Prof. Dr. S&#220;LEYMAN TEKELİ

Metallofizika i Noveishie Tekhnologii , cilt.34, sa.9, ss.1273-1281, 2012 (SCI-Expanded)

36. Microstructure and dry sliding wear properties of 3Si-2Ni and 3Si-2Mn powder metallurgy steels with different graphite content

Tekeli S., Gural A., Ozyurek D.

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , cilt.225, sa.8, ss.814-820, 2011 (SCI-Expanded)

37. Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling

ÖZYÜREK D., TEKELİ S.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.30, ss.175-180, 2011 (SCI-Expanded)

38. Effect of Al 2O 3 amount on microstructure and wear properties of Al-Al 2O 3 metal matrix composites prepared using mechanical alloying method

Ozyurek D., Tekeli S., Gural A., Meyveci A., Guru M.

Powder Metallurgy and Metal Ceramics , cilt.49, ss.289-294, 2010 (SCI-Expanded)

39. An Investigation on Wear Resistance of SiCp-Reinforced Aluminium Composites Produced by Mechanical Alloying Method

ÖZYÜREK D., Tekeli S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.17, sa.1, ss.31-38, 2010 (SCI-Expanded)

40. NiO / YSZ (yitriya ile kararlı hale getirilmiş zirkonya) Seramiklerin Kırılma Tokluğuna Mikro Yapının Etkisi

Aktaş B., Tekeli S., Küpeli G., Bozkurt Y., Gülsoy H. Ö., Salman S.

Afyon Kocatepe University Journal of Science , sa.1, ss.61-67, 2009 (Hakemli Dergi)

41. Production of Polymer Matrix Composite Particleboard from Pistachio Shells and Improvement of its Fire Resistance by Fly Ash

GÜRÜ M., Sahin M., Tekeli S., Tokgoz H.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.28, sa.3, ss.191-195, 2009 (SCI-Expanded)

42. The effect of silica doping on the microstructure and mechanical properties of c-ZrO2/SiO2 composites

Tekeli S., Boyacioglu T., Gural A.

Ceramics International , cilt.34, sa.8, ss.1959-1964, 2008 (SCI-Expanded)

43. Microstructural, mechanical and electrical properties of alumina-doped cubic zirconia (c-ZrO(2))

Tekeli S., Kayis A., Guru M.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY , cilt.12, ss.791-797, 2008 (SCI-Expanded)

44. Phase stability, microstructural evolution and room temperature mechanical properties of TiO2 doped 8 mol% Y2O3 stabilized ZrO2 (8Y-CSZ)

Chen T., TEKELİ S., Dillon R. P., Mecartney M. L.

CERAMICS INTERNATIONAL , cilt.34, sa.2, ss.365-370, 2008 (SCI-Expanded)

45. Microstructural design and high temperature tensile deformation behaviour of 8 mol% yttria stabilized cubic zirconia (8YCSZ) with SiO2 additions

Tekeli S., Guerue M.

CERAMICS INTERNATIONAL , cilt.34, sa.1, ss.137-140, 2008 (SCI-Expanded)

46. Processing of Cer-Met Composite Material from Zn and B2O3

Guru M., Tekeli S., Cakanyildirim C., Cabbar C.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.27, sa.4, ss.243-248, 2008 (SCI-Expanded)

47. Microstructural and electrical conductivity properties of cubic zirconia doped with various amount of titania

Tekeli S., Gürü M., Akçimen A., Gürdal O.

Journal of Achievements of Materials and Manufacturing Engineering , cilt.25, sa.2, ss.39-42, 2007 (Hakemli Dergi)

48. Microstructural Characterization of Intercritically Annealed 0.5% (wt) Ni and Mn Added Steels Prepared by Powder Metallurgy Method

Tekeli S., Güral A.

Materials Science And Technology , cilt.23, ss.72-78, 2007 (SCI-Expanded)

49. Densification and grain-growth behavior of various amounts of SiO2 doped 8YSCZ/SiO2 composites

Tekeli S., Gürü M., Saglam O. E.

MATERIALS AND MANUFACTURING PROCESSES , cilt.22, ss.710-714, 2007 (SCI-Expanded)

50. Dry sliding wear behavior of low carbon dual phase powder metallurgy steels

Tekeli S., Gural A., Ozyurek D.

Materials and Design , cilt.28, sa.5, ss.1685-1688, 2007 (SCI-Expanded)

51. Dry sliding wear behaviour of heat treated iron based powder metallurgy steels with 0.3% Graphite + 2% Ni additions

Materials and Design , cilt.28, sa.6, ss.1923-1927, 2007 (SCI-Expanded)

52. Effect of intercritical annealing and quenching plus tempering heat treatments on microstructure of Ni added powder metallurgy steels

Materials and Design , cilt.28, sa.4, ss.1353-1357, 2007 (SCI-Expanded)

53. Microstructural characterization of intercritically annealed low alloy PM steels

Gural A., Tekeli S.

Materials and Design , cilt.28, sa.4, ss.1224-1230, 2007 (SCI-Expanded)

54. Technological Development in Lost Foam Casting

YALÇIN N., KOCATEPE K., TEKELİ S.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.10, sa.2, ss.178-184, 2007 (Hakemli Dergi)

55. Sintering, phase stability and room temperature mechanical properties of c-ZrO2 ceramics with TiO2 addition

Materials and Design , cilt.28, sa.5, ss.1707-1710, 2007 (SCI-Expanded)

56. The solid solubility limit of Al2O3 and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell

MATERIALS & DESIGN , cilt.28, sa.2, ss.713-716, 2007 (SCI-Expanded)

57. High-temperature deformation behaviour of TiO2-doped 2 mol.% Y2O3-stabilized ZrO2 (8Y-CSZ) under tension and compression

Tekeli S., Chen T., Nagayama H., Sakuma T., Mecartney M. L.

CERAMICS INTERNATIONAL , cilt.33, sa.5, ss.869-874, 2007 (SCI-Expanded)

58. Tensile properties of iron-based P/M steels with ferrite plus martensite microstructure

Gural A., Tekeli S., Ando T.

JOURNAL OF MATERIALS SCIENCE , cilt.41, sa.23, ss.7894-7901, 2006 (SCI-Expanded)

59. Manufacturing of urea-formaldehyde-based composite particleboard from almond shell

Guerue M., Tekeli S., Bilici I.

MATERIALS & DESIGN , cilt.27, sa.10, ss.1148-1151, 2006 (SCI-Expanded)

60. The flexural strength, fracture toughness, hardness and densification behaviour of various amount of Al2O3-doped 8YSCZ/Al2O3 composites used as an electrolyte for solid oxide fuel cell

MATERIALS & DESIGN , cilt.27, sa.3, ss.230-235, 2006 (SCI-Expanded)

61. Microstructural characterization and impact toughness of intercritically annealed PM steels

Materials Science and Engineering A , cilt.406, ss.172-179, 2005 (SCI-Expanded)

62. Influence of alumina addition on grain growth and room temperature mechanical properties of 8YSCZ/Al2O3 composites

COMPOSITES SCIENCE AND TECHNOLOGY , cilt.65, sa.6, ss.967-972, 2005 (SCI-Expanded)

63. Fracture toughness (K-IC), hardness, sintering and grain growth behaviour of 8YSCZ/Al2O3 composites produced by colloidal processing

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.391, ss.217-224, 2005 (SCI-Expanded)

64. The factors affecting colloidal processing of 8YSCZ ceramics

Tekeli S., Guru M.

HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 , ss.729-734, 2005 (SCI-Expanded)

65. Colloidal processing, sintering and static grain growth behaviour of alumina-doped cubic zirconia

Tekeli S., Demir U.

CERAMICS INTERNATIONAL , cilt.31, sa.7, ss.973-980, 2005 (SCI-Expanded)

66. Microstructural evolution in 8 mol% Y2O3-stabilized cubic zirconia (8YSCZ) with SiO2 addition

Tekeli S., Erdogan M., Aktas B.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.386, ss.1-9, 2004 (SCI-Expanded)

67. Influence of alpha-Al2O3 addition on sintering and grain growth behaviour Of 8 mol% Y2O3-stabilised cubic zirconia (c-ZrO2)

Tekeli S., Erdogan M., Aktas B.

CERAMICS INTERNATIONAL , cilt.30, sa.8, ss.2203-2209, 2004 (SCI-Expanded)

68. High temperature ductility and cavitation behaviour of hot isostatically pressed (HIP) ZrO2/Al2O3 composite containing 40 wt.% Al2O3

CERAMICS INTERNATIONAL , cilt.29, sa.2, ss.169-174, 2003 (SCI-Expanded)

69. Effect of Y2O3 content on cavity formation in ZrO2-based ceramics

MATERIALS LETTERS , cilt.57, sa.3, ss.715-719, 2002 (SCI-Expanded)

70. The effect of martensite volume fraction and particle size on the tensile properties of a surface-carburized AISI 8620 steel with a dual-phase core microstructure

Erdogan M., Tekeli S.

MATERIALS CHARACTERIZATION , cilt.49, sa.5, ss.445-454, 2002 (SCI-Expanded)

71. Enhancement of fatigue strength of SAE 9245 steel by shot peening

MATERIALS LETTERS , cilt.57, sa.3, ss.604-608, 2002 (SCI-Expanded)

72. The effect of martensite particle size on tensile fracture of surface-carburised AISI 8620 steel with dual phase core microstructure

Erdogan M., Tekeli S.

MATERIALS & DESIGN , cilt.23, sa.7, ss.597-604, 2002 (SCI-Expanded) Sürdürülebilir Kalkınma

73. Slip casting of ZrO2-AlO3 composites and the effect of shaping process on sintering behaviour

Çetinkaya C., Tekeli S., Kurtuluş O.

INDUSTRIAL CERAMICS , cilt.22, sa.2, ss.115-120, 2002 (SCI-Expanded)

74. Surface carburised AISI 8620 steel with dual phase core microstructure

Erdogan M., Tekeli S., Pamuk O., Erkan A.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.18, sa.8, ss.840-844, 2002 (SCI-Expanded)

75. Alüminyum Alaşımlarının Kaynaklanabilirliği ve Kaynak Parametrelerin Mekanik Özelliklere ve Mikroyapıya Etkisi

Politeknik Dergisi , cilt.5, sa.4, ss.321-335, 2002 (Hakemli Dergi)

76. Cavity formation during high temperature deformation in 3YTZP (3 mol.-% yttria stabilised ZrO2)/Al2O3 composites containing 20-60 wt-%Al2O3

MATERIALS SCIENCE AND TECHNOLOGY , cilt.18, sa.1, ss.87-91, 2002 (SCI-Expanded) Sürdürülebilir Kalkınma

77. A quantitative assessment of cavities in 3 mol% yttria-stabilized tetragonal zirconia specimens containing various grain size

Tekeli S., Erdogan M.

CERAMICS INTERNATIONAL , cilt.28, sa.7, ss.785-789, 2002 (SCI-Expanded)

78. Net-shape forming of ZrO2-based ceramics and the effect of shaping process on superplastic deformation

JOURNAL OF MATERIALS SCIENCE , cilt.36, sa.8, ss.1873-1877, 2001 (SCI-Expanded)

79. A study on superplastic deformation and cavitation behavior in 3Y-TZP under changing strain rate

JOURNAL OF MATERIALS SCIENCE LETTERS , cilt.20, sa.18, ss.1707-1710, 2001 (SCI-Expanded)

80. Possible ways of entrancing high temperature ductility in CuO doped cubic zirconia (8Y-CSZ)

MATERIALS SCIENCE AND TECHNOLOGY , cilt.17, sa.1, ss.109-112, 2001 (SCI-Expanded)

81. A comparative study of superplastic deformation and cavitation behaviour in 3 and 8 mol.% yttria-stabilized zirconia

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.297, ss.168-175, 2001 (SCI-Expanded)

82. Ductility enhancement and cavitation behavior in superplastic 3Y-TZP tested at changing test temperature

JOURNAL OF MATERIALS SCIENCE LETTERS , cilt.19, sa.22, ss.2007-2010, 2000 (SCI-Expanded)

83. Influence of a transition metal oxide (CuO) on the superplastic behaviour of 8 mol% yttria-stabilised cubic zirconia polycrystal (8Y-CSZ)

JOURNAL OF MATERIALS SCIENCE , cilt.33, sa.13, ss.3267-3273, 1998 (SCI-Expanded)

84. Effect of prestraining on cavity morphology in a superplastic 3 mol% yttria-stabilized tetragonal zirconia (3Y-TZP)

SCRIPTA MATERIALIA , cilt.39, sa.1, ss.119-124, 1998 (SCI-Expanded)

85. Improvement of tensile ductility in 3 mol% yttria-stabilized tetragonal zirconia (3Y-TZP) by prestraining

Adanır M. N., Arabacı U., Tekeli S.

JOURNAL OF MATERIALS SCIENCE , cilt.33, sa.5, ss.1145-1149, 1998 (SCI-Expanded)

86. ZrO2 ve Al2O3 Seramiklerin Difüzyonla Birleştirilmesine Sıcaklığın Etkisinin İncelenmesi

TEKELİ S., ÇITAK R.

S.D.Ü. Fen Bilimleri Enstitüsü Dergisi , sa.3, 1998 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 55

1. MAG KAYNAĞI SONRASI FARKLI SOĞUTMA ORTAMLARININ SDG KAPLAMAYA ETKİSİNİN İNCELENMESİ

ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-X, 25 - 27 Haziran 2024, ss.792-799, (Tam Metin Bildiri)

2. Fabrication of Multi-Layer 316L-TiC Composite by Selective Laser Melting Additive Manufacturing

YAZDANI S., TEKELİ S., Elina Akbarzadeh C.

2nd International Scientific-Practical Conference on Machine Building and Energy: New Concepts and Technologies, MBENCT 2023, Baku, Azerbaycan, 4 - 05 Aralık 2023, cilt.148, ss.41-46, (Tam Metin Bildiri)

3. Al Si Mg Alaşımlarında Sıvı Metal Hareketinin Mekanik Özelliklere Etkisi

TUNÇAY T., TEKELİ S., ÖZYÜREK D., DİŞPINAR D.

Ulusal Alüminyum Sempozyumu ALUS'N 07, Türkiye, 8 - 09 Eylül 2015, (Tam Metin Bildiri)

4. Synthesis and mechanical properties of lanthanum oxide (La2O3)doped 8 mol % yttria-stabilized cubic zirconia (8YSZ)

Tekeli S., Aktaş B., Salman S.

International Conference on Oxide Materials for Electronic Engineering(OMEE 2012), Lviv, Ukrayna, 03 Eylül 2012, ss.101-102, (Tam Metin Bildiri)

5. Production of Composite System With Addition Al4C3 In AA2014 Matris and Researching Additives on Mechanical Properties

Topuz A., GÖKMEŞE H., BOSTAN B., TEKELİ S.

16th International Metallurgy & Materials Congress, İstanbul, Türkiye, 6 - 10 Ağustos 2012, ss.1026-1032, (Tam Metin Bildiri)

6. INFLUENCE OF La2O3 ADDITIVE CONTENT ON THE PHASE STABILITY, SINTERING AND MICROSTRUCTURE OF 8 MOL% Y2O3 STABILIZED CUBIC ZIRCONIA (8YSZ) CERAMIC USED FOR SOLID OXIDE FUEL CELL APPLICATIONS

TEKELİ S., AKTAŞ B., SALMAN S.

Symposium on Characterization of Minerals, Metals and Materials held during TMS Annual Meeting and Exhibition, Florida, Amerika Birleşik Devletleri, 11 - 15 Mart 2012, ss.269-276, (Tam Metin Bildiri)

7. Effect of Erbium Oxide (Er2O3) Amount on Phase Stability, Sintering and Microstructural Evolution of Cubic Zırconia (c-ZrO2)/Erbium Oxide (Er2O3)

Tekeli S., Aktaş B., Küçüktüvek M.

Nano Composites, 3rd International Conference on Ultrafine Grained and Nanostructured Materials, Tehran, İran, 2 - 03 Kasım 2011, ss.1-7, (Tam Metin Bildiri)

8. Equal Channel Angular Pressing (ECAP) and Its Application to Grain Refinement of Al-Zn-Mg-Cu Alloy

Tekeli S., GÜRAL A.

4th International Symposium Nanoscience and Nanotechnology Symposium (NNS), Endonezya, 23 - 25 Eylül 2011, cilt.1415, (Tam Metin Bildiri)

9. Alaşımlarında Yaşlanmanın Aşınma Davranışı ve Elektrik İletkenliğine Etkisi

Özyürek D., Tekeli S., Yılmaz R.

5. Uluslararası İleri Teknolojiler Sempozyumu, Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.770-773, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

10. SiO2/YSZ (Yitria ile Kararlı Hale Getirilmiş Zirkonya) Seramik Malzemelerin Empedans Spektroskopisi

Aktaş B., Tekeli S., Küpeli G., Sağlam N., Salman S.

Uluslararası Katılımlı VII. Seramik Kongresi, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2008, ss.482-491, (Tam Metin Bildiri)

11. Katı Oksit Yakıt Hücresi Olarak Kullanılan c-ZrO2 Seramiklerin Sinterlenebilirliğine ve Oda Sıcaklığı Mekaniksel Özelliklerine TiO2 Katkısının Etkisi

Aktaş B., Tekeli S., Salman S., Küpeli G.

14.Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 16 - 18 Ekim 2008, ss.896-903, (Tam Metin Bildiri)

12. Katı Oksit Yakıt Hücresi İçin Elektrolit Bir Malzeme Olarak Kullanılan Kübik Zirkonyanın Mikroyapısına ve Elektriksel Özelliklerine TiO2 İlavesinin Etkisi

Aktaş B., Tekeli S., Salman S.

14.Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 16 - 18 Ekim 2008, ss.977-985, (Tam Metin Bildiri)

13. Al2O3 Katkılı Kübik Zirkonyada (c-ZrO2) Sertlik, Kırılma Tokluğu (Kıc) ve Mikroyapı İlişkisi

Aktaş B., Tekeli S., Küpeli G., Bozkurt Y., Salman S.

12. Uluslararası Malzeme Sempozyumu, Denizli, Türkiye, 15 - 17 Ekim 2008, ss.73-80, (Tam Metin Bildiri)

14. Al2O3 Katkılı Kübik Zirkonyada (8YSZ) Elektriksel İletkenlik ve Mikroyapı İlişkisi

Aktaş B., Tekeli S., Küpeli G., Salman S.

12. Uluslararası Malzeme Sempozyumu, Denizli, Türkiye, 15 - 17 Ekim 2008, ss.81-87, (Tam Metin Bildiri)

15. Elektrolit Malzeme Olarak Kullanılan Kübik Zirkonya (YSZ) Seramiklerin CaO İlavesi İle Tane Sınırı İletkenliğinin Geliştirilmesi

Aktaş B., Tekeli S., Küpeli G., Bozkurt Y., Gülsoy H. Ö., Salman S.

5. Uluslararası Toz Metalurjisi Konferansı, Ankara, Türkiye, 5 - 12 Ekim 2008, ss.411-420, (Tam Metin Bildiri)

16. Microstructural and Electrical Conductivity Relationships in Alumina-Containing Yttria Stabilized Cubic Zirconia Used as a Solid Electrolyte in Solid Oxide Fuel Cells

Tekeli S., Kayış A., Gürdal O., Gürü M.

ECS Transaction 9 (1) 2007, Rio De Janeiro, Brezilya, 3 - 06 Eylül 2007, ss.505-513, (Tam Metin Bildiri)

17. Microstructural, Mechanical and Electrical Properties of Alumina-Doped Yttria-Stabilized Cubic Zirconia Ceramics Used as a Solid Electrolyte in Solid Oxide Fuel Cells

Tekeli S., Gürü M.

ICMAT 2007- International Conference on Materials for Advanced Technologies, Singapore, Singapur, 1 - 06 Temmuz 2007, ss.57-63, (Tam Metin Bildiri)

18. Microstructure and Wear Properties of Alumina Reinforced Aluminium Composites Produced by Mechanical Alloying Method

Özyürek D., Tekeli S., Güral A., Meyveci A., Gürü M.

IMMEA - 2007 International Meeting on Materials for Electronic Applications, Marrakush, Fas, 30 Nisan - 02 Mayıs 2007, ss.145-148, (Tam Metin Bildiri)

19. Microstructure-Property Relationship of c-ZrO2/SiO2 Composites with Various Amounts of SiO2 Additions

Tekeli S., Boyacıoğlu T., Güral A., Gürü M.

International Confereneces on Recent Advances in Composite Materials, New Delhi, Hindistan, 20 - 23 Şubat 2007, ss.534-540, (Tam Metin Bildiri)

20. Indentation fracture toughness and hardness of solid oxide fuel cell electrolyte material

TEKELİ S., GÜRÜ M.

4th China International Conference on High-Performance Ceramics (CICC-4), Chengdu, Çin, 23 - 26 Ekim 2005, ss.2418-2419, (Tam Metin Bildiri)

21. Effect of repeated quenching heat treatment on microstructure and dry sliding wear behavior of low carbon PM steel

GÜRAL A., TEKELİ S., Ozyorek D., GÜRÜ M.

Power Metallurgy World Congress and Exhibition 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.673-674, (Tam Metin Bildiri)

22. Processing of zinc-based MgAl2O4 composite and effect of fly ash addition

Guru M., Korcak M., Tekeli S., Gural A.

4th China International Conference on High-Performance Ceramics (CICC-4), Chengdu, Çin, 23 - 26 Ekim 2005, ss.1203-1206, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

23. Synthesis of MgB2 from anhydrous B2O3 by ball milling method and determination of superconductivity properties

GÜRÜ M., Akyuz Y., TEKELİ S.

4th China International Conference on High-Performance Ceramics (CICC-4), Chengdu, Çin, 23 - 26 Ekim 2005, ss.723-724, (Tam Metin Bildiri)

24. Influence of tempering temperature and microstructure on wear properties of low alloy PM steel with 1-2% Ni addition

TEKELİ S., GÜRAL A., GÜRÜ M.

Power Metallurgy World Congress and Exhibition 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.629-630, (Tam Metin Bildiri)

25. Manufacturing of polymer matrix composite material using marble dust and fly ash

Guru M., Tekeli S., Akin E.

4th China International Conference on High-Performance Ceramics (CICC-4), Chengdu, Çin, 23 - 26 Ekim 2005, ss.1353-1356, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

26. A Study on Dry Sliding Wear Behaviour of Sintered 3Si-2Ni and 3Si-2Mn PM Steels with Various Graphite Content

Güral A., Tekeli S., Özyürek D., Gürü M.

The 7th International Conference of The Egyption Society of Tribology, Cairo, Mısır, 27 - 28 Aralık 2006, ss.21-28, (Tam Metin Bildiri)

27. Effect of TiO2 Addition on Phase Stability and Electrical Conductivity of Nano-Structured Cubic Zirconia Used as an Solid Oxide Fuel Cells

Tekeli S., Akçimen A., Gürü M., Gürdal O.

210th ECS (Electrochemical Society) Meeting, ECS Transaction 3 (9) 2006, Cancun, Meksika, 29 Eylül - 03 Ekim 2006, ss.189-196, (Tam Metin Bildiri)

28. Densification and Grain Growth Behaviour of Various Amounts of SiO2 Doped 8YSCZ/SiO2 Composites

Tekeli S., Gürü M., Sağlam O. E.

International Composites Conference, Developments in Composites: Advanced, Infastructural, Natural and Nano-Composites, Sydney, Avustralya, 11 - 14 Temmuz 2006, ss.121-128, (Tam Metin Bildiri)

29. Effect of Ni Content on Dry Sliding Wear Behaviour of Sintered Low Carbon PM steel

Tekeli S., Güral A., Gürü M.

1st International Conference on Manufacturing and Material Processing, Kuala-Lumpur, Malezya, 14 - 16 Mart 2006, ss.317-320, (Tam Metin Bildiri)

30. The factors affecting colloidal processing of 8YSCZ ceramics

TEKELİ S., GÜRÜ M.

3rd China International Conference on High-Performance Ceramics (CICC-3), 9 - 12 Mayıs 2004, (Tam Metin Bildiri)

31. Effect of Different Heat Treatment on Microstructure of Ni Added Steels Prodeced by P/M Method

Güral A., Tekeli S., Gürü M.

Euro PM2005 Congress, Praha, Çek Cumhuriyeti, 2 - 05 Ekim 2005, ss.175-180, (Tam Metin Bildiri)

32. Effect of Various Amount of Al2O3 Addition on the Flextural Strength, Fracture Toughness and Hardness of c-ZrO2/Al2O3 Composite Used as an Electrolyte for Solis Oxide Fuel Cell

Tekeli S., Gürü M.

MS&T05 Materials Science and Technology, Pennsylvania, Amerika Birleşik Devletleri, 25 - 28 Eylül 2005, ss.141-147, (Tam Metin Bildiri)

33. Strengthening and Toughening of c-ZrO2/TiO2 Nano Composites Used as an Electrolyte Material for Solid Oxide Fuel Cell (SOFC)

Güral A., Tekeli S.

The Twelfth Annual International Conference on Composite/Nano Engineering, Tenerife, İspanya, 1 - 06 Ağustos 2005, ss.96-101, (Tam Metin Bildiri)

34. Production of Urea-Formaldehyde Based Composite Particleboard from Apricot Shell with Fly Ash Addition as a Flame Retardant

Gürü M., Tekeli S.

The Twelfth Annual International Conference on Composite/Nano Engineering, Tenerife, İspanya, 1 - 06 Ağustos 2005, ss.165-172, (Tam Metin Bildiri)

35. Wear Behaviour of Powder Metallurgy Processed Dual Phase Composite Steels

Tekeli S., Güral A.

The Twelfth Annual International Conference on Composite/Nano Engineering, Tenerife, İspanya, 1 - 06 Ağustos 2005, ss.102-108, (Tam Metin Bildiri)

36. Ara Kritik Tavlama Isıl İşlemi Uygulanmış Fe Esaslı TM Çeliklerde Nikel’in Mikroyapıya Etkisi

Güral A., Tekeli S.

4. Uluslararası Toz Metalurjisi Konferansı, Sakarya, Türkiye, 18 - 22 Mayıs 2005, ss.1122-1129, (Tam Metin Bildiri)

37. Mekanik Alaşımlandırılmış Fe-%0.4 Grafitin Mikroyapı Karakterizasyonu

Güral A., Tekeli S.

4. Uluslararası Toz Metalurjisi Konferansı, Sakarya, Türkiye, 18 - 22 Mayıs 2005, ss.447-455, (Tam Metin Bildiri)

38. Recycling of Scrap Vehicle Tyre as Elastic Surface Material

Gürü M., Tekeli S., Çubuk M. K., Çubuk M.

The First Jordanian International Conference of Materials Science and Engineering, As-Salt, Ürdün, 3 - 05 Mayıs 2005, ss.39-44, (Tam Metin Bildiri)

39. Effect of different heat treatments on microstructure of Ni added steels produced by P/M method

GÜRAL A., TEKELİ S., GÜRÜ M.

European Powder Metallurgy Congress and Exhibition, Euro PM 2005, Prague, Çek Cumhuriyeti, 2 - 05 Ekim 2005, cilt.1, ss.175-180, (Tam Metin Bildiri)

40. A study on production of dual phase structure in mechanically alloyed Fe-C-Cu system Mekanik alaşimlanmiş Fe-C-Cu sisteminde çift fazli yapi üretimine yönelik bir çalişma

GÜRAL A., TEKELİ S.

Proceedings of the 3rd International Powder Metallurgy Conference, Ankara, Türkiye, 4 - 08 Eylül 2002, ss.1016-1025, (Tam Metin Bildiri)

41. The Production of Dual phase Steel Structure in the Centre of Surface Carburized AISI 8620 Steel and Effect of Martensite Particle Size in This Structure on Tensile Properties

Erdoğan M., Tekeli S.

International Conference on Advances in Materials and Processing Technologies, Madrid, İspanya, 13 - 16 Eylül 2001, ss.117-124, (Tam Metin Bildiri)

42. Effect of Grain Size on Cavity Formation During Superplastic Deformation in 3 Mol% Yttria-Stabilized Zirconia Polycrystal

Tekeli S., Erdoğan M.

International Conference on Advances in Materials and Processing Technologies, Madrid, İspanya, 13 - 16 Eylül 2001, ss.1901-1906, (Tam Metin Bildiri)

43. Effect of Y2O3 Content on Sinterebility and Grain Growth in Zirconia-Based Ceramics

Second International Conference on Powder Metallurgy RoPM' 2000, Cluj-Napoca, Romanya, 6 - 08 Temmuz 2000, cilt.1, ss.61-65, (Tam Metin Bildiri)

44. Effect of Processing Parameters and Milling Time on Slip Casting and Densification of ZrO2 Al2O3 Composites

Tekeli S., Güral A., Bostan B.

Second International Conference on Powder MEtallurgy, Cluj-Napoca, Romanya, 6 - 08 Temmuz 2000, cilt.1, ss.55-60, (Tam Metin Bildiri)

45. Çelik ve Gri Dökme Demirde Seramik Filtre Kullanarak Kalıntı Filtrasyonunun Yorulma Özelliğine Etkisi

Tekeli S., Özyürek D.

10. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 24 - 28 Mayıs 2000, ss.1179-1184, (Tam Metin Bildiri)

46. Investigation of Bonding and Bending Strength of TZP/Al2O3 Composites Diffusion Bonded with Similar or Dissimilar Materials

Tekeli S., Çetinkaya C.

10. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 24 - 28 Mayıs 2000, ss.1863-1866, (Tam Metin Bildiri)

47. Bilyalı Dövme işleminin SAE 9245 ve 9260 Çeliklerinin Yorulma Mukavemetine Etkisi

Tekeli S., Saritaş S.

10. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 24 - 28 Mayıs 2000, ss.1195-1200, (Tam Metin Bildiri)

48. Alüminanın Düşük Sıcaklık Sinterlemesi

Uluslararası Katılımlı 2. Toz Metalurjisi Konferansı, Ankara, Türkiye, 15 - 17 Eylül 1999, ss.489-492, (Tam Metin Bildiri)

49. Developments of Ceramic Net-Shape Forming Methods

Uluslararası Katılımlı 2. Toz Metalurjisi Konferansı, Ankara, Türkiye, 15 - 17 Eylül 1999, ss.121-125, (Tam Metin Bildiri)

50. Applications of ceramic superplasticity

IV. SERAMIK KONGRESI, Eskişehir, Türkiye, 22 - 25 Eylül 1998, ss.375-379, (Tam Metin Bildiri)

51. Static and dynamic grain growth during superplastic deformation of yttria-stabilized tetragonal zirconia polycrystals

IV. SERAMIK KONGRESI, Eskişehir, Türkiye, 22 - 25 Eylül 1998, ss.381-386, (Tam Metin Bildiri)

55. The Effect of Strain Rate and Testing Temperature On Cavitation in Superplastic 3 mol % Yttria-Stabilized Tetragonal Zirconia (3Y-TZP)