam V., Sun J., Mahalingam S. K., Nagarajan L., Natarajan Y., Salunkhe S. S., et al.

APPLIED SCIENCES-BASEL , cilt.11, sa.20, 2021 (SCI-Expanded, Scopus)

Creative Commons License

Sürdürülebilir Kalkınma

124. Harmony Search Algorithm for Minimizing Assembly Variation in Non-linear Assembly

Mahalingam S. K., Nagarajan L., Salunkhe S. S., Nasr E. A., Davim J. P., Hussein H. M. A.

APPLIED SCIENCES-BASEL , cilt.11, sa.19, 2021 (SCI-Expanded, Scopus)

Creative Commons License

125. Parametric Optimization on Impact Strength of Selective Inhibition Sintering Fabricated PA-12 Parts Based on Evolutionary Optimization Algorithms

Esakki B., Ali T. K., Rajamani D., Sachin S. S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.7, ss.5356-5367, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

126. In state of art: Mechanical behavior of natural fiber-based hybrid polymeric composites for application of automobile components

Chandgude S., Salunkhe S. S.

POLYMER COMPOSITES , cilt.42, sa.6, ss.2678-2703, 2021 (SCI-Expanded, Scopus)

127. Mechanical and wear characteristics of duplex stainless steels using Taguchi's grey relational analysis

Rajkumar C., Prakash J. U., Salunkhe S. S., Jayavelu S.

REVISTA DE METALURGIA , cilt.57, sa.2, 2021 (SCI-Expanded, Scopus)

128. Drilling of High Volume Fraction Al₂O₃ Metal Matrix Composites

Bachchhav B. D., Salunkhe S. S., Naranje V.

MATERIALS PERFORMANCE AND CHARACTERIZATION , cilt.10, sa.1, ss.317-327, 2021 (ESCI, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

129. Optimization of milling speed and time in mechanical alloying of ferritic ODS steel through taguchi technique

Dharmalingam G., Prasad M. A., SALUNKHE S. S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.12, 2021 (Scopus)

Creative Commons License

130. INVESTIGATION OF WEAR BEHAVIOUR OF DUPLEX STAINLESS STEELS (DSS) USING DESIGN OF EXPERIMENTS

Rajkumar C., Prakash J. U., Salunkhe S. S., Jayavelu S.

MATERIALS PHYSICS AND MECHANICS , cilt.47, sa.2, ss.245-253, 2021 (ESCI, Scopus)

131. Numerical simulation and experimentation of endodontic file using Taguchi DoE

Lokhande P. R., SALUNKHE S. S., Balaguru S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.12, 2021 (Scopus)

Creative Commons License

132. Binary goal programming model for optimizing tire selection using branch and bound algorithm

SALUNKHE S. S., Guessasma S., Naranje V., Aly S.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.12, 2021 (Scopus)

Creative Commons License

133. Biofiber-reinforced polymeric hybrid composites: An overview on mechanical and tribological performance

Chandgude S., Salunkhe S. S.

POLYMER COMPOSITES , cilt.41, sa.10, ss.3908-3939, 2020 (SCI-Expanded, Scopus)

134. Cement strength prediction using cloud-based machine learning techniques

Kumar N., Naranje V., Salunkhe S. S.

JOURNAL OF STRUCTURAL INTEGRITY AND MAINTENANCE , cilt.5, sa.4, ss.244-251, 2020 (ESCI, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

135. Wear resistance performance of die casting materials: A review

Chandankar P. M., SALUNKHE S. S., Chandankar V. M., Davim J. P.

Journal of Manufacturing Technology Research , cilt.12, sa.3-4, ss.175-189, 2020 (Scopus)

136. Topology optimization of steering knuckle structure

Srivastava S., SALUNKHE S. S., Pande S., Kapadiya B.

International Journal for Simulation and Multidisciplinary Design Optimization , cilt.11, 2020 (Scopus)

Creative Commons License

137. Synthesis, analysis and 3D printing of flapping mechanisms

Balasubramanian E., Chandrasekhar U., Velan S. S. S., Yang L., Salunkhe S. S.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.59, sa.3, ss.212-228, 2019 (SCI-Expanded, Scopus)

138. Experimental investigation of kerf characteristics of Kevlar 49 epoxy composite machined by abrasive water jet

Kumar P., SALUNKHE S. S., Kant R.

International Journal of Modern Manufacturing Technologies , cilt.11, sa.2, ss.13-18, 2019 (Scopus)

139. Finite element analysis, prototyping and field testing of amphibious UAV

Sheng T. K., Esakki B., Ganesan S., SALUNKHE S. S.

UPB Scientific Bulletin, Series D: Mechanical Engineering , cilt.81, sa.2, ss.125-140, 2019 (Scopus)

140. Development of light weight multi-rotor UAV structures through synergistic application of design analysis and fused deposition modelling

Balasubramanian E., Sagar N. V. S. S., Chandrasekhar U., Salunkhe S. S.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.59, sa.3, ss.229-238, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

141. Prediction of life of piercing punches using artificial neural network and adaptive neuro fuzzy inference systems

SALUNKHE S. S., Rajamani D., Balasubramanian E., Chandrasekhar U.

International Journal of Materials Engineering Innovation , cilt.10, sa.1, ss.20-33, 2019 (Scopus)

142. Prediction and analysis of surface roughness in selective inhibition sintered high-density polyethylene parts: A parametric approach using response surface methodology-grey relational analysis

Rajamani D., Ziout A., Balasubramanian E., Velu R., Sachin S. S., Mohamed H.

ADVANCES IN MECHANICAL ENGINEERING , cilt.10, sa.12, 2018 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

143. Application of artificial neural network and adaptive neuro fuzzy inference systems for prediction of life of stripper

SALUNKHE S. S., Rajamani D., Esakki B.

International Journal of Modern Manufacturing Technologies , cilt.10, sa.1, ss.76-83, 2018 (Scopus)

144. Experimental investigation of shs process variables using nsga-ii and rsm for evaluating mechanical strength characteristics of polyethylene parts

Rajamani D., Balasubramanian E., Arunkumar P., Chandrasekhar U., SALUNKHE S. S.

Journal of Manufacturing Technology Research , cilt.10, sa.1-2, ss.60-79, 2018 (Scopus)

145. Prediction of Life of Compound Die Using Artificial Neural Network

Salunkhe S. S., Kumar S., Hussein H. M. A.

AI APPLICATIONS IN SHEET METAL FORMING , ss.217-243, 2017 (SCI-Expanded)

146. Feature Extraction and Manufacturability Assessment of Sheet Metal Parts

Kumar S., Singh R., Panghal D., Salunkhe S. S., Hussein H. M. A.

AI APPLICATIONS IN SHEET METAL FORMING , ss.41-66, 2017 (SCI-Expanded)

147. An Expert System for Automatic Design of Compound Dies

Salunkhe S. S., Kumar S., Hussein H. M. A.

AI APPLICATIONS IN SHEET METAL FORMING , ss.183-216, 2017 (SCI-Expanded)

148. Rapid prototyping of flapping mechanisms for monoplane and biplane ornithopter configurations

Chandrasekhar U., Yang L., Esakki B., Suryanarayanan S., SALUNKHE S. S.

International Journal of Modern Manufacturing Technologies , cilt.9, sa.2, ss.18-22, 2017 (Scopus)

149. An expert system for process planning of sheet metal parts produced on compound die for use in stamping industries

Salunkhe S. S., Panghal D., Kumar S., Hussein H. M. A.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.41, sa.8, ss.901-907, 2016 (SCI-Expanded, Scopus)

150. Prediction of life of deep drawing die using artificial neural network

Naranje V., Kumar S., SALUNKHE S. S., Ghodke A., Hussein H.

Advances in Materials and Processing Technologies , cilt.2, sa.1, ss.132-142, 2016 (Scopus)

151. An experimental study on the influence of tool path, tool diameter and pitch in single point incremental forming (SPIF)

Jagtap R., SALUNKHE S. S., Kumar S., Hussein H.

Advances in Materials and Processing Technologies , cilt.1, sa.3-4, ss.465-473, 2015 (Scopus)

152. An automatic system for deciding bend sequence of bending parts

Panghal D., SALUNKHE S. S., Kumar S., Hussein H.

Advances in Materials and Processing Technologies , cilt.1, sa.1-2, ss.143-154, 2015 (Scopus)

153. CAD system for automatic modelling of compound dies

SALUNKHE S. S., Panghal D., Kumar S., Hussein H.

Advances in Materials and Processing Technologies , cilt.1, sa.1-2, ss.130-142, 2015 (Scopus)

154. An Expert System for Selection of Components of Compound Die

Kashid S. S., Kumar S.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS , cilt.13, sa.3, ss.181-195, 2014 (ESCI, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 16

1. Microwave Sintering of Aluminum Composite

Naranje V., SALUNKHE S. S., Shukla V. K., Sharmad P.

3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering, FLAME 2022, Noida, Hindistan, 3 - 05 Ağustos 2022, ss.67-74, (Tam Metin Bildiri)

2. Design and numerical simulation of power operated pipe bin structure

Javed H., Anjum S., Naranje V., Salunkhe S. S.

2nd International Conference on Materials and Technologies (Maerials TECH), ELECTR NETWORK, 28 - 29 Ocak 2022, ss.1743-1748, (Tam Metin Bildiri)

3. Investigation of impact strength at different infill rates biodegradable PLA constituent through fused deposition modeling

Dharmalingam G., Prasad M. A., Salunkhe S. S.

2nd International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM), Chennai, Hindistan, 16 - 17 Aralık 2021, ss.551-558, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

4. DEVELOPMENT OF A PREDICTIVE MODEL AND OPTIMIZATION FOR THE KERF PROPERTIES AND DELAMINATION LENGTH IN AWJM OF KEVLAR EPOXY COMPOSITE

Kumar P., SALUNKHE S. S., Shanmugam R., Bhuyan B. K., Dahiya A. K., Yuvaraj N.

ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, Ohio, Amerika Birleşik Devletleri, 30 Ekim - 03 Kasım 2022, cilt.3, (Tam Metin Bildiri)

5. Micro-structural and mechanical characterization of AA2014/TiB2/A1203 hybrid composites

Sundaram J., Rajkumar C., Prakash J. U., SALUNKHE S. S.

2021 International Conference on Advances in Materials and Manufacturing, ICAMM 2021, Chennai, Hindistan, 18 - 19 Şubat 2021, cilt.2395, (Tam Metin Bildiri)

6. Design of Prosthetic Finger Using Topology Optimization

Srivastava S., SALUNKHE S. S., Pande S., Naranje V.

2nd IEEE International Conference on Computational Intelligence and Knowledge Economy, ICCIKE 2021, Dubai, Birleşik Arap Emirlikleri, 17 - 18 Mart 2021, ss.127-131, (Tam Metin Bildiri)

7. Intelligent Traffic System for Sustainable Mobility

Ziyad M., Naranje V., Suresh S., Mishra V. P., SALUNKHE S. S.

2nd IEEE International Conference on Computational Intelligence and Knowledge Economy, ICCIKE 2021, Dubai, Birleşik Arap Emirlikleri, 17 - 18 Mart 2021, ss.504-507, (Tam Metin Bildiri)

8. Digital Twin for Additive Manufacturing: A Critical Tool for the Future

Ur Rehman A., Naranje V., SALUNKHE S. S., Sankaram M.

2nd IEEE International Conference on Computational Intelligence and Knowledge Economy, ICCIKE 2021, Dubai, Birleşik Arap Emirlikleri, 17 - 18 Mart 2021, ss.494-499, (Tam Metin Bildiri)

9. Experimental Evaluation of Mechanical Properties of Epoxy Based Composite Material Using Taguchi Method

Naranje V., Sankar A. R., SALUNKHE S. S., Bachchhav B. D.

International Conference on Recent Advances in Manufacturing, RAM 2020, Surat, Hindistan, 3 - 05 Temmuz 2020, ss.381-395, (Tam Metin Bildiri)

10. A Programmatic Approach for the Prediction of Service Life of Deep Drawing Die Using ANN

Naranje V., SALUNKHE S. S.

1st International Conference on Applied Mechanical Engineering Research, ICAMER 2019, Warangal, Hindistan, 2 - 04 Mayıs 2019, ss.465-473, (Tam Metin Bildiri)

11. Prediction of Life of Compound Die Punch Using Machine Learning

Salunkhe S. S., Vasarla P., Naranje V., Dharmateja M.

International Conference on Computational Intelligence and Knowledge Economy (ICCIKE), Dubai, Birleşik Arap Emirlikleri, 11 - 12 Aralık 2019, ss.647-650, (Tam Metin Bildiri)

12. Selection, modeling and prediction of life of stripper of compound die

SALUNKHE S. S., Kumar S., Hussein H. M.

16th International Conference on Sheet Metal, SheMet 2015, Erlangen-Nurnberg, Almanya, 16 - 18 Mart 2015, cilt.639, ss.501-508, (Tam Metin Bildiri)

13. Effect of Single and Double Austenitization treatments on the Microstructure and Hardness of AISI D2 Tool Steel

Salunkhe S. S., Fabijanic D., Nayak J., Hodgson P.

4th International Conference on Materials Processing and Characterzation (ICMPC), Hyderabad, Pakistan, 14 Mart 2015, ss.1901-1906, (Tam Metin Bildiri)

14. Prediction of life of compound die using artificial neural network (ANN)

SALUNKHE S. S., Kumar S.

15th International Conference on Metal Forming 2014, Palermo, İtalya, 21 - 24 Eylül 2014, cilt.622-623, ss.664-671, (Tam Metin Bildiri)

15. Prediction of Life of Die Block Using Artificial Neural Network

Kashid S. S., Kumar S.

16th International Mechanical Engineering Congress (IMEC), Tamil Nadu, Hindistan, 13 - 15 Haziran 2014, ss.689-693, (Tam Metin Bildiri)

16. An expert system for manufacturability assessment and process planning of sheet metal parts produced on compound die

SALUNKHE S. S., Kumar S.

42nd North American Manufacturing Research Conference 2014, NAMRC 2014, Michigan, Amerika Birleşik Devletleri, 9 - 13 Haziran 2014, cilt.42, ss.94-103, (Tam Metin Bildiri)

Metrikler

Yayın

172

Yayın (WoS)

126

Yayın (Scopus)

168

Atıf (WoS)

911

H-İndeks (WoS)

14

Atıf (Scopus)

1311

H-İndeks (Scopus)

16

Atıf (Scholar)

1666

H-İndeks (Scholar)

18

Proje

1

Açık Erişim

33

BM Sürdürülebilir Kalkınma Amaçları