Prof.Dr. METİN G&#220;R&#220;

Akkas Boynuegri T., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.37, sa.1, ss.423-437, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

The effects of particle mass fraction and static magnetic field on the thermal performance of NiFe2O4 nanofluid in a heat pipe

Aydın D. Y., Aydin E., GÜRÜ M.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.183, 2022 (SCI-Expanded)

Extraction and quantification of some valuable flavonoids from pinecone of Pinus brutia via Soxhlet and Supercritical CO2 extraction: a comparison study

NURALIN L., GÜRÜ M., ÇETE S.

CHEMICAL PAPERS , cilt.75, sa.10, ss.5363-5373, 2021 (SCI-Expanded)

Combustion, performance and emission analyses of organic Manganese-Added crambe abyssinica biodiesel in a direct injection diesel engine

Uyaroglu A., GÜRÜ M., Kocakulak T., Uyumaz A., SOLMAZ H.

FUEL , cilt.297, 2021 (SCI-Expanded)

INVESTIGATION OF SYNTHESIS PARAMETERS OF ANTIMONY FLUOROBORATE AND ITS USABILITY AS A FLAME RETARDANT FOR CELLULOSIC FABRICS

Aydin D. Y., GÜRÜ M., AKKURT F.

CELLULOSE CHEMISTRY AND TECHNOLOGY , cilt.55, sa.7-8, ss.893-900, 2021 (SCI-Expanded)

The Impacts of Nanoparticle Concentration and Surfactant Type on Thermal Performance of A Thermosyphon Heat Pipe Working With Bauxite Nanofluid

Yilmaz Aydin D., ÇİFTÇİ E., GÜRÜ M., SÖZEN A.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.43, sa.12, ss.1524-1548, 2021 (SCI-Expanded)

The Effects of Triton X-100 and Tween 80 Surfactants on the Thermal Performance of a Nano-Lubricant: An Experimental Study

Akkaya M., MENLİK T., SÖZEN A., GÜRÜ M.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY , cilt.8, sa.3, ss.955-967, 2021 (SCI-Expanded)

Investigation of the effects of base fluid type of the nanofluid on heat pipe performance

Aydin D. Y., Gürü M., Sözen A., Çiftçi E.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY , cilt.235, sa.1, ss.124-138, 2021 (SCI-Expanded)

RELEASING HYDROGEN FROM NABH(4) VIA HYDROGEL BASED CoF2 CATALYST

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.41, sa.1, ss.1-9, 2021 (SCI-Expanded)

Determination of soxhlet extraction conditions of silibinin and rutin components in Juniperus excelsa M. Bieb fruits using experimental design method

NURALIN L., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.4, ss.1775-1784, 2021 (SCI-Expanded)

Investigation of Mechanical Properties of AA7075 Alloys Aged by Various Heat Treatments

Sunar T., Tuncay T., Ozyurek D., GÜRÜ M.

PHYSICS OF METALS AND METALLOGRAPHY , cilt.121, sa.14, ss.1440-1446, 2020 (SCI-Expanded)

Investigation of the influences of kaolin-deionized water nanofluid on the thermal behavior of concentric type heat exchanger

Khanlari A., Aydin D. Y., SÖZEN A., GÜRÜ M., VARİYENLİ H. İ.

HEAT AND MASS TRANSFER , cilt.56, sa.5, ss.1453-1462, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of Milling Time on Dry Sliding Wear Behaviors of Carbon Nanotubes Reinforced Al Matrix Composites

TAŞDEMİR H. M., ŞAHİN A., Karabulut A. F., GÜRÜ M.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY , cilt.20, sa.4, ss.2633-2638, 2020 (SCI-Expanded)

EXPERIMENTAL INVESTIGATION ON THERMAL PERFORMANCE OF THERMOSYPHON HEAT PIPE USING DOLOMITE/DEIONIZED WATER NANOFLUID DEPENDING ON NANOPARTICLE CONCENTRATION AND SURFACTANT TYPE

Aydin D. Y., GÜRÜ M., SÖZEN A.

HEAT TRANSFER RESEARCH , cilt.51, sa.11, ss.1073-1085, 2020 (SCI-Expanded)

EXPERIMENTAL INVESTIGATION OF NANOLUBRICANT USAGE IN A COOLING SYSTEM AT DIFFERENT NANOPARTICLE CONCENTRATIONS

Akkaya M., MENLİK T., SÖZEN A., GÜRÜ M.

HEAT TRANSFER RESEARCH , cilt.51, sa.10, ss.949-965, 2020 (SCI-Expanded)

Investigation of rheological and mechanical properties of kaolin-clay modified bitumen

Arslan D., GÜRÜ M., ÇUBUK M. K., Cubuk M., Farshbafian F. K.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.3, ss.1409-1419, 2020 (SCI-Expanded)

Experimental and numerical study on enhancement of heat transfer characteristics of a heat pipe utilizing aqueous clinoptilolite nanofluid

Sözen A., Gürü M., Khanlari A., Çiftçi E.

APPLIED THERMAL ENGINEERING , cilt.160, 2019 (SCI-Expanded)

Obtainment of Copper(II) Fluoroborate by High-Energy Impacted Ball-Milling

Aydin D. Y., Guru M., Ipek D., Ozyurek D.

ACTA PHYSICA POLONICA A , cilt.135, sa.5, ss.888-891, 2019 (SCI-Expanded)

PRODUCTION OF USEFUL COMPOSITE PARTICLEBOARD FROM WASTE ORANGE PEEL

CELLULOSE CHEMISTRY AND TECHNOLOGY , cilt.53, ss.517-526, 2019 (SCI-Expanded)

The Effect of Milling Time on Microstructure and Wear Behaviours of AISI 304 Stainless Steel Produced by Powder Metallurgy

Yavuzer B., Ozyurek D., Guru M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.735-738, 2019 (SCI-Expanded)

Influences of bentonite-deionized water nanofluid utilization at different concentrations on heat pipe performance: An experimental study

Guru M., SÖZEN A., Karakaya U., ÇİFTÇİ E.

APPLIED THERMAL ENGINEERING , cilt.148, ss.632-640, 2019 (SCI-Expanded)

Extraction of phytosterols from melon (Cucumis melo) seeds by supercritical CO2 as a clean technology

Ekinci M. S., GÜRÜ M.

GREEN PROCESSING AND SYNTHESIS , cilt.8, sa.1, ss.677-682, 2019 (SCI-Expanded)

PERFORMANCE IMPROVEMENT OF THE HEAT RECOVERY UNIT WITH SEQUENTIAL TYPE HEAT PIPES USING TiO2 NANOFLUID

ÖZTÜRK A., ÖZALP M., SÖZEN A., GÜRÜ M.

THERMAL SCIENCE , cilt.23, sa.3, ss.1755-1764, 2019 (SCI-Expanded)

COMPARISON BETWEEN HEAT TRANSFER CHARACTERISTICS OF TiO2/DEIONIZED WATER AND KAOLIN/DEIONIZED WATER NANOFLUIDS IN THE PLATE HEAT EXCHANGER

Khanlari A., SÖZEN A., VARİYENLİ H. İ., GÜRÜ M.

HEAT TRANSFER RESEARCH , cilt.50, sa.5, ss.435-450, 2019 (SCI-Expanded)

INVESTIGATION OF PYROLYSIS OF WASTE POLYETHYLENE (PE) AND EFFECTS ON DIESEL ENGINE AND EMISSION PARAMETERS

BİLİCİ İ., GÜRÜ M., KESKİN A.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.39, sa.1, ss.51-58, 2019 (SCI-Expanded)

Investigation of the properties of composite material produced from mint fiber added waste palm kernel

TAŞDEMİR H. M., ŞAHİN A., Karabulut A. F., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, sa.1, ss.409-420, 2019 (SCI-Expanded)

Synthesis and characterization of sodium borohydride and a novel catalyst for its dehydrogenation

AR İ., Guler O. U., GÜRÜ M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.44, ss.20214-20233, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of chicken feather and boron compounds as filler on mechanical and flame retardancy properties of polymer composite materials

Kuru D., Borazan A. A., Guru M.

WASTE MANAGEMENT & RESEARCH , cilt.36, sa.11, ss.1029-1036, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Determination of Mass Transfer Coefficients on the Obtaining of Caffeine from Tea Stalk by Supercritical Carbon Dioxide With and Without Ethanol

İÇEN H., GÜRÜ M.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.43, sa.5, ss.2257-2262, 2018 (SCI-Expanded)

Improving the aging resistance of bitumen by addition of polymer based diethylene glycol

Calisici M., GÜRÜ M., Cubak M. K., CANSIZ Ö. F.

CONSTRUCTION AND BUILDING MATERIALS , cilt.169, ss.283-288, 2018 (SCI-Expanded)

Experimental comparison of Triton X-100 and sodium dodecyl benzene sulfonate surfactants on thermal performance of TiO2-deionized water nanofluid in a thermosiphon

SÖZEN A., GÜRÜ M., MENLİK T., Karakaya U., ÇİFTÇİ E.

EXPERIMENTAL HEAT TRANSFER , cilt.31, sa.5, ss.450-469, 2018 (SCI-Expanded)

Improvement of bitumen performance properties with nano magnesium spinel and colemanite

Ocal A., GÜRÜ M., KARACASU M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.3, ss.939-951, 2018 (SCI-Expanded)

USAGE OF A DIATOMITE-CONTAINING NANOFLUID AS THE WORKING FLUID IN A WICKLESS LOOP HEAT PIPE: EXPERIMENTAL AND NUMERICAL STUDY

SÖZEN A., ÇİFTÇİ E., KEÇEL S., GÜRÜ M., VARİYENLİ H. İ., Karakaya U.

HEAT TRANSFER RESEARCH , cilt.49, sa.17, ss.1721-1744, 2018 (SCI-Expanded)

Synthesis and Characterization of Zinc Fluoroborate from Zinc Fluoride and Boron by Mechanochemical Reaction

Aydin D. Y., GÜRÜ M., Ipek D., ÖZYÜREK D.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.10, ss.4409-4416, 2017 (SCI-Expanded)

Conversion of KCl into KBH4 by Mechano-Chemical Reaction and its Catalytic Decomposition

Bilen M., GÜRÜ M., ÇAKANYILDIRIM Ç.

JOURNAL OF ELECTRONIC MATERIALS , cilt.46, sa.7, ss.4126-4132, 2017 (SCI-Expanded)

A new approach to the manufacturing of elemental boron from boron oxide by carbon monoxide

GÖKDAİ D., GÜRÜ M., Togrul T.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, sa.28, ss.18028-18033, 2017 (SCI-Expanded)

Catalytic dehydrogenation of calcium borohydride by using hydrogel catalyst

Boynuegri T. A., GÜRÜ M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, sa.28, ss.17869-17873, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Effects of Sugar Beet Molasses and Molasses-Based Boron Oxide Compound on Bitumen Properties

GÜRÜ M., Cubuk M. K., Arslan D., Aminbakhsh S.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.29, sa.4, 2017 (SCI-Expanded)

Mechanical and Thermal Properties of Particleboard Manufactured from Waste Peachnut Shell with Glass Powder

ŞAHİN A., TAŞDEMİR H. M., Karabulut A. F., GÜRÜ M.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.4, ss.1559-1568, 2017 (SCI-Expanded)

Utilization of blast furnace slag nano-fluids in two-phase closed thermos-syphon heat pipes for enhancing heat transfer

SÖZEN A., Guru M., Menlik T., Aktas M.

EXPERIMENTAL HEAT TRANSFER , cilt.30, sa.2, ss.112-125, 2017 (SCI-Expanded)

UPGRADING THE THERMAL PERFORMANCE OF PARALLEL AND CROSS-FLOW CONCENTRIC TUBE HEAT EXCHANGERS USING MgO NANOFLUID

SÖZEN A., VARİYENLİ H. İ., ÖZDEMİR M. B., GÜRÜ M.

HEAT TRANSFER RESEARCH , cilt.48, sa.5, ss.419-434, 2017 (SCI-Expanded)

Effect of Sintering Time on Hardness and Wear Behaviours of Carbon Nanotubes Reinforced Aluminium Matrix Composites

YILDIRIM M., Ozyurek D., Guru M.

ACTA PHYSICA POLONICA A , cilt.131, sa.1, ss.92-95, 2017 (SCI-Expanded)

Optimisation of quercetin amount via response surface methodology for elaeagnus seeds by supercritical CO2 extraction method

NURALIN L., Tosun A., EROL F., Akgun F. B., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.32, sa.4, ss.1233-1241, 2017 (SCI-Expanded)

Decomposition of NaBH4 with self-regeneration of carbon-supported CoCl2 catalyst

INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.14, sa.12, ss.1005-1010, 2017 (SCI-Expanded)

Upgrading of the thermal performance of two-phase closed thermosyphon (TPCT) using fusel oil

SÖZEN A., MENLİK T., GÜRÜ M., AKTAŞ M.

HEAT AND MASS TRANSFER , cilt.53, sa.1, ss.141-149, 2017 (SCI-Expanded)

The Effects of Precipitate Size on the Hardness and Wear Behaviors of Aged 7075 Aluminum Alloys Produced by Powder Metallurgy Route

Karabulut A. F., GÜRÜ M., Boynuegri T. A., Aydin M. Y.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.41, sa.11, ss.4273-4281, 2016 (SCI-Expanded)

Investigation of the effects of organic based manganese addition to biodiesel on combustion and exhaust emissions

Celik M., YÜCESU H. S., GÜRÜ M.

FUEL PROCESSING TECHNOLOGY , cilt.152, ss.83-92, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Evaluation of Biodiesel Production, Engine Performance, and Emissions

GÜRÜ M., KESKİN A.

JOURNAL OF ELECTRONIC MATERIALS , cilt.45, sa.8, ss.3882-3888, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Synthesis of Ca(BH4)(2) from Synthetic Colemanite Used in Hydrogen Storage by Mechanochemical Reaction

JOURNAL OF ELECTRONIC MATERIALS , cilt.45, sa.8, ss.3957-3963, 2016 (SCI-Expanded)

Heat transfer enhancement using alumina and fly ash nanofluids in parallel and cross-flow concentric tube heat exchangers

SÖZEN A., VARİYENLİ H. İ., ÖZDEMİR M. B., GÜRÜ M., Aytac I.

JOURNAL OF THE ENERGY INSTITUTE , cilt.89, sa.3, ss.414-424, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Synthesis of Borohydride and Catalytic Dehydrogenation by Hydrogel Based Catalyst

Boynuegri T. A., Karabulut A. F., GÜRÜ M.

JOURNAL OF ELECTRONIC MATERIALS , cilt.45, sa.8, ss.3949-3956, 2016 (SCI-Expanded)

Improving the Thermal Performance of Parallel and Cross-Flow Concentric Tube Heat Exchangers Using Fly-Ash Nanofluid

SÖZEN A., VARİYENLİ H. İ., ÖZDEMİR M. B., GÜRÜ M.

HEAT TRANSFER ENGINEERING , cilt.37, sa.9, ss.805-813, 2016 (SCI-Expanded)

Utilization of Fly Ash Nanofluids in Two-phase Closed Thermosyphon for Enhancing Heat Transfer

SÖZEN A., Menlik T., Guru M., Irmak A. F., Kilic F., Aktas M.

EXPERIMENTAL HEAT TRANSFER , cilt.29, sa.3, ss.337-354, 2016 (SCI-Expanded)

A comparative investigation on the effect of fly-ash and alumina nanofluids on the thermal performance of two-phase closed thermo-syphon heat pipes

SÖZEN A., MENLİK T., GÜRÜ M., BORAN K., KILIÇ F., AKTAŞ M., et al.

APPLIED THERMAL ENGINEERING , cilt.96, ss.330-337, 2016 (SCI-Expanded)

Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES , cilt.24, sa.7, ss.467-473, 2016 (SCI-Expanded)

SYNTHESIS AND CHARACTERIZATION OF ELEMENTAL BORON FROM BORON OXIDE BY MECHANOCHEMICAL METHOD

GÖKDAİ D., GÜRÜ M., TOĞRUL T.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.2, ss.425-433, 2016 (SCI-Expanded)

EFFECT OF PAINT PROPERTIES ON RADAR ABSORPTION CAPACITY

Aktas G., Aktas A. R., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.31, sa.1, ss.87-93, 2016 (SCI-Expanded)

Synthesis of LiBH4 from LiBO2 as hydrogen carrier and its catalytic dehydrogenation

Bilen M., Yilmaz O., GÜRÜ M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.40, sa.44, ss.15213-15217, 2015 (SCI-Expanded)

Absorption of combustion gases in boron solutions and recovery as industrial products

Yilmaz O., Bilen M., GÜRÜ M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.40, sa.44, ss.15352-15357, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma

The potential of poppy (Papaver somniferum Linnaeus) husk for manufacturing wood-based particleboards

KESKİN H., Kucuktuvek M., GÜRÜ M.

CONSTRUCTION AND BUILDING MATERIALS , cilt.95, ss.224-231, 2015 (SCI-Expanded)

Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk

GÜRÜ M., Karabulut A. F., Aydin M. Y., Bilici I.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.34, sa.6, ss.599-604, 2015 (SCI-Expanded)

Heat transfer enhancement using MgO/water nanofluid in heat pipe

MENLİK T., SÖZEN A., GÜRÜ M., Oztas S.

JOURNAL OF THE ENERGY INSTITUTE , cilt.88, sa.3, ss.247-257, 2015 (SCI-Expanded)

Extraction of oil and silybin compounds from milk thistle seeds using supercritical carbon dioxide

Celik H. T., GÜRÜ M.

JOURNAL OF SUPERCRITICAL FLUIDS , cilt.100, ss.105-109, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma

Effects of fly ash and boric acid on Y2O3-stabilized tetragonal ZrO2 dispersed with MgAl2O4: An experimental study on rat subcutaneous tissue

ERGÜN G., GÜRÜ M., EĞİLMEZ F., ÇEKİÇ NAGAŞ I., Yilmaz D.

ANNALS OF ANATOMY-ANATOMISCHER ANZEIGER , cilt.199, ss.23-29, 2015 (SCI-Expanded)

ALTERNATIVE ENERGY STORAGE KEY COMPONENT TRIMETHYL BORATE: SYNTHESIS, DEHYDRATION AND KINETIC PARAMETERS

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.35, sa.1, ss.53-57, 2015 (SCI-Expanded)

Improving the thermal performance of diffusion absorption refrigeration system with alumina nanofluids: An experimental study

SÖZEN A., ÖZBAŞ E., MENLİK T., Cakir M. T., GÜRÜ M., BORAN K.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.44, ss.73-80, 2014 (SCI-Expanded)

An approach to the usage of polyethylene terephthalate (PET) waste as roadway pavement material

GÜRÜ M., ÇUBUK M. K., Arslan D., Farzanian S. A., BİLİCİ İ.

JOURNAL OF HAZARDOUS MATERIALS , cilt.279, ss.302-310, 2014 (SCI-Expanded)

Extraction of oil and beta-sitosterol from peach (Prunus persica) seeds using supercritical carbon dioxide

Ekinci M. S., GÜRÜ M.

JOURNAL OF SUPERCRITICAL FLUIDS , cilt.92, ss.319-323, 2014 (SCI-Expanded)

Rheological Properties and Performance Evaluation of Phenol Formaldehyde Modified Bitumen

Cubuk M., GÜRÜ M., ÇUBUK M. K., Arslan D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.26, sa.6, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

DETERMINATION OF RHEOLOGICAL PROPERTIES OF ZINC BORATE REINFORCED POLYPROPYLENE

GÜLDAŞ A., Cankaya A., GÜLLÜ A., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.29, sa.2, ss.227-234, 2014 (SCI-Expanded)

Preventing of rutting and crackings in the bituminous mixtures by monoethylene and diethylene glycol based synthetic polyboron compounds

Bilen M., GÜRÜ M., ÇAKANYILDIRIM Ç.

CONSTRUCTION AND BUILDING MATERIALS , cilt.50, ss.102-107, 2014 (SCI-Expanded)

CLEANING UP OIL SPILLS ON WATER SURFACE WITH WASTES OF GRANULAR STYROFOAM, TEA FIBERS AND POLYSTYRENE FOAM

Cubuk M., GÜRÜ M., Ugurlu E. L.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.29, sa.2, ss.281-287, 2014 (SCI-Expanded)

PRODUCTION OF BORON CARBIDE BY MECHANOCHEMICAL METHOD AND INVESTIGATION OF USABILITY ON THE ALUMINIUM BASED COMPOSITE MATERIAL

Arslan D., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.4, ss.875-883, 2013 (SCI-Expanded)

INVESTIGATION OF DESIGNING, MANUFACTURING AND PERFORMANCE OF DOUBLE-GROOVED PARABOLIC TROUGH- TYPE SOLAR COLLECTOR

Ercoskun G. T., KESKİN A., GÜRÜ M., ALTIPARMAK D.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.4, ss.855-863, 2013 (SCI-Expanded)

INFLUENCE OF TITANIUM BASED FUEL ADDITIVE ON DIESEL ENGINE PERFORMANCE AND EMISSIONS

KESKİN A., Ocakoglu K., REŞİTOĞLU İ. A., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.3, ss.671-676, 2013 (SCI-Expanded)

Role of NaCl in NaBH4 production and its hydrolysis

ENERGY CONVERSION AND MANAGEMENT , cilt.72, ss.134-140, 2013 (SCI-Expanded)

IMPROVEMENT OF PROPERTIES OF BITUMEN BY ORGANIC-BASED MAGNESIUM ADDITIVE

Cubuk M., GÜRÜ M., ÇUBUK M. K., Arslan D.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.2, ss.257-264, 2013 (SCI-Expanded)

Effects of trout-oil methyl ester on a diesel engine performance and emission characteristics

BÜYÜKKAYA E., Benli S., KARAASLAN S., GÜRÜ M.

ENERGY CONVERSION AND MANAGEMENT , cilt.69, ss.41-48, 2013 (SCI-Expanded)

ISOLATION, INHIBITION AND KINETIC MODELLING OF ALKALINE PHOSPHATASE (ALP) ENZYME

Durak Z. E., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.1, ss.209-215, 2013 (SCI-Expanded)

Improvement of hot mix asphalt performance in cold regions by organic-based synthetic compounds

COLD REGIONS SCIENCE AND TECHNOLOGY , cilt.85, ss.250-255, 2013 (SCI-Expanded)

Performance assessment of organic-based synthetic calcium and boric acid modified bitumens

FUEL , cilt.102, ss.766-772, 2012 (SCI-Expanded)

IMPROVEMENT OF BITUMEN AND BITUMINIOUS MIXTURES PERFORMANCE PROPERTIES WITH ORGANIC BASED ZINCPHOSPHATE COMPOUND

Cakanyildirim C., Guru M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.2, ss.459-466, 2012 (SCI-Expanded)

The Optimization of Electricity Production from Geothermal Sources by a Binary System

Guru M., Kapulluoglu A.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.34, ss.278-286, 2012 (SCI-Expanded)

The Processing of NaBH4 from Na2B4O7 by Mechano-chemical Synthesis and Its Catalytic Dehydrogenation

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.34, sa.12, ss.1104-1113, 2012 (SCI-Expanded)

Electricity production from geothermal sources by binary system; choosing secondary fluids

Kapulluoglu A., GÜRÜ M.

INTERNATIONAL JOURNAL OF EXERGY , cilt.11, sa.1, ss.112-118, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

The Optimization of the Esterification Reaction in Biodiesel Production from Trap Grease

Resitoglu I. A., Keskin A., Guru M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.34, sa.13, ss.1238-1248, 2012 (SCI-Expanded)

INVESTIGATION OF BORON AND ARSENIC POLLUTION IN KUTAHYA-EMET REGION UNDERGROUND WATER SAMPLES

Uenlue M. I., Bilen M., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.4, ss.753-760, 2011 (SCI-Expanded)

USABILITY OF FLY ASH AND BORIC ACID IN THE PRODUCTION OF ANORTHITE CERAMIC METERIAL

Aydogan U., Bilen M., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.4, ss.761-769, 2011 (SCI-Expanded)

Improvement of bitumen and bituminous mixtures performances by triethylene glycol based synthetic polyboron

Arslan D., GÜRÜ M., ÇUBUK M. K., Cubuk M.

CONSTRUCTION AND BUILDING MATERIALS , cilt.25, sa.10, ss.3863-3868, 2011 (SCI-Expanded)

INVESTIGATION OF VISCOSITY OF HEAVY FUEL OIL WITH MANGANESE ADDITIVE AND TEMPERATURE

GÜRÜ M., Bilici I., Arslan D.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.3, ss.631-634, 2011 (SCI-Expanded)

IMPROVEMENT OF PERFORMANCE AND EMISSION CRITERIAS OF PETRODIESEL AND RAPESEED OIL BIODIESEL WITH MANGANESE BASED ADDITIVE

Celikten I., GÜRÜ M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.3, ss.643-648, 2011 (SCI-Expanded) Sürdürülebilir Kalkınma

THE EFFECT OF POLYTETRAFLUOROETHYLENE ON THE RHEOLOGICAL PROPERTIES OF BITUMEN

Cubuk M., GÜRÜ M., ÇUBUK M. K.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.26, sa.3, ss.623-630, 2011 (SCI-Expanded)

Synthesis of Magnesium Borohydride from Its Elements and Usage in the Hydrogen Cycle

Kaya S., Guru M., Ar I.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.33, sa.23, ss.2157-2170, 2011 (SCI-Expanded)

The Production of NaBH4 from Its Elements by Mechano-chemical Reaction and Usage in Hydrogen Recycle

Cakanyildirim C., Guru M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.33, sa.20, ss.1912-1920, 2011 (SCI-Expanded)

Development of Low Cost Heterogeneous Catalysts for Biodiesel Processes

Balbasi M., Bartan A., Ar I., Guru M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.33, sa.11, ss.1035-1047, 2011 (SCI-Expanded) Sürdürülebilir Kalkınma

The Effects of Ethanol and Propanol Additions Into Unleaded Gasoline on Exhaust and Noise Emissions of a Spark Ignition Engine

Keskin A., Guru M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.33, sa.23, ss.2194-2205, 2011 (SCI-Expanded)

Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine

KESKİN A., GÜRÜ M., ALTIPARMAK D.

ENERGY CONVERSION AND MANAGEMENT , cilt.52, sa.1, ss.60-65, 2011 (SCI-Expanded)

Usage of methyl ester of tall oil fatty acids and resinic acids as alternative diesel fuel

Keskin A., Yasar A., GÜRÜ M., ALTIPARMAK D.

ENERGY CONVERSION AND MANAGEMENT , cilt.51, sa.12, ss.2863-2868, 2010 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of ethanol content on supercritical carbon dioxide extraction of caffeine from tea stalk and fiber wastes

İÇEN H., GÜRÜ M.

JOURNAL OF SUPERCRITICAL FLUIDS , cilt.55, sa.1, ss.156-160, 2010 (SCI-Expanded)

Effect of Al 2O 3 amount on microstructure and wear properties of Al-Al 2O 3 metal matrix composites prepared using mechanical alloying method

Ozyurek D., Tekeli S., Gural A., Meyveci A., Guru M.

Powder Metallurgy and Metal Ceramics , cilt.49, ss.289-294, 2010 (SCI-Expanded)

Processing of NaBH4 from NaBO2 with MgH2 by ball milling and usage as hydrogen carrier

RENEWABLE ENERGY , cilt.35, sa.9, ss.1895-1899, 2010 (SCI-Expanded)

Utilization of waste marble dust as an additive in cement production

ARUNTAŞ H. Y., GÜRÜ M., Dayi M., Tekin I.

MATERIALS & DESIGN , cilt.31, sa.8, ss.4039-4042, 2010 (SCI-Expanded)

Supported CoCl2 catalyst for NaBH4 dehydrogenation

RENEWABLE ENERGY , cilt.35, sa.4, ss.839-844, 2010 (SCI-Expanded)

Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a diesel engine

GÜRÜ M., Koca A., Can O., ÇINAR C., ŞAHİN F.

Renewable Energy , cilt.35, sa.3, ss.637-643, 2010 (SCI-Expanded)

The Investigation of Performance and Emissions Characteristics of Tall Oil Biodiesel With a Co-based Additive

Keskin A., Guru M., Altiparmak D.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.32, sa.20, ss.1899-1907, 2010 (SCI-Expanded)

Processing of urea-formaldehyde-based particleboard from hazelnut shell and improvement of its fire and water resistance

Guru M., Aruntas Y., Tuzun F. N., Bilici I.

FIRE AND MATERIALS , cilt.33, sa.8, ss.413-419, 2009 (SCI-Expanded)

Production of NaBH4 and hydrogen release with catalyst

RENEWABLE ENERGY , cilt.34, sa.11, ss.2362-2365, 2009 (SCI-Expanded)

Extraction of caffeine from tea stalk and fiber wastes using supercritical carbon dioxide

Icen H., GÜRÜ M.

JOURNAL OF SUPERCRITICAL FLUIDS , cilt.50, sa.3, ss.225-228, 2009 (SCI-Expanded)

Improvement of bitumen performance with epoxy resin

Cubuk M., GÜRÜ M., ÇUBUK M. K.

FUEL , cilt.88, sa.7, ss.1324-1328, 2009 (SCI-Expanded) Sürdürülebilir Kalkınma

Removal of Ferrous Ion in Synthetic Waters by Catalytic Air Oxidation

Engin B., GÜRÜ M., Alicilar A.

ASIAN JOURNAL OF CHEMISTRY , cilt.21, sa.3, ss.2067-2072, 2009 (SCI-Expanded)

Biodiesel production from waste animal fat and improvement of its characteristics by synthesized nickel and magnesium additive

GÜRÜ M., Artukoglu B. D., KESKİN A., Koca A.

ENERGY CONVERSION AND MANAGEMENT , cilt.50, sa.3, ss.498-502, 2009 (SCI-Expanded)

Biodiesel production from pomace oil and improvement of its properties with synthetic manganese additive

Caynak S., GÜRÜ M., Bicer A., KESKİN A., Icingur Y.

FUEL , cilt.88, sa.3, ss.534-538, 2009 (SCI-Expanded) Sürdürülebilir Kalkınma

Production of Polymer Matrix Composite Particleboard from Pistachio Shells and Improvement of its Fire Resistance by Fly Ash

GÜRÜ M., Sahin M., Tekeli S., Tokgoz H.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.28, sa.3, ss.191-195, 2009 (SCI-Expanded)

Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]-methacrylamide-co-acrylamide) Hydrogels

Demirel G. B., ÇAYKARA T., Demiray M., GÜRÜ M.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY , cilt.46, sa.1, ss.58-64, 2009 (SCI-Expanded)

Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal

ARGUN M. E., DURSUN Ş., Karatas M., GÜRÜ M.

BIORESOURCE TECHNOLOGY , cilt.99, sa.18, ss.8691-8698, 2008 (SCI-Expanded)

Removal of trivalent chromium from water using low-cost natural diatomite

GÜRÜ M., Venedik D., Murathan A.

JOURNAL OF HAZARDOUS MATERIALS , cilt.160, ss.318-323, 2008 (SCI-Expanded)

Processing of LiBH(4) from its elements by ball milling method

RENEWABLE ENERGY , cilt.33, sa.11, ss.2388-2392, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission

Keskin A., GÜRÜ M., ALTIPARMAK D.

BIORESOURCE TECHNOLOGY , cilt.99, sa.14, ss.6434-6438, 2008 (SCI-Expanded)

Hydrogen cycle with sodium borohydride

Guru M., Sarioz B. V., Cakanyildirim C.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.33, sa.17, ss.4634-4639, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

Preparation and characterization of alumina-zirconia composite material with different acid ratios by the sol-gel method

Ergu O. B., GÜRÜ M., Cabbar C.

CENTRAL EUROPEAN JOURNAL OF CHEMISTRY , cilt.6, sa.3, ss.482-487, 2008 (SCI-Expanded)

Microstructural, mechanical and electrical properties of alumina-doped cubic zirconia (c-ZrO(2))

Tekeli S., Kayis A., Guru M.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY , cilt.12, ss.791-797, 2008 (SCI-Expanded)

Using of cotton oil soapstock biodiesel-diesel fuel blends as an alternative diesel fuel

KESKİN A., GÜRÜ M., ALTIPARMAK D., AYDIN K.

RENEWABLE ENERGY , cilt.33, sa.4, ss.553-557, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

Microstructural design and high temperature tensile deformation behaviour of 8 mol% yttria stabilized cubic zirconia (8YCSZ) with SiO2 additions

Tekeli S., Guerue M.

CERAMICS INTERNATIONAL , cilt.34, sa.1, ss.137-140, 2008 (SCI-Expanded)

Production of polymer matrix composite particleboard from walnut shell and improvement of its requirements

G r M., Atar M., Yildirim R.

MATERIALS & DESIGN , cilt.29, sa.1, ss.284-287, 2008 (SCI-Expanded)

Oxidative desulfurization of cayirhan lignites by permanganate solution

Guru M., Tuzun F. N., Murathan A. S., Asan A., Kiyak T.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.30, sa.16, ss.1508-1515, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

Oxidative desulfurization of tufanbeyli coal by hydrogen peroxide solution

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.30, sa.11, ss.981-987, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

Processing of Cer-Met Composite Material from Zn and B2O3

Guru M., Tekeli S., Cakanyildirim C., Cabbar C.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.27, sa.4, ss.243-248, 2008 (SCI-Expanded)

Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828-EPIKURE 3090 and DURATEK KLM 606a-DURATEK KLM 606b

Tuezuen F. N., Guerue M., Akyuez Y.

POLYMER COMPOSITES , cilt.28, sa.6, ss.762-770, 2007 (SCI-Expanded)

Preparation and characterization of poly(isobutyl methacrylate) microbeads with grafted amidoxime groups

Caykara T., Alaslan S. S., Guerue M., Bodugoez H., Gueven O.

RADIATION PHYSICS AND CHEMISTRY , cilt.76, sa.10, ss.1569-1576, 2007 (SCI-Expanded)

Biodiesel production from tall oil with synthesized Mn and Ni based additives: Effects of the additives on fuel consumption and emissions

Keskin A., Guru M., Altiparmak D.

FUEL , cilt.86, ss.1139-1143, 2007 (SCI-Expanded)

Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends

Altiparmak D., Keskin A., Koca A., Guru M.

BIORESOURCE TECHNOLOGY , cilt.98, sa.2, ss.241-246, 2007 (SCI-Expanded) Sürdürülebilir Kalkınma

Synthesis and processing of Al sheathed MgB2 tapes by powder in tube method and determination of superconducting and mechanical properties

Akyuez Y., Bicer A., Guerue M.

MATERIALS & DESIGN , cilt.28, sa.9, ss.2500-2504, 2007 (SCI-Expanded)

Oxidative desulfurization of askale coal by nitric acid solution

Guru M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.29, sa.5, ss.463-469, 2007 (SCI-Expanded) Sürdürülebilir Kalkınma

Densification and grain-growth behavior of various amounts of SiO2 doped 8YSCZ/SiO2 composites

Tekeli S., Gürü M., Saglam O. E.

MATERIALS AND MANUFACTURING PROCESSES , cilt.22, ss.710-714, 2007 (SCI-Expanded)

Manufacturing low density boards from waste cardboards containing aluminium

Murathan A. M., Murathan A. S., Guerue M., Balbaşı M.

MATERIALS & DESIGN , cilt.28, sa.7, ss.2215-2217, 2007 (SCI-Expanded) Sürdürülebilir Kalkınma

Biodesulfurization of cayirhan lignites

Guru M., Cubuk M., Dursun S., Demirbas A.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.28, sa.6, ss.559-565, 2006 (SCI-Expanded) Sürdürülebilir Kalkınma

Manufacturing of urea-formaldehyde-based composite particleboard from almond shell

Guerue M., Tekeli S., Bilici I.

MATERIALS & DESIGN , cilt.27, sa.10, ss.1148-1151, 2006 (SCI-Expanded)

Synthesis and characterization of Mg2B2O5

Qasrawi A., Kayed T., Mergen A., Guru M.

MATERIALS RESEARCH BULLETIN , cilt.40, sa.4, ss.583-589, 2005 (SCI-Expanded)

Investigation on the kinetics of oxalic acid synthesis

Guru M., Benli S., Akyuz Y., Alicilar A.

CELLULOSE CHEMISTRY AND TECHNOLOGY , cilt.39, ss.49-53, 2005 (SCI-Expanded)

The factors affecting colloidal processing of 8YSCZ ceramics

Tekeli S., Guru M.

HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 , ss.729-734, 2005 (SCI-Expanded)

Effect of temperature and gas flow rate on SO2 sorption in a reactor with periodic liquid flow and active carbon

Guru M., Ozkan G., Murathan A., Öksüz İ.

FRESENIUS ENVIRONMENTAL BULLETIN , cilt.14, sa.5, ss.400-405, 2005 (SCI-Expanded)

Obtaining of caffeine from Turkish tea fiber and stalk wastes

Guru M., Icen H.

BIORESOURCE TECHNOLOGY , cilt.94, sa.1, ss.17-19, 2004 (SCI-Expanded)

Infiltration of Al alloys into MgAl2O4 under different atmospheres

Bilen M., Mergen A., Guru M., Alicilar A.

EURO CERAMICS VIII, PTS 1-3 , ss.1795-1798, 2004 (SCI-Expanded)

Improvement of adhesion of bitumen - Aggregate coatings by additives

Guru M.

CELLULOSE CHEMISTRY AND TECHNOLOGY , cilt.38, ss.129-140, 2004 (SCI-Expanded)

Production of anorthite from kaolinite and CaCO3 via colemanite

Mergen A., Kayed T., Bilen M., Qasrawi A., Guru M.

EURO CERAMICS VIII, PTS 1-3 , ss.1475-1478, 2004 (SCI-Expanded)

The removal of cyanides from water by catalytic air oxidation in a fixed bed reactor

Alicilar A., Komurcu M., Guru M.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION , cilt.41, sa.6, ss.525-529, 2002 (SCI-Expanded)

Improvement of Diesel fuel properties by using additives

Guru M., Karakaya U., Altiparmak D., Alicilar A.

ENERGY CONVERSION AND MANAGEMENT , cilt.43, sa.8, ss.1021-1025, 2002 (SCI-Expanded)

Production of oxalic acid from sugar beet molasses by mixed nitric acid and sulphuric acid

Guru M., Pamuk V., Bilgesu A.

CELLULOSE CHEMISTRY AND TECHNOLOGY , cilt.36, ss.81-91, 2002 (SCI-Expanded)

Air oxidation of aqueous sulphide solutions in packed columns

Alicilar A., Karadavut S., Guru M.

FRESENIUS ENVIRONMENTAL BULLETIN , cilt.10, sa.7, ss.620-623, 2001 (SCI-Expanded)

Production of oxalic acid from sugar beet molasses by formed nitrogen oxides

Guru M., Bilgesu A., Pamuk V.

BIORESOURCE TECHNOLOGY , cilt.77, sa.1, ss.81-86, 2001 (SCI-Expanded) Sürdürülebilir Kalkınma

ESR spectroscopics study of radicals formed from methoxycarbonylcholine picrate hemihydrate

Birey M., Aktas H., Alicilar A., Guru M.

RADIATION EFFECTS AND DEFECTS IN SOLIDS , cilt.140, ss.365-371, 1997 (SCI-Expanded)

OPTIMIZATION OF A DOUBLE-STAGE FLASH SYSTEM

ALICILAR A., DOGAN M., GURU M.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH , cilt.19, sa.2, ss.169-179, 1995 (SCI-Expanded)

Küresel dolgulu ve aşağı doğru paralelakışlı reaktörlerde kolon uzunluğunun basınç düşüşüne etkisi

Alıcılar A., Gürü M., Murathan A. M.

Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.9, sa.1, ss.53-60, 1994 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Fenol ve bor esaslı çevre dostu pigmentin deniz araçlarında boya olarak kullanılabilirliği

OLGUN Ş., GÜRÜ M., YILMAZ AYDIN D., ERTÜRK A. A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.26, sa.1, ss.215-221, 2023 (ESCI)

Investigation of the effects of synthetic manganese additive and fusel oil-gasoline mixtures on performance and emissions in a spark ignition engine

Ustun S., GÜRÜ M.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.25, sa.1, ss.443-454, 2022 (ESCI)

Pilot yorgunluğu açısından uçuş teçhizatının değerlendirilmesi

Gevrek İ., GÜRÜ M., BAŞER F.

Savunma Bilimleri Dergisi , cilt.42, ss.89-118, 2022 (Hakemli Dergi)

Uçucu Külün Yapı Malzemelerinin Mukavemeti ve Bağlayıcılığına Etkisinin Araştırılması

ÇUBUK M., GÜRÜ M., ARSLAN D., ÖZDEMİR O.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.5, ss.2128-2143, 2021 (Hakemli Dergi)

Synthesis of magnesium diboride (MgB2) from its elements by mechanochemical method and usage as energetic agent

Canoz B., Metin A. U., GÜRÜ M.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.24, sa.3, ss.933-941, 2021 (ESCI)

Kalsiyum floroborat sentezi, kinetik ve alev geciktirici özelliklerinin belirlenmesi

GÜRÜ M., GÜNGÖR G., YILMAZ AYDIN D., ÇAKANYILDIRIM Ç.

BOR DERGİSİ , cilt.6, sa.3, ss.326-331, 2021 (Hakemli Dergi)

Developments in Aluminum Production Technologies, Environmental Impact and Application Areas

YILMAZ AYDIN D., GÜRÜ S., GÜRÜ M.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.24, sa.2, ss.585-592, 2021 (ESCI) Sürdürülebilir Kalkınma

Preparation of Bauxite/Deionized Water Nanofluid and Experimental Investigation of its Thermophysical Properties

Aydin D. Y., GÜRÜ M., SÖZEN A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.24, sa.2, ss.355-359, 2021 (ESCI)

Effect of Alkaloids on SARS-CoV-2

NATURENGS , ss.10-18, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Thermal Performance Improvement of the Heat Pipe by Employing Dolomite/Ethylene Glycol Nanofluid

Aydin D. Y., Gürü M., Sözen A., Çiftçi E.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED , cilt.9, sa.1, ss.23-27, 2020 (ESCI)

Upgrading of Performance of Diffusion Absorption Refrigeration System

ÖZTAŞ S., GÜRÜ M., SÖZEN A., Kilinc C., GÜLSEVEN Z.

Journal of Environmental Science and Engineering Technology , cilt.7, sa.1, ss.35-44, 2019 (Hakemli Dergi)

Experimental Investigation of Thermophysical Properties of Nano Mineralogical Fluids

Karakaya U., GÜRÜ M., SÖZEN A., Aydin D. Y., BİLİCİ İ.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.22, sa.3, ss.619-626, 2019 (ESCI)

Nano mineralojik akışkanların termofizikselözelliklerinin deneysel olarak incelenmesi

Karakaya U., GÜRÜ M., SÖZEN A., YILMAZ AYDIN D., BİLİCİ İ.

Politeknik Dergisi , 2019 (Hakemli Dergi)

Modelling of High Energy Impacted Ball Milling and Ball Motion by Finite Element Analysis

Aktas A. R., Aktas G., GÜRÜ M.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.30, sa.2, ss.187-194, 2017 (ESCI) Sürdürülebilir Kalkınma

Production of Ti-Fe Based MgAl2O4 Composite Material by Pressureless Infiltration Method

Bilici I., Guru M., Tekeli S.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.28, sa.2, ss.295-299, 2015 (ESCI)

Production of Ti Fe Based MgAl2O4 Composite Material by Pressureless Infiltration Method

BİLİCİ İ., GÜRÜ M., TEKELİ S.

Gazi University, Journal of Science , 2015 (Scopus)

Baca gazlarındaki azot oksitlerin bentonit üzerine adsorpsiyon yoluyla dolgulu kolonlarda giderilmesi,

Alıcılar A., Gürü M., Murathan A. M., Akkurt F.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.16, sa.2, ss.319-325, 2003 (Hakemli Dergi)

Atık sulardan civanın dolgulu yataklarda giderilmesi,

Murathan A. M., Gürü M., Özkan G.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.15, sa.1, ss.113-119, 2002 (ESCI)

Atık sulardaki fenol ve hidrazinin dolgulu kolonlarda giderimi

Gürü M., Murathan A. M.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.13, sa.2, ss.415-423, 2000 (ESCI)

Dispers sarı3 tekstil boyarmaddesinin sentezi ve uygulanabilirliği

Alıcılar A., Murathan A. M., Gürü M.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.13, sa.1, ss.221-227, 2000 (ESCI)

Atık kağıtlardan levülinilikasit eldesi, 11(4), 771-777, 1998

Gürü M., Murathan A. M.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.11, sa.4, ss.771-777, 1998 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Detection of Human Errors with HAZOP and Analyzed with HEART in a Chemical Facility

Olgun K., Gürü M., Akman A.

2 ndInternational Congress on Multidisciplinary Natural Sciences and Engineering, Ankara, Türkiye, 1 Kasım - 02 Aralık 2022, ss.138

Manyetik Alanın Bir Isı Borusunun Termal Performansına Etkisi

YILMAZ AYDIN D., AYDIN E., GÜRÜ M.

4. Int. Conference on Applied Engineering and Natural Sciences (ICAENS2022), Konya, Türkiye, 10 - 13 Kasım 2022, ss.1406-1409

Sentetik Borlu Bileşiklerin Bitümlü Kaplamalarda Kullanımı

Gürü M., Arslan D., Çubuk M. K.

International Boron Symposium, İstanbul, Türkiye, 5 - 07 Ekim 2022, ss.288-289

Bor Bileşiklerinin Boya Olarak Uygulanabilirliği

AKSONGUR T., GÜRÜ M.

Int. Korkut Ata Scientific Researches Conference, Osmaniye, Türkiye, 28 - 30 Haziran 2022

Bakır Tetrafloraborat’ın Sentez Parametrelerinin Belirlenmesi

BOZTAŞ İ., GÜRÜ M.

Int. Korkut Ata Scientific Researches Conference, Osmaniye, Türkiye, 28 - 30 Haziran 2022

Determination of Kinetic Parameters on the Catalytic Dehydrogenation of NaBH4 by Synthetic MOFs Supported Catalyst

ERTÜRK A. A., AKKAŞ BOYNUEĞRİ T., GÜRÜ M.

6. Int. Hydrogen Technologies Congress, 23 - 26 Ocak 2022

Radar İz Düşürücü (RAM) Pigment Üretimi

GÜRÜ M., AKTAŞ G., AKTAŞ A. R.

III. Uluslararası Savunma Teknolojileri Sempozyumu, 06 Ekim 2021

Boron reserves in Turkey and opportunities offered by

Çakanyıldırım Ç., Gürü M.

INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE & ENGINEERING AND HIGH TECH DEVICE APPLICATIONS, Ankara, Türkiye, 2 - 05 Ekim 2020, ss.235

FROM MINERAL DEPOSITS TO MARKETS, VALUABLE PRODUCT BORON

Gürü M., Çakanyıldırım Ç.

2. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Türkiye, 18 - 19 Eylül 2021

Determination of synthesis parameters of phenylfluoroborate,

OLGUN Ş., GÜRÜ M., YILMAZ AYDIN D., ERTÜRK A. A.

ULUSLARARASI ASYA MODERN BİLİMLER KONGRESİ-V, Azerbaycan, 1 - 02 Haziran 2021, ss.1064-1068

H2 Release from NaBH4 with Novel Catalyst, 5th Int Hydrogen Technologies Congress

Ertürk A. A., AKKAŞ BOYNUEĞRİ T., GÜRÜ M.

IHTEC, Türkiye, 26 - 28 Mayıs 2021

Investigation of Synthesis Parameters of Sodium Fluoroborate and Usability as Flame Retardant for Cotton Fabrics

Yılmaz Aydın D., Gürü M., Akkurt F.

3rd International Conference on Physical Chemistry & Functional Materials (PCFM2020), Malatya, Türkiye, 22 - 24 Eylül 2020, ss.167-174

Alüminyum Uç Ürünlerine Teknolojik Gelişmeler

GÜRÜ M., ÇAKANYILDIRIM Ç.

The International ALUMINIUM-THEMED Engineering and Natural Sciences Conference, 4 - 06 Ekim 2019

EXTRACTION OF QUERCETIN AND APIGENIN COMPOUNDS FROM JUNIPERUS EXCELSA (M. BIEB) BERRIES USING SUPERCRITICAL CARBON DIOXIDE

Himmetoğlu M., GÜRÜ M., Nuralin L.

The International ALUMINIUM-THEMED Engineering and Natural Sciences Conference, 4 - 06 Ekim 2019

Investigation of Thermophysical Properties of Dolomite Nanofluid

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Effects of Nanoparticle Concentration and Surfactant Types on Thermal Performance of the Aqueous Bauxite Nanofluid in a Heat Pipe

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Enhancement of Heat Transfer Characteristics of a Heat Pipe by Utilizing Dolomite/Ethylene Glycol Nanofluid

7th European Conference on Renewable Energy Systems, Madrid, İspanya, 10 - 12 Haziran 2019

Impacts of the Base Fluid Species on the Thermal Performance of the Nanofluid Used in a Heat Pipe

Güngör G., YILMAZ AYDIN D., GÜRÜ M.

7th European Conference on Renewable Energy Systems, 10 - 12 Haziran 2019

Kalsiyum Oksitten Kalsiyum Floroborat Sentezi ve Alev Geciktirici Olarak Kullanılabilirliği , Uluslararası Bor Sempozyumu

Boron2019, 17 - 19 Nisan 2019

Mekanokimyasal ve Yaş Yöntemle Kurşun Floroborat Üretiminin Optimizasyonu

Kurt H., GÜRÜ M., YILMAZ AYDIN D., AKKURT F., İÇEN H., Kuru F., et al.

International Symposium on Boron (BORON2019), 17 - 19 Nisan 2019

Obtainment of Copper(II) Fluoroborate by High Energy Impacted Ball Milling

YILMAZ AYDIN D., GÜRÜ M., İPEK D., ÖZYÜREK D.

8th International Advances in Applied Physics and Materials Science Congress Exhibition, 24 - 30 Nisan 2018

SYNTHESIS and CHARACTERIZATION of SODIUM BOROHYDRIDE from SODIUM AMIDE by MECHANOCHEMICAL REACTION

AR İ., usta ö., GÜRÜ M.

Int. Advanced researches and Engineering Congress, Osmaniye, Türkiye, 16 - 17 Kasım 2017

INVESTIGATION of PERFORMANCE of a NOVEL SYNTHETIC CATALYST in DEHYDROGENATION of SODIUM BOROHYDRIDE

GÜRÜ M., usta ö., AR İ.

Int. Advanced researches and Engineering Congress, Osmaniye Korkutata Üniversitesi, 16 - 17 Kasım 2017

Synthesis of Lead Fluoroborate and Usability as Flame Retardant

YILMAZ AYDIN D., KURT H., KANDEMİR E. B., GÜRÜ M.

8th International Advanced Technologies Symposium (IATS’xx17), Elazığ, Türkiye, 19 - 22 Ekim 2017

Synthesis of Antimony Fluoroborate and Usability as Flame Retardant

YILMAZ AYDIN D., PATLAR K., GÜRÜ M., AKKURT F.

8th International Advanced Technologies Symposium (IATS’xx17, Elazığ, Türkiye, 19 - 22 Ekim 2017

Yaş Yöntemle Titanyum Floroborat Sentezi Ve Alev Geciktirici Olarak Kullanılabilirliği

GÜRÜ M., YILMAZ AYDIN D., SEDİR P., AKKURT F.

İleri Teknolojiler V. Çalıştayı, İstanbul, Türkiye, 23 Ekim 2017

Experimental Investigation of the Effect of Nanoparticle Size on the Performance of Thermosyphon with Clinoptilolite /Water Nanofluid

GÜRBÜZ E. Y., ÇİFTÇİ E., SÖZEN A., GÜRÜ M., KARAKAYA U.

1st International Conference on Energy Systems Engineering, Karabük, Türkiye, 2 - 04 Kasım 2017

Effect of milling time on wear behaviours of carbon nanotubes reinforced aluminium matrix composites

GÖKDAİ D., AKPINAR BORAZAN A., GÜRÜ M.

5th International Conference on Powder Metallurgy Advanced Materials, 17 - 20 Eylül 2017

RECOVERY OF CALCIUM METABORATE AND RE-SYNTHESIS OF CALCIUM BOROHYDRIDE BY THEMECHANOCHEMICAL REACTION

KARABULUT A. F., GÜRÜ M.

ECRES 5, Sarajevo, Bosna-Hersek, 27 - 30 Ağustos 2017

CATALYTIC PERFORMANCE OF ACTIVATED CARBON SUPPORTED COBALT (II) FLUORIDE IN DEHYDROGENATIONOF METAL BOROHYDRIDES

KARABULUT A. F., GÜRÜ M.

ECRES 5, Sarajevo, Bosna-Hersek, 27 - 30 Ağustos 2017

Effect of Chicken Feather and Boron Compounds as Filler on Mechanical and Flame Retardancy Properties of Polymer Composite Materials

15th International Conference on Environmental Science and Technology(CEST 2017), Rodos, Yunanistan, 31 Ağustos - 02 Eylül 2017

Co-Ni-Cu Supported on TiO2 and Al2O3 to Decompose NaBH4

Özsaçmacı G., ÇAKANYILDIRIM Ç., GÜRÜ M.

13th European Congress on Catalyst, Europacat 2017, FLORANSA, İtalya, 27 - 31 Ağustos 2017

A RESEARCH ON RHEOLOGICAL PROPERTIES OF BITUMEN MODIFIED BY MOLASSES-BASED FLY ASH COMPOUND

ÖZTÜRK Ş., ARSLAN D., ÇUBUK M. K., GÜRÜ M.

International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017

Kinetic Modelling on Catalytic Dehydrogenation of NaBH4 Hydrogel Based CoF2 Catalyst

Akkaş Boynuegri T., GÜRÜ M.

7. Uluslar arası 100 Yenilenebilir Enerji Konferansı IRENEC 2017, 18 - 20 Mayıs 2017

Investigation of the Effects on the Thermal Performance of the SiC/Water Nanofluid Utilization in Heat Pipes

ÇİFTÇİ E., SÖZEN A., GÜRÜ M., KILINÇEL M.

2nd International Conference on Viable Energy Trends, Helsinki, Finlandiya, 28 - 30 Nisan 2017

metal borides as energetic materials

Bilal C., METİN A. Ü., GÜRÜ M.

2. international defence industry symposium, 06 Nisan 2017

Mekanokimyasal Yöntemle Bakır Floroborat Sentezi ve Karakterizasyonu

İPEK D., YILMAZ AYDIN D., GÜRÜ M.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), 26 - 28 Ekim 2016, ss.4492-4499

Yaş Yöntemle Çinko Floroborat Sentezi ve Alev Geciktirici Olarak Kullanılabilirliği

YILMAZ AYDIN D., İPEK D., GÜRÜ M.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), 26 - 28 Ekim 2016

CATALYTIC DEHYDROGENATION OF CALCIUM BOROHYDRIDE BY USING HYDROGEL CATALYST

AKKAŞ BOYNUEĞRİ T., GÜRÜ M.

4th European Conference on Renewable Energy Systems, 28 - 31 Ağustos 2016

A NEW APPROACH TO THE MANUFACTURING AND CHARACTERIZATION OF ELEMENTAL BORON FROM BORON OXIDE BY CARBON MONOXIDE

GÖKDAİ D., GÜRÜ M., TOĞRUL T.

4th European Conference on Renewable Energy Systems, 28 - 31 Ağustos 2016

Effectof of Sintering Time on Hardness and Wear Behaviours of Carbon Nanotubes Reinforced Aluminium Matrix Composites